Whats up.. this thing is bullet proof except for this one bolt... I break one every 2-3 tanks

Thanks

Send them to Dean at Cryogenics and get them Cryoed.

You can tap the hole for a M5 bolt or if you need a clutch support, look into a turtle racing clutch setup.

Few options:

DIY
http://www.hpibajaforum.com/forum/showthread.php?t=66616

BLING $$$
http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4813/.f

Mine does the same thing.
There are some slightly stronger bolts available for it,
but your only real solution is to drill and tap it for a larger dia. high grade bolt.

Amazing the beating the Bajas will take isnt it?!

~John

Mine does the same thing.
There are some slightly stronger bolts available for it,
but your only real solution is to drill and tap it for a larger dia. high grade bolt.

Amazing the beating the Bajas will take isnt it?!

~John

I manage to actually break a crosspin a few weeks back.:laughing::eek:

If you don't feel like modifying it to take a bigger bolt, or dropping the cash for the Turtle clutch system, you might look at a higher grade bolt. DDM sells a 12.9 grade bolt. I installed one when I built my SS, and almost 2 gallons later, it is still in one piece.

http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.2427/.f

If you don't feel like modifying it to take a bigger bolt, or dropping the cash for the Turtle clutch system, you might look at a higher grade bolt. DDM sells a 12.9 grade bolt. I installed one when I built my SS, and almost 2 gallons later, it is still in one piece.

http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.2427/.f

bought few of em and some other goodies

- mounted paddles F/R
- Light rack
- Hostile spur gears