have full width axles under my explorer and looking for some ideas/pics for my coil buckets, dont like the stock design.

post some pics of what u got to start with!

basicly i had stock 70's buckets with a spacer behind it, now this is what i have

http://i140.photobucket.com/albums/r29/brandon916_photo/e.jpg

when i did mine on my bronc ii the frame was rotted pretty thin behind the buckets so i had to plate the side of the frame with 1/4". then i made new buckets that had the coil pocket out about and 1" from the frame. easy as pie
shit pics but its all i got

http://i451.photobucket.com/albums/qq236/gdsvfr800/0342.jpg

http://i451.photobucket.com/albums/qq236/gdsvfr800/008.jpg

http://i451.photobucket.com/albums/qq236/gdsvfr800/PIC-0337.jpg

Ballistic makes some bad ass adjustable ones for like $65 a set. They're what I'm gonna run when I go from 1/2 ton to 1 ton on my Exploder.

i used the HD ones from bronco graveyard for early bronco. There built tought, and fit in very nicely, i notched the frame on driver side, and welded the bucket arround th e cut for reinforcement,

Check these out.

http://www.jamesduff.com/newproducts/new_eb.asp

I used stock 79 buckets. I then spaced them out 2"s on each side.