I looked on Auto Zone's site, they don't show them in stock.

I looked at Napa's site, they only show one side available.

How much am I looking at? I don't have cores :(

Where has em in stock?

No, we don't have junkyards here:rolleyes:

i got my loaded ford calipers at napa and they had em in stock, like 75 bucks a piece i think it was. jiMMy

what's the deal with "loaded" calipers?

spring loaded or something?

They come with pads.

how much are you willing to pay for a used set or a set of cores? I have some. Opposite coast, though.:(

$60/side loaded at Bumper 2 Bumper, w/core.

J. J.

Originally posted by patooyee
$60/side loaded at Bumper 2 Bumper, w/core.

J. J.

Thats a :smokin: price!!

Rockauto.com

loaded semi metallic pads are
32.73 +25.00 core total $ 57.73

unloaded
23.05 + 25.00 core total $48.05

I used a 1980 K30 for the look up

Originally posted by Old Scout
Rockauto.com

loaded semi metallic pads are
32.73 +25.00 core total $ 57.73

unloaded
23.05 + 25.00 core total $48.05

I used a 1980 K30 for the look up

That is *probably* for 1/2 and 3/4 ton. Almost every time I go to the parts houses for 1 ton stuff they get the smaller stuff. The books and 'puters seem to always give wrong numbers.

Originally posted by Aggro


That is *probably* for 1/2 and 3/4 ton. Almost every time I go to the parts houses for 1 ton stuff they get the smaller stuff. The books and 'puters seem to always give wrong numbers.

Nope your wrong! The cardone # check out and the raybestos # are good as well. :flipoff2:

I'm 3.00 less that patooyee , and you say my shit stinks and his is
:smokin: ?:rolleyes:

Originally posted by Old Scout


Nope your wrong! The cardone # check out and the raybestos # are good as well. :flipoff2:

I'm 3.00 less that patooyee , and you say my shit stinks and his is
:smokin: ?:rolleyes:

Get over it! Your shit does stink. Unless you have a 60 caliper in your hand to confirm, I have found that the books and 'puters are wrong.

Just what I have found from experience.
Half the places that sell them, sell a 44 loaded caliper for more than what you posted for a 60.
IF you KNOW the prices are correct and it is for the correct part then you deserve a brownie button.
:flipoff2: :rolleyes: :D

Originally posted by Aggro


Get over it! Your shit does stink. Unless you have a 60 caliper in your hand to confirm, I have found that the books and 'puters are wrong.

Just what I have found from experience.
Half the places that sell them, sell a 44 loaded caliper for more than what you posted for a 60.
IF you KNOW the prices are correct and it is for the correct part then you deserve a brownie button.
:flipoff2: :rolleyes: :D

Now your name makes sence:rolleyes:

So what are the right part #s? iF YOUR SOOO SURE MINE ARE WORNG?

Originally posted by Old Scout


Now your name makes sence:rolleyes:

So what are the right part #s? iF YOUR SOOO SURE MINE ARE WORNG?

You have quoted all my posts. You show me where I said you were wrong. I have not once said for sure your part number are incorrect. There is no need for put downs. All I am saying is "in my experience" the parts dummies will, 9 times out of 10 give ME 3/4 ton parts when I ask for 1 ton. It is not them making the error- the book or 'puter is wrong.

:rolleyes: :confused: :rolleyes: :confused:

Got my stuff at napa in canada. All prices are in CDN $$$.
Calipers - $53 with core (I think the core was around 20-30 bucks)
Pads - $27
Rotors - $54
U-joints - $49
Caliper hold down kit - $11
Thats it so far..

any one know where to get them in TX ?

I'm putting new bearings/rotors/calipers on my 60 front and I was quoted $310.00 for everything at "Advance Auto"...:eek: :eek: After dumping $$$ for a 60 ARB I'm a rolling change.....

PS: I would hate to order that stuff and it end up being 3/4 ton.......S&H would kill me....:eek: