|
seeyouonthetrail 08-31-2009, 08:46 PM Anybody in the area of OKC or Going to Disney, OK this weekend have a Tail shaft houseing for an np231 6 banger (89) and a Driveshaft (rear)? Trying to get my Rig Ready to go and Thought I Had all the parts But they were off of a 4 banger (95) so it didn't work!! Please Help Thanks Allen Seeyouonthetrail UCTJ 09-01-2009, 06:07 AM I have a stock tailhousing I took off my NP231 when I did a SYE. Its out of a 02 TJ w/4.0 dont know if thats what your looking for or if it can help. I am at work so I cant post pictures and wont get home till about 8pm at the earliest. jayz8886 09-01-2009, 09:31 AM Man there are tons of Cherokees at pull-apart in the city. apeters89 09-01-2009, 12:18 PM Anybody in the area of OKC or Going to Disney, OK this weekend have a Tail shaft houseing for an np231 6 banger (89) and a Driveshaft (rear)? Trying to get my Rig Ready to go and Thought I Had all the parts But they were off of a 4 banger (95) so it didn't work!! Please Help Thanks Allen Seeyouonthetrail the tail housings should be identical :confused: The driveshafts will be different lengths, but the splines on the outpt shaft should be the same too. I thought the only difference was the input splines. seeyouonthetrail 09-01-2009, 01:11 PM the tail shaft houseing are different mine has only three bolts and is long and slender! and the 95 yj is shorter adn wider with five bolts also there is another large hole in the side of it!! I thought they were identical also till now DOH!! apeters89 09-01-2009, 07:28 PM the tail shaft houseing are different mine has only three bolts and is long and slender! and the 95 yj is shorter adn wider with five bolts also there is another large hole in the side of it!! I thought they were identical also till now DOH!! Got any pictures? :confused: seeyouonthetrail 09-02-2009, 06:24 AM http://img193.imageshack.us/img193/5997/img00479.jpg http://img140.imageshack.us/img140/5638/img00480.jpg I Looked at 2 xj"s yesterday and I Think the housing will work I'll let Ya know later today after I got to Pull apart Al apeters89 09-02-2009, 06:50 PM http://img193.imageshack.us/img193/5997/img00479.jpg http://img140.imageshack.us/img140/5638/img00480.jpg I Looked at 2 xj"s yesterday and I Think the housing will work I'll let Ya know later today after I got to Pull apart Al that's what mine looked like too. Wish i still had it, i'd give it to ya. seeyouonthetrail 09-08-2009, 09:31 AM I did Find one at pull apart! They do Have plenty of XJ's there and the Same Tail shaft houseing is on the NP231 as the 241! 3.25 Cents!!! Shady crook (Shady nook) quoted me 50 Bucks!! What a Joke! I'll Never call them or darken their door again! But I did find a another Jeep place you guys might want to know about it's on Robinson and I Think tenth! Called A&P Al jayz8886 09-08-2009, 02:13 PM Gotta love pull apart! | |