well we got a deal on a customers old chevy tracker. like a 50 dollar deal! :grinpimp: plans are too do a 2" lift, 31's, trim fenders, camo, make bumpers and sliders.....

what we started with.. a molson inday special...:shaking:

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture009-10.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture010-8.jpg

interior shot..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture012-7.jpg

the first thing too go was the decals...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture015-8.jpg

then masked and primed..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture016-6.jpg

then i put it on the hoist and moved under neath....

removed stock exhaust and cats. replaced with 2" and just a resonator...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture018-7.jpg

Who masked that thing for you? Helen Keller?

this is the kit i am using. i am a distrubuter for S&R CUSTOMS. this kit is very well designed and comes with complete instructions. I used shocks for a 91 crown vic and moog camber bolts. ( which arnt included in the kit).

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture003-16.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture004-17.jpg

stock rear suspension..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture005-14.jpg

i also picked up a set of 4dr tracker coils. my theory on this is higher spring rate equals higher payload for bumpers and such.

4dr coils are on the right..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture016-7.jpg

and installed...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture006-15.jpg

Who masked that thing for you? Helen Keller?

lol you cant see the black masking tape that i used as the base...:flipoff2:

you must remove upper spring pad and reinstall onto new spacer. i used urethane too glue the uypper spacer in so no rattles down the road.

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture010-9.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture011-8.jpg

stock front suspension dissambled..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture007-9.jpg

front strut spacer installed..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture015-9.jpg

and front suspension reinstalled..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture017-7.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture018-8.jpg

lol you cant see the black masking tape that i used as the base...:flipoff2:


Just fawkin' with ya'. Cool project.

It looks like it is OD in color now. Is that more primer or the final color?

moving onto my redneck filter system..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture008-6.jpg

large holes drilled into the bottom of the airbox..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture009-11.jpg

topped off by a k&n filter...



http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture021-5.jpg

on the ground with new shoes..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture020-8.jpg

starting my " camo". i made a template of our shop logo and am goingtoo spray a couple diff colors...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture022-4.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture023-3.jpg

That's good thinkin to advertise like that for your shop!

That's good thinkin to advertise like that for your shop!

thanks bud.. just tryin too be diferent....yo

some update pics...trimmed the front fenders so the tires could move...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture002-18.jpg

ya gotta like it when you can flex out ur rig with a floor jack and a piece of wood... maybe not...:shaking:

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture001-17.jpg


thats max flex for the rear..lol

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture003-17.jpg

had too trim the rear fender lip off.. tires fit nicely under full stuff now tho...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture004-18.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture005-15.jpg

pick up the warn premium hubs tom am..:grinpimp:

I'm digging this! Makes me want one! :D

Who masked that thing for you? Helen Keller?:lmao::lmao::lmao::lmao:

more new parts showed up today.. warn premiums.. these thigns r BEEF for such a lil truck...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture006-16.jpg

and installed...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture007-10.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture008-7.jpg

Awwww, I was hoping you'd at least throw some solid axles under that pip-squeak!

Awwww, I was hoping you'd at least throw some solid axles under that pip-squeak!


dude you just named the truck...

PIP SQUEAK it is..yo . thanks!

and yes maybe next year...:grinpimp:

So not being familiar with Sidekicks/Trackers I've gotta ask...what's with the 4 bolts on the rear axle flange?

dude you just named the truck...

PIP SQUEAK it is..yo . thanks!

HAHA!!! Glad I could help!....seems a fitting name.:smokin:

yeh this is looking fun. i love camo that made from decals, etc...not leaves or mil spec

its always good to see something different then the norm plus with the deal you got on it i would beef up pip squeak too :smokin:

I'm digging this! Makes me want one! :D



dooo eeet!

So not being familiar with Sidekicks/Trackers I've gotta ask...what's with the 4 bolts on the rear axle flange?

those are the the rear axle bolts... no c clips

its always good to see something different then the norm plus with the deal you got on it i would beef up pip squeak too :smokin:


thank you sir....:)


and big94 gmc..i am getting a decal made for the back window.." PIP SQUEAK"

i'll post a pic for ya!

some interior updates...

the old...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture001-19.jpg

the new..

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture002-20.jpg

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture003-18.jpg

I had a driver seat just like that till last week. That theng is pimp. rig looks like some fun

thanks glenns89..

got it outside today for the first time...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture005-16.jpg


i still have too rock gaurd the lower half...

http://i201.photobucket.com/albums/aa104/HEAVY_METALYO/album2/Picture004-19.jpg

is it going ot be street driven? those fronts look like they are sitting a little to the outer edge

is it going ot be street driven? those fronts look like they are sitting a little to the outer edge


good eye.. i still have too install the front camber bolts and the welded third member.