: questions on a 85 balzer


RAM POWER
09-16-2009, 09:51 PM
I have a 85 k5 blazer. I also have a 73 chevy pickup standard cab. I was wondering if the door or if even the windows and regulators where interchangable.



thaks

Ram Power

ffp00ch214
09-16-2009, 09:55 PM
the doors are the same, the door panels handle and crank will be different but thats just cosmetic and interchangeable also.

RAM POWER
09-16-2009, 10:00 PM
thanks thats all I needed to know. I am putting the manual cranks out of the 73 into the blazer

Fast68
09-16-2009, 11:03 PM
'73-76 shells differ in that the panels area is smaller on them than in '77-up

i dont see how you could interchange the panels but its worth a shot i suppose

all different hardware and panels and panel area size



even the regulators '73-76 differ from '77-up because in '77-up the crank shafts are much longer because the door panels are thicker than '73-76

you will see the regulators are different from 73 to the 85

most noobs dont realize or know the 77-up thing

i would just swap entire doors

because not much of anything technically interchanges except the wing vents

RAM POWER
09-18-2009, 12:25 AM
I am not a f ing noob I have been around these trucks since I was born. '73-76 shells differ in that the panels area is smaller on them than in '77-up

i dont see how you could interchange the panels but its worth a shot i suppose

all different hardware and panels and panel area size













even the regulators '73-76 differ from '77-up because in '77-up the crank shafts are much longer because the door panels are thicker than '73-76

you will see the regulators are different from 73 to the 85

most noobs dont realize or know the 77-up thing

i would just swap entire doors

because not much of anything technically interchanges except the wing vents

roughneck4x4k10
09-18-2009, 02:25 AM
I am not a f ing noob I have been around these trucks since I was born.

if you have been around them since you was born then why the need to ask the question mr. hot shot?

RAM POWER
09-18-2009, 10:47 PM
I wanted to be sure before I pulled them all apart and then got fcked on time.
Also the hinges look completely different.