We're pleased to finally have an area where our current and prospective customers can come to learn about Ballistics latest innovations and news. We plan to use this forum to help open the communication bottlenecks previously encountered and let the consumers know what we're up to.

http://www.ballisticfabrication.com/assets/images/shocks/ShocksBanner.jpg


We would like to kick this off with a giveaway for one pair (2) of Hybrid 2.125" Hybrid AS/CO shocks and coils! These were featured in Extreme 4x4 and have been incredibly popular since their release.

We're going to try something new this time, we have never had any real stipulations in the past, but with tens of thousands on customers running around with our product on their vehicles these days, we figured we would give it a try.


http://www.ballisticfabrication.com/assets/images/shocks/coiloverair1.jpg


GIVEAWAY RULES:

You must post a picture of your vehicle that uses some sort of product obtained from Ballistic Fab. Does it have some shocks? An axle housing or Ballistic Joints? Even a sticker works for us. However, we also want a pic of our parts in use during any state of your build... from opening the box, to fabrication, to final use on the trail.

For those of you that are not previous customers of Ballistic Fab, order a
FREE CATALOG (http://www.ballisticfabrication.com/PREORDER--2009-Parts-Catalog_p_1674.html#) and snap a picture of it when you open the letter.


http://www.ballisticfabrication.com/assets/images/swag/2009-catalog-cover.jpg


EDIT: Drawing has been extended since we were able to ship over 300 more catalogs yesterday. We're adding one week to the date to give people some time to get them posted here!
New drawing held 10/28/09 @ Midnight

Drawing will be held 10/21/09 @ Midnight. Standard giveaway rules apply, red/yellow star is a MUST, no double posting, shocks should not be sold for profit without consulting Ballistic Fab prior to sale.

http://www.ballisticfabrication.com/thumbnail.asp?file=assets/images/shocks/coiloverair2.jpg&maxx=300&maxy=0

In, thanks!

Used your rock rings for the hummer wheels

Hi Jeff, Here is a project that used many of your tabs and brackets!
http://s371.photobucket.com/albums/oo158/tucsontoy/
Thanks for the help.
Roger

Ballistic pinion Guard

http://i162.photobucket.com/albums/t269/bigred05_photo/5569_578213623604_50311517_34098305.jpg

Ballistic 14 disk brackets

http://i162.photobucket.com/albums/t269/bigred05_photo/5569_578419515994_50311517_34103893.jpg

Rockin the Ballistic sticker on the back window :flipoff2:

http://i162.photobucket.com/albums/t269/bigred05_photo/SD530856.jpg


DOM from ballistic

http://i162.photobucket.com/albums/t269/bigred05_photo/IMG_0530.jpg

Dual shear from ballistic

http://i162.photobucket.com/albums/t269/bigred05_photo/IMG_0539.jpg

http://i162.photobucket.com/albums/t269/bigred05_photo/IMG_1330.jpg

http://i162.photobucket.com/albums/t269/bigred05_photo/IMG_1379.jpg

http://i162.photobucket.com/albums/t269/bigred05_photo/beef.jpg

Tabs
http://i162.photobucket.com/albums/t269/bigred05_photo/4808_571561259994_50311517_33818110.jpg

I am a pic whore!!! Thanks for the chance!!

IN thanks for the chance my rigs built completely with your brackets and chromoly rod ends!! 4wheel steer and double triangulated 4 link front and rear with your weld on beadlocks

In thanks Jeff.

Joints and brackets.

http://inlinethumb50.webshots.com/45361/2672346690066781137S600x600Q85.jpg (http://entertainment.webshots.com/photo/2672346690066781137uxoDxF)

Solid races are working out great.

http://i162.photobucket.com/albums/t269/bigred05_photo/4909_570862021274_50311517_33782816.jpg

How badass is it you got your own section! Thanks for the chance to win some badass coilovers that would work awesome on my s10 truggy build

hiems and tube clamp for my highsteer and hydro assist
replacing my craptastic krawler joints with ballistic joints
and pretty much everything on my buddy and I's cj build

Good service and quick turn around, everytime I purchased something. From steering, links, brackets, hiems, tabs and misc.

Thanks guys.

http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v254/108/47/691971836/n691971836_993988_9533.jpg
DIY diff cover

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs256.snc1/10324_142802571836_691971836_3141448_2877537_n.jpg
http://photos-b.ak.fbcdn.net/photos-ak-snc1/v319/108/47/691971836/n691971836_1268953_6814.jpg

DOM, misalignment spacers, and heims for my steering.

Im always rock'n the t-shirt, ill get a pic up of that plus the sticker:smokin:

Oh look 16 ballistic joints and some brackets.
http://i62.photobucket.com/albums/h110/mplong/axles/IMGP0853.jpg

Here are some of the joints on my pvc mock up links.
http://i62.photobucket.com/albums/h110/mplong/axles/IMGP1130.jpg

And here is the rig on its maiden voyage at Flat Nasty
http://i62.photobucket.com/albums/h110/mplong/flat%20nasty%20may%2009/IMGP1200.jpg

http://i62.photobucket.com/albums/h110/mplong/flat%20nasty%20may%2009/IMGP1214.jpg


in thanks for the chance. and a great product

In. I've used QA1 rod ends from you guys. Both front and rear.

http://i5.photobucket.com/albums/y172/JonsYJjeep/4%20link%20project/P1080120.jpg

I originally bought Ballistic Joints to replace the Heim joint on my RE1600 track bar, unfortunately the joint(s) proved to be too large for my application

I am back in school so mod time has dwindled... but I am planning to build a traction bar for the 8.8 I have sitting in the garage using the BF joints

http://img.photobucket.com/albums/v94/jpaddock/Jeep/floor001.jpg

I was showing a few pics to buddies of your beefy product... I think the beef speaks for itself,

3/4x3/4 LH Heim
3/4 LH 2" JJ
3/4 LH 2.63" Ballistic Joint

I've been following a few air shock builds in the XJ section and it's a route I'd love to explore in the future... since there is a possibility for these to be free however.... that is just simply amazing. It's a long shot but this would make an amazing birthday present for myself.... fingers will be crossed on October 3rd, for the 21st draw!

IN!

http://i99.photobucket.com/albums/l315/Ridinspinnas/Projects/DSCF0009-1-1.jpg

And an old school pic

http://i99.photobucket.com/albums/l315/Ridinspinnas/Upper%20Woodpecker%20and%20Upper%20Ajax/IMG_5646.jpg

Heres my POS. Not too many of your parts since I'm 18 and in college, a bit of a budget build lol.

Threaded adapters, poly bushings, jam nuts. And of course the stickers, your one of the few companies that has nice die cut stickers. The red skull will be going on also as soon as I get another one to do both sides.

I also made a group buy of corvette/jeep steering box adapters, I'll post up some pics soon.

http://i140.photobucket.com/albums/r31/myphotoswin/100_0363.jpg

http://i140.photobucket.com/albums/r31/myphotoswin/101_2273.jpg

http://i140.photobucket.com/albums/r31/myphotoswin/100_0198.jpg

Representing ballistic in big gay truck land. I need to paint my wheels still also, looks terrible

http://i140.photobucket.com/albums/r31/myphotoswin/100_0329.jpg

In thanks for the chance. I have used a lot of Ballistics parts, from the joints, rockwell brackets, waiting on my winch plate. easy to order, helpful. Thanks :D

I am saving up for the hybrid's to put on the back of my truggy. I think it would help clean up the look and work a little better than F150 coils.....

As always, thanks for the support and some great products-

http://i656.photobucket.com/albums/uu288/Coma1_/CIMG3306Large.jpg?t=1253587611
getting started

Ballistic skull, steering arms, steering links, and ALL control arm brackets are from you guys as well. Pimp parts!

http://i631.photobucket.com/albums/uu33/zj95maxx2/DSCN0899.jpg



In use
http://i631.photobucket.com/albums/uu33/zj95maxx2/crozet%202009/DSCN1340.jpg
http://i631.photobucket.com/albums/uu33/zj95maxx2/crozet%202009/DSCN1281.jpg

In,I have a bunch of ballistic parts in this beast!

http://i13.photobucket.com/albums/a257/Joel77/frame%20cut/frame14.jpg
Work in progress
http://i13.photobucket.com/albums/a257/Joel77/champy%20ejes/20.jpg
http://i13.photobucket.com/albums/a257/Joel77/link%20explanation/3.jpg

Here are your weld on joints on my old k5 traction bar:
http://i36.photobucket.com/albums/e23/mnorby/Trucks/71%20Blazer/DSC04641.jpg
http://i36.photobucket.com/albums/e23/mnorby/Trucks/71%20Blazer/4-27-08Wheelin555.jpg

your 2.65" joints ont he uppers, 3" joints on the lowers, and using all your brackets to mount my lower links on the axle and the chassis
http://i36.photobucket.com/albums/e23/mnorby/Trucks/97Sonoma/IMG_0086.jpg

I would love to be in but I am still waiting for my parts;) hopefully I can still be in the drawing.

Im in
http://i413.photobucket.com/albums/pp218/Canyonmann/003-2.jpg

http://i413.photobucket.com/albums/pp218/Canyonmann/Craiginafix2.jpg

hope this isnt limited to buggys and crawlers, because I'm using you stuff in my rod builds and my recent D-Max build:smokin:

Whenever I get a box from you guys, it like X-mas:D

In, I'd love a set of those shocks for the front of my rig

Ballistic Joints, brackets, and tubing for tie rods and link arms

http://i64.photobucket.com/albums/h167/bajabomber87/IMG_2800.jpg

Up close

http://i64.photobucket.com/albums/h167/bajabomber87/IMG_2813.jpg

Have to go with a good combination. 3.0 inch joint, tube adapter and a futurama dvd.

To many parts to list came from ballistic fab.

All kinds of Ballistic parts on my Jeep, Nate knows I need those hybrid shocks!
Ballistic bead locks shown here right after they were installed. Some of the very first parts that came off of your laser cutter.
http://i34.photobucket.com/albums/d103/azhayseed/ash_canyon_041-1.jpg
After looking at this picture, it's amazing how much my suspension has changed in the last year! just about none of what you see here is still under there!

Some of my family rig junk:

Rear Disc brackets (Custom from Nate to fit the IH D60 pattern):

http://i53.photobucket.com/albums/g70/BigMookieD/Travelall%202008/DSC02252.jpg

HD Tie Rod and drag link:

http://i53.photobucket.com/albums/g70/BigMookieD/AZIHR%202009/DSC03078.jpg

At a rest with some litter mates:

http://i53.photobucket.com/albums/g70/BigMookieD/AZIHR%202009/DSC03177.jpg

two of my links with ballistic joints and a concept trackbar.
http://i72.photobucket.com/albums/i186/kennylauter909/roastbeefsas/frontaxlesetup005.jpg
http://i72.photobucket.com/albums/i186/kennylauter909/roastbeefsas/frontaxlesetup007.jpg
and a few of my truck;
http://i68.photobucket.com/albums/i38/mike1809/nissan-west-coast-meet-10-08-1022.jpg
http://i68.photobucket.com/albums/i38/mike1809/nissan-west-coast-meet-10-08-1020.jpg
i'll post a few more pics of my upper link with my billet ballistic joint when it comes in the mail.

heres my new upper link with your billet ballistic joint!
http://i68.photobucket.com/albums/i38/mike1809/Mobile%20Uploads/0930091943.jpg

In - thanks for the chance!

Here is a set of your arms - love them!
http://i66.photobucket.com/albums/h250/D3thM3tal/1974%20Bronco/1%20Ton%20Swap/th_DSCI0029.jpg (http://i66.photobucket.com/albums/h250/D3thM3tal/1974%20Bronco/1%20Ton%20Swap/DSCI0029.jpg)

Ballistic + PSC = WIN
http://i66.photobucket.com/albums/h250/D3thM3tal/1974%20Bronco/1%20Ton%20Swap/th_DSCI0071.jpg (http://i66.photobucket.com/albums/h250/D3thM3tal/1974%20Bronco/1%20Ton%20Swap/DSCI0071.jpg)

I also used your offset track bar mount - it's like putting legos together, and then welding them!
http://i66.photobucket.com/albums/h250/D3thM3tal/1974%20Bronco/1%20Ton%20Swap/th_DSCI0080.jpg (http://i66.photobucket.com/albums/h250/D3thM3tal/1974%20Bronco/1%20Ton%20Swap/DSCI0080.jpg)

in thanks!

ive used the 3.0 joints, some misc brackets and poly bushings

Rear link setup with Ballistic brackets and joints, and my rig finished and ready for the trail.

So here are some of the parts that I have. Dana 60 and 14 bolt covers (love the skull). Some tabs for shocks and little mounts. Your Joints for my upper control arms. Tubing Clamps that make tight places wonders for removable brackets.

http://i286.photobucket.com/albums/ll108/ben-shelswell/0728092253a.jpg

http://i286.photobucket.com/albums/ll108/ben-shelswell/One%20ton%20swap/DSCN0097.jpg

http://i286.photobucket.com/albums/ll108/ben-shelswell/One%20ton%20swap/Picture010.jpg

http://i286.photobucket.com/albums/ll108/ben-shelswell/One%20ton%20swap/Picture020.jpg

http://i286.photobucket.com/albums/ll108/ben-shelswell/One%20ton%20swap/DSCN0106.jpg

http://i286.photobucket.com/albums/ll108/ben-shelswell/Picture067.jpg

Tube Clamps!
http://i7.photobucket.com/albums/y262/moverton1284/TJ%20Buggy/SNFabBuggy250.jpg

jeff,

you know my stuff is all over my jeep and everything i build on,

i could REALLY use some new coilovers!!!

you diff cover, knuckle shock tabs, your tabs for the ram on the tie rod and your tie rod ends...
http://img.photobucket.com/albums/v350/rajincajintj/IMG00051-20090825-1933.jpg

your custom made 3.5" flex joint holder...
http://img.photobucket.com/albums/v350/rajincajintj/IMG00060-20090901-1924.jpg

for these ballistic 3" flex joints on my rear 4 link...
http://img.photobucket.com/albums/v350/rajincajintj/abab5ede.jpg

your very first 14b cover and truss
http://img.photobucket.com/albums/v350/rajincajintj/IMAGE_092.jpg

your air shocks on a buddy's rig i built...
http://img.photobucket.com/albums/v350/rajincajintj/IMG_0714.jpg

your stickers on my links
http://img.photobucket.com/albums/v350/rajincajintj/77b3004b.jpg


your 3" bushings on the axle end
http://img.photobucket.com/albums/v350/rajincajintj/4%20link/fc814a4a.jpg


my first ballistic order
http://img.photobucket.com/albums/v350/rajincajintj/IMG_0461.jpg

you got a sticker in there under all that dirt...
http://img.photobucket.com/albums/v350/rajincajintj/hot%20spring%2005%2008/b240c122-1.jpg

oh yeah i am definitely in!
i just ordered your catalog and i will post pics when it arrives, but in case it does not come in on time here is the box of goodies my cousin got yesterday:smokin:

http://farm3.static.flickr.com/2627/3945324920_775db9c624_b.jpg

we are in the middle of a 60-44 swap on his tj and thanks to ballistic, its coming along nicely

thanks for the chance and good luck with the new sub-forum!

:EDIT: Got my catalog today!!! :smoking:
http://farm3.static.flickr.com/2470/3977734184_d82cfe219b_b.jpg
its pretty sweet thanks!!!!

IN!

I've got link brackets, tabs, high steer arms & joints from Ballistic.

http://farm4.static.flickr.com/3406/3273401660_2e17c547ec.jpg

http://farm4.static.flickr.com/3076/3180328567_839db91b12.jpg

http://farm4.static.flickr.com/3343/3585549954_70fd6accf7.jpg

http://farm4.static.flickr.com/3653/3601476847_f76a20b127.jpg

And this is what everything is going on (rear has regular springs and shocks and needs the Ballistic Hybrid AS/CO!):

http://farm4.static.flickr.com/3436/3699065083_18fa8c296c.jpg

In thanks.

Ballistic clamp for Hydro assist cylinder.

http://i85.photobucket.com/albums/k51/hadfield4wd/My%20Jeep/complete005.jpg

Trackbar bracket/tabs

http://i85.photobucket.com/albums/k51/hadfield4wd/My%20Jeep/bracket001.jpg

In....... pic coming soon..................
I have a order # let me know if you need it....:D

Edit- Well crap, I'll snap some pics of teh Scout this weekend.
Thanks for the shot.

Sporting a ton of Ballistic stuff, why not...Could always use more :)

Thanks!

So I know I do not have any pictures of Ballistic gear on my current rig but my senior project is a rock crawler suspension for a YJ I am building. I was going to buy these 2 hybrids for the front and put coils in the rear. I do have a shopping list of Ballistic parts I will be ordering when one or two more pay checks roll in. I have been looking at these things for a LONG time and think they would be perfect for what I am doing.

This raffle could not be anymore perfectly timed for me (minus the need for photos of Ballistic parts) if I could be considered in this drawing it would be greatly appreciated and help make my life just that much easier. Thanks for the time:D

Well I have ballistic fab 60 hi steer arms but I dont have a pic of them installed. As well as the rig was cut up to start a new one. I can get you a pic of your sticker on my toolbox or a picture of the hi steer arms on a bare housing.

in thanks and here are my joints waiting to be installed on my front 3 link.
http://i300.photobucket.com/albums/nn18/vbtj/100_0876.jpg
http://i300.photobucket.com/albums/nn18/vbtj/100_0877.jpg

I'm in.

Lots or orders, DOM, brackets and gussets... Oddly enough, only a few pics:(

future suspension parts
http://www.kurtandnichole.com/gallery2/d/9649-1/IMG_0122.jpg
DOM for 4runner lower links
http://www.kurtandnichole.com/gallery2/d/7362-4/IMG_3271.JPG

Reserved for when I get home & take a pic of your catalog. I've got a wish list a mile long, just waiting on funds to order from ya'll.
The axle they need to go on:

Sweet giveaway.

We just put a set of these on a customers truck, 16"ers in a toyota with a 3-link and a v8. Used 2.63s on the links.

Just got another order in for our personal trucks, 2.63s for my buddies truck, along with diff covers and my 3.0 weldons, and 1.25" heims with missalignment spacers for my steering. Never dissapointed with the quality.

One question though, I've thought about these for my K5Ton, but what is the weight restrictions for these?? It's a big bitch.
These are some of the parts for my bits......

Thanks for the chance buddy:D

http://i60.photobucket.com/albums/h28/s_p_i_d_r/k5/787.jpg


I'll post a pic of the chassis later:smokin:

A bunch of these...
http://i95.photobucket.com/albums/l153/myke52081/TJ%20Build/SSPX0127.jpg

Went into this...
http://www.therideracing.com/images/events/GroundHogCompetition61309/dsc_0491.jpg

Thanks for the chance :smokin:

Parts for a few builds.
http://i197.photobucket.com/albums/aa63/Frontier2k1/Don%20Pathfinder/DSC01476.jpg

Bushings, brakets, joints tube adapters etc from my girlfriend's Xterra.
http://i197.photobucket.com/albums/aa63/Frontier2k1/2003%20Xterra/DSC01486.jpg

Ballistic covers front and rear. Tabs and brackets in various locations too.

http://i579.photobucket.com/albums/ss239/bjallen25/Hoopty/utf-8BSU1HMDAxNDItMjAwOTA0MjItMTkxM.jpg

And a good action shot of the rear cover installed.
http://i60.photobucket.com/albums/h39/sommer23chris/Clayton%20July%2009/DSC00530-1.jpg

Thanks for the chance! I am going to be ordering some of your goodies for the new buggy soon.

Ballistic HD joint used in an anti-spring bending shackle design.

http://i225.photobucket.com/albums/dd26/rockbuggyguy/shackle.jpg

In thanks for the chance:smokin:

Here are some assorted pics of your brackets, coil mounts, tabs, joints etc.

Thanks for the top notch service.

In the last pic check out your sticker on the top right corner of my tailgate:grinpimp:

I have a ton of stuff on my project and only getting more as the build goes on. Got all the joints on my links from you on my truck. Not only the joints but brackets, 14 Bolt Truss, spikes, shirts, skulls and the list goes on. Oh and what better gift for my birthday on 10-21 than a brand new set of Hybrid shocks from you guys. Thank you for giving us this chance.

http://i129.photobucket.com/albums/p218/lizard-lips/truggy%20II/Junk001.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/truggy%20II/Junk008.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/truggy%20build/truggy014.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/matts%20yj/yj207.jpg

http://i35.photobucket.com/albums/d193/WhyHikeAU/skeegee4.jpg

Track bar tubing, flex joint and hiem. That was way back in the day:D. Those would be sweet when I link the rear :grinpimp:

damn! in! this would be awesome ... so ridiculously in need of these ...

pics of some BF stuff


http://www.aww-kittah-aww.com/up/files/1345/Jeep%20build/2009_0206Jeep0020.JPG


http://www.aww-kittah-aww.com/up/files/1345/Jeep%20build/2009_0206Jeep0023.JPG


http://www.aww-kittah-aww.com/up/files/1345/Jeep%20build/2009_0206Jeep0030.JPG


http://www.aww-kittah-aww.com/up/files/1345/Jeep%20build/2009_0206Jeep0031.JPG


from my build here: http://pirate4x4.com/forum/showthread.php?t=756176

Ballasitic axle brackets modified to build a the long arm x-member. Lower c/a are using ballastic joints/tube adapters. Plans changed from radius to 3 link. Pics of my most recent package, parts for the 3 link upper link conversion- Ballastic joints/tube adapters/brackets. (don't have a pick of the 3 link yet, still working on it). Also used the Ballastic Housing Ends to convert a FF D60 to SF. Had to open them up a little to slip over the 60 tubes, but like the slip over design vs others on the market that butt weld to the tubes.

http://offcamber4wd.org/forum/index.php?action=dlattach;topic=6740.0;attach=7928 ;image
http://offcamber4wd.org/forum/index.php?action=dlattach;topic=6740.0;attach=8539 ;image
http://offcamber4wd.org/forum/index.php?action=dlattach;topic=6740.0;attach=8401 ;image

14 bolt diff cover.
and flex from a 4 link built with all ballistic stuff.

I'm in for the chance. Here some pics of your guys parts. Great service by the way.

http://i129.photobucket.com/albums/p218/lizard-lips/Matts%20XJ/xj009.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/Matts%20XJ/yj141.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/matts%20yj/yj312.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/matts%20yj/rear007.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/matts%20yj/yj161.jpg
this is actually my jeep brother also posted it
http://i129.photobucket.com/albums/p218/lizard-lips/matts%20yj/yj207.jpg
http://i129.photobucket.com/albums/p218/lizard-lips/matts%20yj/yj331.jpg

all with ballistic parts. Almost done finally

All my Hiems joints came from ballistic Fab :)

http://pirate4x4.com/forum/attachment.php?attachmentid=465359&stc=1&d=1252613739

My front end build-up would have to start over with the addition of those AS/CO but I would be smilling the whole time as I am doing it. :grinpimp:

So far I am only running Ballistic tube adapters for my control arms and steering, but more will be added, as I get further into it.

http://i196.photobucket.com/albums/aa223/peccavi18/My%20build%2008/005-9.jpg

http://i196.photobucket.com/albums/aa223/peccavi18/My%20build%2008/007-10.jpg

Thanks for the chance.

first setup, extended stock radius arms using Ballistic joints and frame brackets....

New set up will be 3-link, again, with ballistic joints and forged bushings, and combination axle mounts.

New parts fresh out the box...

http://i158.photobucket.com/albums/t105/wshepard20/78%20bronco/0929091211-00.jpg

http://i158.photobucket.com/albums/t105/wshepard20/78%20bronco/0827092219-00.jpg

http://i158.photobucket.com/albums/t105/wshepard20/78%20bronco/0608091811-03.jpg

http://i158.photobucket.com/albums/t105/wshepard20/CIMG6194.jpg

I will also be linking the rear with all ballistic joints and bushings.

Still under construction for the moment... In please..

I'm for sure!

I've been wanting to re-do the front suspension setup!

Ballistic:
Skull on the front diff cover
1 3/4" Small - Med - Long tube tabs
Poly bushing set (used for spreader bar)
Sticker on the dash :flipoff2:
17" DIY Beadlocks
LCA axle brackets

I know there's more!!

In thanks for the chance! These would be great for the front of my Comanche!

DIY Dana 44 Cover

http://i119.photobucket.com/albums/o124/vogelj/BalisticCover.jpg

http://i119.photobucket.com/albums/o124/vogelj/5733_1193813847825_1302807736_53907.jpg

Thanks,

well i have so far is some shock tabs from you guys.. just ordered some axle brackets (Order AB-14166) and hopefully some coil overs in the future..
Keep up the good work! And thanks for the shot, would love to rock these!!
http://www.jeepgod.net/graphics/mods/suspension/shocks/P1030672sm.JPG

http://www.jeepgod.net/graphics/mods/suspension/shocks/P1030673sm.JPG

http://www.jeepgod.net/graphics/trips/2009/Hammers%20Jan%2017/IMG_1297sm.jpg

Not the best picture, but I am running your radius arm coil mounts on my rig. I have bought a couple tabs and brackets here and there also! Thanks for the chance!

IN hells yea new stuff for my buggy build. Complete coil spring set-up and links

Oh, i'm in! I've spent FAR too much money with you guys in the past year and couldn't be happier about it.

we'll start with a 14b rear truss / diff cover.

http://bbaxter51.smugmug.com/photos/507645927_kSfS2-M.jpg

how about some link bracket / shock mounts...

http://bbaxter51.smugmug.com/photos/507645720_sgW8Q-M.jpg

some weld on bead locks...

http://bbaxter51.smugmug.com/photos/507645576_HdG3d-M.jpg

countless link brackets, tabs, shock mounts, etc.

http://bbaxter51.smugmug.com/photos/558753935_oNg3X-M.jpg

Hells ya - I'm in

These would really heklp wityh my build up of my new Jeep. In, thanks!

i used your lower coil pads on my new axles.....

thanks for a great product.

Thanks for the chance.
I used some of your Ballistic joints http://www.slicky.net/smilies/cool.gif
http://www.bsfab.net/gallery.php?cmd=midsize&gallery=front_suspension%2F&image=IMG_1905.jpg (http://www.bsfab.net/gallery.php?gallery=front_suspension%2F&page=3)
Billy

ballistic fab/diamond axle front suspension for my current tacoma(which needs coilovers) and pics of the past two builds that were covered in ballistic parts

http://www.zukikrawlers.com/albums/album127/110_2427.sized.jpg

Best pic I can find, but I have side frame brackets, lower link axle brackets and several other parts used in my build

http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs264.snc1/9131_1123834051792_1105340995_30344525_4724045_n.j pg

In thanks for the chance. Rear upper and lower spring /control arm mount, Ballistic diff cover, trackbar mount, a bunch of other brackets. Still building so no trail shots.

Hell yeah, in for the chance.

The only pic of a sticker:D
http://img.photobucket.com/albums/v401/clean_rf/IMG_2537.jpg

Modified diff cover.
http://img.photobucket.com/albums/v401/clean_rf/frontflipoff.jpg

The whole front suspension and steering is built with parts from Ballistic Fab.

just about everything for my axle swap...links, joints/heims,brackets...

thanks Jeff

magazine ordered (and red sticker). thanks for the chance.

This is a build I worked on last summer that involved your 3.0 Ballistic Joints, Heavy duty frame mounts, and also 3/4" Heims with tubing adapters and jam nuts. I have been purchasing parts from you for years for multiple builds, but this is the most recent and the most documented. I did a rebuild of the control arms and installed a new heavy duty long arm suspension system on the front that combined with your joints... flexed like no other!!! Here are a couple pics of the build up of the links and a finished picture testing in Moab for the first trip out, on the Moab Rim trail!
467718467719
467720467721
467722

I would love to receive your new hybrid air shocks/coilovers for my personal build:
http://c4.ac-images.myspacecdn.com/images01/85/l_94dc1512f41929125cbc56a4b577f893.jpg
My '97 Ram 1500, the RamCrawler.. I have been planning to put the hybrid shocks on the front of it ever since they came out, but unfortunately can't afford them... so I will keep my finger crossed on this one!!!! I am currently running 3/4" heims with tube adapters and jam nuts, and 1 1/2" x 1/4" wall DOM that I got from you, that I turned into the tie-rod, drag link, and the panhard bar.
Thanks for the chance Dr. Vic!!
Matt

Have bought various frame brackets, tabs, and rod end parts from you guys over the years.

http://image.fourwheeler.com/f/miscellaneous/wheeling-at-the-washita-atv-mx-jeep-park-and-trails/30362274%20cr1%20re0%20ar1/klouzek.jpg"]http://image.fourwheeler.com/f/miscellaneous/wheeling-at-the-washita-atv-mx-jeep-park-and-trails/30362274%20cr1%20re0%20ar1/klouzek.jpg
http://hphotos-snc1.fbcdn.net/hs128.snc1/5491_1204741754232_1099279968_30639177_8209911_n.j pg

I'm in! Those would be perfect for linking this.

http://www.pirate4x4.com/forum/attachment.php?attachmentid=461580&d=1250784294

I bought a bunch of stuff from Ballistic during my buildup.

The most recent stuff being coilover springs, shock tabs, rod ends, jam nuts, mis-alignment spacers, tube adapters, tube flanges, and DOM tubing.

Jeff and gang, thanks! Definitely in! saving thsi space and will post up pics of what I have from Ballistic. More planned to go in the new ubber top supper ultra must kilel ya if I tell you project ;)

used you brackets/parts for my rear 4-link
http://i143.photobucket.com/albums/r137/snowshoebrue/niagra/026.jpg
http://i143.photobucket.com/albums/r137/snowshoebrue/501.jpg
http://i143.photobucket.com/albums/r137/snowshoebrue/60swap423.jpg

In thanks.:D
This
http://i187.photobucket.com/albums/x221/evanmurray_photo/truck2.jpg
Getting these
http://i187.photobucket.com/albums/x221/evanmurray_photo/DSC01368.jpg
With 16 of these.:D 3" with 1.5 shank.
http://i187.photobucket.com/albums/x221/evanmurray_photo/DSC01831.jpg

Ballistic steering kit
http://i262.photobucket.com/albums/ii94/d_wilson38685/101_0634.jpg
http://i262.photobucket.com/albums/ii94/d_wilson38685/101_0635.jpg

showing off the new setup:grinpimp:
http://i639.photobucket.com/albums/uu120/smithshoal/Labor%20Day%202009/IMG_1129.jpg

Thanks for the chance..........

im still in the gathering stage...

http://i47.photobucket.com/albums/f161/ioman2/jeep%20build/025.jpg
http://i47.photobucket.com/albums/f161/ioman2/jeep%20build/032.jpg

My Ballistic Fab custom cut beadlocks!

out of the box
http://i211.photobucket.com/albums/bb175/kcflannery/100_9128.jpg

welded up
http://i211.photobucket.com/albums/bb175/kcflannery/100_9127.jpg

painted and rubber mounted
http://i211.photobucket.com/albums/bb175/kcflannery/100_9388.jpg

Slade Ky July 2009
http://i211.photobucket.com/albums/bb175/kcflannery/IMG_6156.jpg

After gettin a bit dirty!
http://i211.photobucket.com/albums/bb175/kcflannery/Haspin%20May%2009/100_9715.jpg

Awsome, I'll be getting joints and brackets for the 1-ton build, and hopefully the coilovers!

:D

I did the link job with your parts. Thanks:smokin:

pic 1-Lower link bracket


pic 2-Frame side upper link bracket and 14b disc brackets


pic 3-Making it work

Thanks for the chance! I'll be back for more when I link the front.

Mounting tabs (all over) rod ends and high mis-alignment spacers for my anti-wrap bar.

in the middle of my build still but i've got your d60 steering arms and tierod/draglink kit. this is the only picture i have but you can kinda see it

thanks for the chance...if i win ill change my build from leafs to links

My entry form is below...

Thanks

http://c4.ac-images.myspacecdn.com/images02/11/l_5aaf512d4d554de0b2b8eadcc04d8cef.jpg

Heim joint jam nuts and some weld in inserts for 2" square lower links.


http://i374.photobucket.com/albums/oo185/rockranger4x4/Hammers/028.jpg

I didn't do any build pics but here's your diff covers, steering arms and tabs in action.

I have many tabs and brackets but you can see the tube end plugs and the shock reservoir brackets in the pics. I would redo the rear suspension and do the coil-overs in place of the 1/4 ellip. springs. Count me in. Thanks for the chance

http://i85.photobucket.com/albums/k41/jeepetos/jacks%20pics/P7260368.jpg
http://i85.photobucket.com/albums/k41/jeepetos/jacks%20pics/tranfercase038.jpg
http://i85.photobucket.com/albums/k41/jeepetos/jacks%20pics/P7050340.jpg

dom and rod ends custom cross over

Awesome giveaway.

I used several Ballistic fab parts on my truck. From brackets and tabs to a high steer arm and full steering kit on my SAS.

http://i104.photobucket.com/albums/m193/bogof777/My%20truck/101_0341.jpg

http://i104.photobucket.com/albums/m193/bogof777/My%20truck/0822091341a.jpg

Those shocks would really come in handy to link the rear.
Congrats on getting your own forum.

I have a few of your parts. My pan hard runs your large poly bushing. Ballistic resivoir clamps on my shocks. All my heims I upgrade get replaced with your heims and more.:smokin:



http://i35.photobucket.com/albums/d186/poorboy3/jasons%20truck/joint.jpg


http://i35.photobucket.com/albums/d186/poorboy3/jasons%20truck/flx3.jpg

http://i35.photobucket.com/albums/d186/poorboy3/jasons%20truck/shkm.jpg

Oh yeah, I could use some more Ballistic Fab bling-bling :grinpimp:

So far all I have ia Ballistic Fab Highsteer (arms, DOM, and threaded inserts) and H2 Beadlocks. It the future I hope to be sportin' Ballistic Fab joints when I get around to building 4 links front and rear.

468246

468247

468248

468249

468250

Here is just one order of products

http://i161.photobucket.com/albums/t229/Junkman67/Stretch%20front/DSC03723.jpg?t=1253996256

and the rig

http://www.lockitupoffroad.net/CIMG0217.JPG

Thanks for the chance!!!!

Heres my current project which I ordered a ton of stuff for but haven't had time to put on.
http://i703.photobucket.com/albums/ww34/crawla38/DSC00107.jpg
Here are some parts waiting to go on.
http://i703.photobucket.com/albums/ww34/crawla38/ballisticzone.jpg

Here you go. I am in the build process and decided to go with your product and I am glad I did. Great quility!

http://www.thefunpatrol.com/zenphoto/albums/RockCrawling/Toyota/IMGP0139.JPG
http://www.thefunpatrol.com/zenphoto/albums/RockCrawling/Toyota/IMGP0138.JPG
http://www.thefunpatrol.com/zenphoto/albums/RockCrawling/Toyota/IMGP0137.JPG

Well, here is my entry!

This is almost done with welding all the brackets onto my Dana 30 HP that went into my 2000 Cherokee. (thanks to mh4runner for doing the nice welds and use of his shop!)

http://imageleft.com/images/image484.jpg

I seriously haven't even finished the Jeep, and took it to Big Dogs Offroad in Gore, VA this past weekend, and here is the Cherokee flexing on the RTI ramp there.

http://imageleft.com/images/picture001.jpg
That's the only picture I could find of it from the whole weekend, aside from being on the trailer, but everyone spent more time wheeling than brushing up on their photography skills. As you can see, the bumper is unpainted, and it still needs a few more cuts and some finishing touches.

The coilovers would be really nice for when I link the rear of it and drop some bigger axles in, probably sometime this winter, depends how far my funds can go for axles and links...

I do have to admit, the bracket kit I bought was a bit frustrating to set up, but none-the-less, I am very happy with the end result. It received a few battle scars over the weekend, but nothing is bent or anything.

EDIT: For clarification, the bracket kit is the Ballistic parts on my rig. It will soon sport a sticker too! Thanks guys!

Damn, yall didn't have a trac bar bracket that I needed, had to order elsewhere :(

Great way to get the new forum started -I have no pic's -But nice Job- Jess

In:grinpimp:

Rig...


http://www.yunit.net/gallery/albums/uploads/eric3link50.JPG


in action

http://photos.imageevent.com/rocktoy94/9132009rc/websize/Sept%2013%202009%20005.jpg

under the knife


http://www.yunit.net/gallery/albums/uploads/eric3link37.JPG

Here's my entry. All my suspension components are from Ballistic - all the link mounts, heims, Ballistic Joints, tube adapters, DOM, rear diff-cover/truss, etc. Here are a couple pics of some of the products I'm running.


http://wheelingarizona.com/forums/files/thumbs/t_p7100036_179.jpg (http://wheelingarizona.com/forums/files/p7100036_179.jpg)

http://wheelingarizona.com/forums/files/thumbs/t_p9110038_143.jpg (http://wheelingarizona.com/forums/files/p9110038_143.jpg)

Thank you.

Ballistic fab 14B cover...

http://i85.photobucket.com/albums/k62/mattyj074/070-2.jpg

Look close..... steering QA1 rod ends are from BF.

http://i85.photobucket.com/albums/k62/mattyj074/066.jpg

Thanks for the chance.
:D

Heres just a taste of the stuff I bought from you!

Thanks for always having amazing products, great customer service, and lighning fast shipping!

http://i147.photobucket.com/albums/r285/willyp87/robs%20jeep/photo.jpg

http://i147.photobucket.com/albums/r285/willyp87/robs%20jeep/IMG_0153.jpg

http://i147.photobucket.com/albums/r285/willyp87/robs%20jeep/IMG_0188.jpg

Not yet done

http://i147.photobucket.com/albums/r285/willyp87/robs%20jeep/IMG_0180.jpg

but im in

well here we go

http://i106.photobucket.com/albums/m272/f250rollinon37s/cuttires029.jpg

everything from high steer arms, tube adapters, heims, spacers, inserts - and more on the way :grinpimp:

and one just for pirate, the must have poser driveway shot :flipoff2:

http://i106.photobucket.com/albums/m272/f250rollinon37s/newboystruck136.jpg

http://i54.photobucket.com/albums/g103/Adamovol/Photo0099.jpg

http://i54.photobucket.com/albums/g103/Adamovol/Photo0023.jpg

14" air/coilovers, your 300# coils and your 400# coils. Ready for the set for the rear. :D

These would fully rock. Count me in.

Some of the many ballistic parts....
http://www.texasag02.com/stretch/stretch17.jpg

3 link tower and CO tabs from you guys and some new joints for the winter build!

a few of the ballistic parts I am running

Used one of your hiems for my lower track bar end.:D
http://img.photobucket.com/albums/v483/StarboardM/Front44/00412.jpg

Finished product
http://img.photobucket.com/albums/v483/StarboardM/Front44/005.jpg

Currently building my 4Runner. I am doing leafs in the front and a 4 link in the back. If I win these I guess im gonna have to by more joints and link the front. That would be awesome!!!

In thanks!


forged ballistic joints with ballistic square tube adapters
http://www.leded.com/zukbuild09/May7/May7_02.jpg

ballistic link mounts
http://www.leded.com/zukbuild09/May7/May7_08.jpg

rig
http://www.leded.com/zukbuild09/July22/July22_02.JPG

in use
http://www.leded.com/Takeover09/images/Takeover09_11.jpg

sloooow progress:

http://i244.photobucket.com/albums/gg23/phillyzj/buggy/buggy001.jpg
http://i244.photobucket.com/albums/gg23/phillyzj/buggy/jeep012.jpg

in, thanks!

http://i165.photobucket.com/albums/u72/soylent_green_machine/Project%20Purple/IMG_2122.jpg
http://i165.photobucket.com/albums/u72/soylent_green_machine/Project%20Purple/IMG_2170.jpg
http://i165.photobucket.com/albums/u72/soylent_green_machine/Project%20Purple/IMG_2215.jpg
http://i165.photobucket.com/albums/u72/soylent_green_machine/Project%20Purple/IMG_2218.jpg
http://i165.photobucket.com/albums/u72/soylent_green_machine/Project%20Purple/IMG_2228.jpg

My Sonoma is being built with all Ballistic Fab ends....joints, heims, TRE's, and hardware....by a good friend of mine, James (complete build thread will be up soon....). All the parts I've gotten - and I will be getting more - have been purchased through Alex, BF's east coast distributor. I couldn't be happier with how it's coming together with y'alls parts.:D

http://i466.photobucket.com/albums/rr27/JVFabrication/Long%20Haul/DSCN0617.jpg

SWEET giveaway and thanks for the chance!!!

http://i123.photobucket.com/albums/o314/hoop20/DSCF0223.jpg

Here are the new rockwell spring perches i just purchased during your labor day sale:
http://i173.photobucket.com/albums/w69/vantheman44/rockwell1.jpg

http://i173.photobucket.com/albums/w69/vantheman44/rockwell3.jpg

Here is a pic of them getting mocked up nd ready to install:
http://i173.photobucket.com/albums/w69/vantheman44/renohomes021.jpg

Here are some tube adapters i bought a while back when i was building my draglink for my truck
http://i173.photobucket.com/albums/w69/vantheman44/carpics107306.jpg

http://i173.photobucket.com/albums/w69/vantheman44/carpics107438.jpg

http://i173.photobucket.com/albums/w69/vantheman44/carpics107434.jpg

I'm trying to get the rockwells ready to go under the k5 and then i can throw the dana 60 and 14 bolt from the k5 under my 4runner and a set of your shocks would go perfect for that build. Thanks for the chance.

not as bling as some bigger rigs but its built in my driveway and gets beat to death :flipoff2:
http://c4.ac-images.myspacecdn.com/images02/35/l_b4ea42be59834a10a536c722c8194b77.jpg
http://c3.ac-images.myspacecdn.com/images02/11/l_bdd56dde7ce046aea28526d3752ed97a.jpg

Basically the whole front-end is ballistic parts save for the coils and trackbar, lower brackets links, joints, and all the axle bracketry on the front 44
http://i34.photobucket.com/albums/d144/rcdoug/DSCF1502.jpg
http://i34.photobucket.com/albums/d144/rcdoug/DSCF1503.jpg
http://i34.photobucket.com/albums/d144/rcdoug/DSCF1500.jpg
http://i34.photobucket.com/albums/d144/rcdoug/DSCF1504.jpg

I used a bunch of your brackets for my Double-Cab Taco 3-link build
http://img111.imageshack.us/img111/5503/img00017xm1.jpg
And here's a picture of it walkin the wall at Niagra Rim Trail
http://img337.imageshack.us/img337/3383/dsc0150rm8.jpg

This year in the Black Hills at this years DTC. Running Ballistic Joints on the front Suspension.
http://i59.photobucket.com/albums/g312/crzyxj/sidesplitter.jpg

Here are all the parts I have been purchasing for the 4-Link.
Ballistic adj. frame mounts, Adj. 4-link mounting system,14B Truss, Ballistic weld on poly bushings, 2 Ballistic joints, Still need 2 more:grinpimp:. Getting ready to install it as soon as I can get some Coilovers.

http://i59.photobucket.com/albums/g312/crzyxj/4linkparts-1.jpg

Thanks for the chance!!

In, thanks for the chance. I have your hi-steer arms and 7/8" steering kit on my 60.

No One can beat this pic! Teach Em young

http://i7.photobucket.com/albums/y275/chicousaf/Picture748.jpg

I want to do a coil over swap on my wifes Sport trac to get rid of the F'ing Torsion bars, to smoth the ride out and i think if i won these it would be pretty kick ass start.

Sweet! These would help jump start the re-build. I used a pair of coil spring mounts on my rear 60 build.

http://i50.photobucket.com/albums/f303/OtisPics/60%20Rear/LinkSpringMounts.jpg

http://i50.photobucket.com/albums/f303/OtisPics/60%20Rear/album_pic.jpg

In, Thanks:

Pics from my build I JUST finished. Custom hybrid Ford radius arms with Ballistic Joints

http://www.marylandcreepers.com/attachment.php?attachmentid=15&d=1241700168

http://www.marylandcreepers.com/attachment.php?attachmentid=25&d=1241700380

Ballstic joints, jam nuts, link brackets and coil buckets.

would love to get rid of the stock tj coils:D

thanks for the chance

IN, thanks for the chance! Steeker and catalog just showed up, I'll have to order some parts soon!
http://i12.photobucket.com/albums/a230/skullver/work%20stuff/IMG_2124.jpg

Just got all my brackets for rear 4 link, could definitely use the shocks!

http://i16.photobucket.com/albums/b6/willhf1011/DSCN1350.jpg

Rockin the shirt at Crozet this past weekend.

http://i445.photobucket.com/albums/qq173/georgiarocks7/Crozet-%20October%2024%202009/PA240189.jpg
http://i445.photobucket.com/albums/qq173/georgiarocks7/Crozet-%20October%2024%202009/PA240196.jpg

not on the trail yet but my brackets and joints are from B-fab. I'm a very happy customer... my build thread is in my sig. Those shocks sure would be nice to finish off linking the rear instead of the 63s I'm running now. Here's some photos:

http://img.photobucket.com/albums/v146/eeshnab/bracket.jpg

http://img.photobucket.com/albums/v146/eeshnab/IMG00120-20090513-1451.jpg

http://img.photobucket.com/albums/v146/eeshnab/IMG00115-20090513-1403.jpg

http://img.photobucket.com/albums/v146/eeshnab/anothersideshot42s.jpg

http://img.photobucket.com/albums/v146/eeshnab/DSC02214.jpg

http://img.photobucket.com/albums/v146/eeshnab/DSC02204.jpg

http://img.photobucket.com/albums/v146/eeshnab/DSC02095.jpg

Here is a ton of 1 ton stuff..... Also am talking with a supplier about ordering some rockwell stuff.... None of the one ton stuff is installed because I havent made that far, and now have switched to rockwells...

in please

http://pirate4x4.com/forum/attachment.php?attachmentid=470548&stc=1&d=1254859723

http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs022.snc1/2341_602816139588_12701760_37768751_268080_n.jpg

This has your 3/4 steering kit, bumps, a few tabs, and a couple of weld on skulls. Have a set of your heims, spacers, jams, and adapters sitting around for linking it one day, these shocks would be perfect.

http://i61.photobucket.com/albums/h51/79_elcamino_ss/a33-2.jpg



This has your flex joints/jams/spacers/adapters, diff covers, disc brackets and a few small misc parts on it.


http://i61.photobucket.com/albums/h51/79_elcamino_ss/b4.jpg


http://i61.photobucket.com/albums/h51/79_elcamino_ss/a18-2.jpg

IN, thanks.....I could really use some coilovers for the rock racing season coming up.

i used your brackets for my 3 link, and tube inserts for the panhard. and i have your hi-steer arms. all and all impressed with your product.

http://i146.photobucket.com/albums/r249/Grason88/IMG_0855.jpg
http://i146.photobucket.com/albums/r249/Grason88/IMG_0898.jpg

and in action...
http://i146.photobucket.com/albums/r249/Grason88/IMG_1020.jpg

Purchased Heims, nuts, DOM, mis. spacers, shock tabs

http://mystomper.com/bbs_images/IMG_0673.jpg

YouTube - jeep cj7 starting 401 (http://www.youtube.com/watch?v=LBPZKYzyeZg)

My 3 link rear, joints, brackets, tabs, truss, cover, etc...

http://i268.photobucket.com/albums/jj30/zabeard/backhalf3link/DSCF3146.jpg

http://i268.photobucket.com/albums/jj30/zabeard/backhalf3link/DSCF3145.jpg

Rig...

http://i268.photobucket.com/albums/jj30/zabeard/Attica%2009/IMG_1723.jpg

http://i7.photobucket.com/albums/y259/lopezio1/Badlands%202009/100_0521.jpg

IN! This would be the perfect item so I could finally link my rear! :D

Slim pickings on pics, but here is one ballistic flex joint I used on my traction bar:

http://i41.photobucket.com/albums/e288/intrepidyota/4Runner%20minor%20repairs/P2130008Medium.jpg


Crappy pic, but rockin the ballistic sticker out back:

http://i41.photobucket.com/albums/e288/intrepidyota/4Runner%20minor%20repairs/creepy2.jpg

I use the HD balistic joints all over my lift. Where there is a joint it's by Ballistic. :smokin:



http://img34.imageshack.us/img34/2824/31860232.jpg (http://img34.imageshack.us/i/31860232.jpg/)

http://img34.imageshack.us/img34/6462/35373934.jpg
By jmdaltx (http://profile.imageshack.us/user/jmdaltx), shot with Canon PowerShot A610 (http://profile.imageshack.us/camerabuy.php?model=Canon+PowerShot+A610&make=Canon) at 2009-10-06

Ive been ordering Ballistic fab parts for my axles swaps in the ZJ,

Just the 8.8 parts
http://img.photobucket.com/albums/v172/masterlugi/DSC01983.jpg
http://img.photobucket.com/albums/v172/masterlugi/DSC01990.jpg

Wheeling,
http://i44.photobucket.com/albums/f6/ClemsonOffroad/Fox%20Ridge/foxridge022.jpg

minivan wheeling...
http://img.photobucket.com/albums/v172/masterlugi/wreck2.jpg

Will be using ballistic fab parts for everything with my new build that hopefully will be kicking off in the next week, just having to plan my budget with starting college this year. buying another ZJ from my insurance check and continuing the build. Will gladly throw some coilovers on it :smokin:

Bought a bunch of tabs and brackets for this build but this is the only pic I could find with visual product..... Shocks would go to linking the front end this winter... Thanks for the chance. Awsome give a way.

470613

In, thanks for the chance. I've got Ballistic joints on my 1/4 ellept. 4- link setup and could sure use some coilovers:smokin:

I've got your midwestern heims, and some modified brackets, I really need some c/o's up front:grinpimp:

Would also be a sweet wedding present oct. 17

http://i24.photobucket.com/albums/c6/FALCONS693/truck1-1.jpg

http://i24.photobucket.com/albums/c6/FALCONS693/truck1-2.jpg

http://i24.photobucket.com/albums/c6/FALCONS693/truck-2.jpg

Ok, its not a 4x4 but I love the Ballistic parts. Some day I'll have another Toyota FJ40. Had one in the 80's. But for now all I have to put ballistic parts into is a car :) Im getting ready to get on the ballistic site right now to take advantage of the 10% sale. JR

Some of their QA1 rod ends, some tube, tube ends for my watts link.
http://img.photobucket.com/albums/v366/Jrouche/Steves%20Nova/Rear%20rebuild/Watts%20link/b.jpg

http://img.photobucket.com/albums/v366/Jrouche/Steves%20Nova/Rear%20rebuild/Watts%20link/s.jpg

http://img.photobucket.com/albums/v366/Jrouche/Steves%20Nova/Rear%20rebuild/Watts%20link/x.jpg

http://img.photobucket.com/albums/v366/Jrouche/Steves%20Nova/Rear%20rebuild/Final%20pics/c.jpg

http://img.photobucket.com/albums/v366/Jrouche/Steves%20Nova/Rear%20rebuild/Final%20pics/h.jpg

Here is my rig:

http://www.vandelladventure.com/mottino.jpg

I have been buying a bunch of Ballistic fab parts. Many of them are waiting to be used. Here are some that will end up as part of a sector shaft brace.
I also bought a steering kit that needs to be fabbed up and some ballistic joints that will end up as a custom skid to protect the drive shaft. I dont have pictures of these parts though. Thanks for the giveaway!

I just ordered everything for a four link from joints to brackets today.:smokin:

Will post a pic as soon as they arrive. edit: arrived today 10/21

http://i34.photobucket.com/albums/d132/yellorover/P1020458.jpg

http://i34.photobucket.com/albums/d132/yellorover/06%20LJ/IMG_0146.jpg

Have Ballistic tube adapters for the steering and links. Just bought some brackets a few weeks ago but wont work in the current configuration. Saving them for another project.


http://i43.photobucket.com/albums/e356/cpsavinski/SAC/PC200249.jpg

http://i43.photobucket.com/albums/e356/cpsavinski/Takeover%2009/Picture031.jpg

Just got my battery box, not badass but useful.

http://i583.photobucket.com/albums/ss273/KRT-09/Mobile%20Uploads/IMG00174-20091007-1720.jpg

Diff cover, truss and spring/control arm/shock mounts

http://i586.photobucket.com/albums/ss310/jdavismmi/Jeep%20build/100_0638.jpg

Thanks

The UPS man stopped at my place today and delivered my coil buckets and shock mounts. Somehow I thought they were sold as singles so I ordered two, now I have an extra set of coil buckets. I guess that is all the more reason to 4 link the rear a little sooner than planned.:D

I just want to say that the quality blew me away, these are sick. I can't wait for my next order to be delivered, I am counting the days.

http://i233.photobucket.com/albums/ee18/kureusgeorge/Photo294.jpg

http://i233.photobucket.com/albums/ee18/kureusgeorge/Photo284-1.jpg

There are some joints on here as well.

http://i233.photobucket.com/albums/ee18/kureusgeorge/mail.jpg

In. Tube end caps.

http://farm3.static.flickr.com/2598/3984213404_93484ea61e.jpg

Upgrading my homemade hot rolled link tabs to some quality ballistic pieces.
Thanks for the chance, Jake

one of two ballistic joints that Im going to be using to build my upper link for my 3 link.

http://img.photobucket.com/albums/v69/redranger4.0/DSC_0161.jpg

The rig its going on

http://img.photobucket.com/albums/v69/redranger4.0/P1010245.jpg

Coil spring mounts, link tabs, threaded tube adapters, etc.

Clayton Ok

http://inlinethumb52.webshots.com/42803/2813661820037705841S600x600Q85.jpg (http://good-times.webshots.com/photo/2813661820037705841KiltxP)

Count me in and thanks for the chance!! Sweet give-a-way:smokin: Just got these in the mail and will be installing them soon!! Set of 14 bolt disc brackets, lower coil spring brackets and some coilover mounts. I also have a ballistic battery box as well.
http://i154.photobucket.com/albums/s252/jenks07/new%20jeep%20project/001-6.jpg

And i still need more stuff

http://i184.photobucket.com/albums/x134/chevyrcks/Picture324.jpg

got my ballistics stuff in the mail today
a set of high steer arms
a 7/8 steering kit and a set of shock mounts
and the last pic is of the heep under construction:p

still waiting for my free catalog!you would think living in az it would show pretty quick but then again this is the third time trying to get one in two years.hope it shows in time for the contest.you guys do make some nice products

All Ballistic brackets, tabs and joints in this project we called Tetnus.....it was a rust bucket..

http://i60.photobucket.com/albums/h39/sommer23chris/Mad%20Max%20CJ5/pic002.jpg

http://i60.photobucket.com/albums/h39/sommer23chris/Mad%20Max%20CJ5/IMG00104-20090322-1524.jpg

http://i60.photobucket.com/albums/h39/sommer23chris/IMG00014-20090919-1147.jpg

Here's a few of the parts I bought from Ballistic for the jeep build. Got my Reid Racing knuckles, all the tie rod ends, and some high-steer arms that I didn't use.

http://i202.photobucket.com/albums/aa256/johnrv4/P1010525.jpg


Here's a picture enjoying the finished product

http://i202.photobucket.com/albums/aa256/johnrv4/DSC01057.jpg

Count me in. I used your joints and brackets to link the rear last year and just earlier this week I got a box full of goodies to link the front. Those shocks would go perfect on the front. Thanks for the chance.

http://i606.photobucket.com/albums/tt148/digg854/IMG_1545.jpg

I have the ballistic joint, with a couple rubber bushings for my track bar, as well as the DIY Heim steering kit and a couple other random brackets and tabs.

http://inlinethumb10.webshots.com/39881/2443747570091349939S600x600Q85.jpg

http://www.pirate4x4.com/forum/attachment.php?attachmentid=430522&stc=1&d=1237769770

http://inlinethumb38.webshots.com/40741/2729003940091349939S600x600Q85.jpg

Thanks for the chance!

I don't have a pic on this PC, but I am using your upper link bracket on my rig :)

In.

I.D. tube clamps on it.:D:D

Its time for a three link front.:smokin::smokin:

im in this is great! QA1 joints

http://i204.photobucket.com/albums/bb5/twoslo4five0/001-43.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/parts%20for%20sale/fab%20pics/041-1.jpg

Would be nice.

Flex joints on all 4 corners.

Poser pic is stock, Jeep is still on jackstands

Im In and thanks for the chance. I have joints and tube adapters.:D

Thanks for the chance!:smokin:

Ballistic DOM sleeves w/ poly bushings



http://i267.photobucket.com/albums/ii297/mudtoy67/DSCN2409.jpg

http://i267.photobucket.com/albums/ii297/mudtoy67/DSCN2433.jpg

http://i267.photobucket.com/albums/ii297/mudtoy67/DSC00150.jpg

OOOOHHHH MAANNNNN !!!! these would complete the package!!!:grinpimp:

I got 8 / 2.63 Forged Joints, 8 / 2.63 Poly Bushings, rebuild tool, L/R hand threaded inserts, jam nuts, an assortment of brackets, and a "BAD ASS" CAMPGRILL !!!!:D

Thanks for the chance and a great product !!!!! :smokin:

Edited to add pics.

The brown thing is going under the red thing using your joints and radius arm/coil spring brackets...maybe even radius arm/coil over brackets.:smokin:

I run some of your stuff. Rod ends, link material, upper link mounts, tube end caps, and hopfully soon some coil overs.

http://img223.imageshack.us/img223/8/img0006zq1.jpg

Pics. from a couple of weeks ago.
http://img193.imageshack.us/img193/7782/10526124449263361512683.jpg

http://img193.imageshack.us/img193/6351/10526124449239360912683.jpg

Count me in! I bought 8 Ballistic joints (3", 1.5" shank) to redo and beef up my front 4-link. If I like them, which I'm pretty sure, I'll do the rear too.

http://i363.photobucket.com/albums/oo76/Xtremgirl/100_1270.jpg

My trail rig

http://i363.photobucket.com/albums/oo76/Xtremgirl/100_0768.jpg

http://i363.photobucket.com/albums/oo76/Xtremgirl/GetAttachment-1.jpg

http://i363.photobucket.com/albums/oo76/Xtremgirl/GetAttachment.jpg

http://i681.photobucket.com/albums/vv176/aboriginal-lee/Show%20n%20shine%20LTQ/IMG_2858.jpg

http://i363.photobucket.com/albums/oo76/Xtremgirl/100_1057.jpg

YouTube - Pat Extreme Top Québec 2009 (http://www.youtube.com/watch?v=h6c9AwELqBE)

count me in also... All Ballistic FAB link brackets also running a sticker on my back window :D

http://i564.photobucket.com/albums/ss88/PimpedoutTOY/DSCF3374.jpg

http://i564.photobucket.com/albums/ss88/PimpedoutTOY/DSCF3414.jpg

sweet thanks guys

sign me up!I really could use a pair to replace my leaf springs already have most parts except coilovers and hiems to do 4link.they would help a poor desert dweller greatly!heres a pic of my ride with your catalog thanks for putting this together

crappy pic of front brackets, shock mount, ballistic joints, heims....

I cant post pics on my work computer but here is a link to my truck.

NO ITS NOT FOR SALE ANYMORE........ MY WIFE WONT LET ME SALE IT.

http://www.pirate4x4.com/forum/showthread.php?t=805528&highlight=



Thanks for the great products and AWSOME customer scervice. Keep up the great work.

I cant post pics on my work computer but here is a link to my truck.

NO ITS NOT FOR SALE ANYMORE........ MY WIFE WONT LET ME SALE IT.

http://www.pirate4x4.com/forum/showthread.php?t=805528&highlight=



Thanks for the great products and AWSOME customer scervice. Keep up the great work.

Well dont you have a cool Wife! :flipoff: lol

here some histeer arms i bought!

Dana 70 diff cover with truss bracket for my cj7 once I finish collecting parts for the tons swap. Thanks again for the awesome product and catalog.
http://i436.photobucket.com/albums/qq86/willturner_01/1020091849-00.jpg

Awsome give-a-way, thanks for the chance. IN

Edit: UPS showed up :D

I used all Ballistic stuff for My Tie Rod, Draglink, and panhard. All tubing, hiems and flex joints. :grinpimp:

http://i35.photobucket.com/albums/d193/WhyHikeAU/RG3MMORV2.jpg


http://i35.photobucket.com/albums/d193/WhyHikeAU/RG3MMORV.jpg

Hell yeah, Thanks!! I know theres Ballistic parts on here:

What a great thread with all the build pics. Here is what I have of Ballistic products, all brackets, link-coil-shock mounts, shock mounts, all link ends. Thanks Ballistic.
http://www.pirate4x4.com/forum/picture.php?albumid=596&pictureid=5255
http://www.pirate4x4.com/forum/picture.php?albumid=642&pictureid=5641
http://www.pirate4x4.com/forum/picture.php?albumid=642&pictureid=5640
http://www.pirate4x4.com/forum/picture.php?albumid=642&pictureid=5639
http://www.pirate4x4.com/forum/picture.php?albumid=642&pictureid=5638
http://www.pirate4x4.com/forum/picture.php?albumid=642&pictureid=5637

just got my order
thanks!

Second ONLY in production rear diff cover for the C200 on the Nissan Xterra!

How she came
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/BFcoverraw.jpg

Painted and ready for install
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/BFpaintedcover.jpg

On the X
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/PA202812.jpg
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/PA202804.jpg

http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/PA202802.jpg

I could use these for my 4runner! You can bet I'll be sportin' some metal parts soon too.

Second ONLY in production rear diff cover for the C200 on the Nissan Xterra!

How she came
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/BFcoverraw.jpg

Painted and ready for install
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/BFpaintedcover.jpg

On the X
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/PA202812.jpg
http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/PA202804.jpg

http://i621.photobucket.com/albums/tt293/IZVERG/Rear%20Suspension/PA202802.jpg

I could use these for my 4runner! You can bet I'll be sportin' some metal parts soon too.

:shaking:

work in progress. box full of joints 4 link to come(still need shocks)

Whats are you shaking your head for?

Whats are you shaking your head for?

My bad........ didnt see they extended the Giveaway... good luck

:shaking:Has this happened to any one else?
I got a pair of hs arms from ballistic several months ago, I have been so busy at work that I'm just now getting to rebuild this axle. After installing them last night, I noticed that the 10degree camber correction is backwards on them, I just hope they make this right

somewhere theres a ballistic fab diff cover back there....:smokin:
http://inlinethumb63.webshots.com/44862/2065898050101593207S600x600Q85.jpg

:shaking:Has this happened to any one else?
I got a pair of hs arms from ballistic several months ago, I have been so busy at work that I'm just now getting to rebuild this axle. After installing them last night, I noticed that the 10degree camber correction is backwards on them, I just hope they make this right

sounds like you have the drivers on the passenger side and the passenger side on the drivers.

I use your high steer arm on my dana 60........ :grinpimp:

:shaking:Has this happened to any one else?
I got a pair of hs arms from ballistic several months ago, I have been so busy at work that I'm just now getting to rebuild this axle. After installing them last night, I noticed that the 10degree camber correction is backwards on them, I just hope they make this right

:flipoff::flipoff: Wrong thread :flipoff::flipoff:
:mad3:

Got the first kingpin spring elliminator in the country sold by Ballistic fab along with a steering arm and various tabs, rod ends and tubing connectors to complete my crossover steering....Im in.

I was wondering when the winner of the contest would be announced??

Heres your brackets tacked in..... now I just shocks..............:D
http://i570.photobucket.com/albums/ss144/msawin42/Jeep%20Build/3linkfront.jpg
http://i570.photobucket.com/albums/ss144/msawin42/Jeep%20Build/3linkfront3.jpg

Count me in after the last second. maybe you didnt notice I'm posting late:D

Coils much needed in my quest to 3link and slip a 1UZ into this thing- the somewhat stock runner that is. Some ballistic tabs and bushings on the extracab already.

Parts are accumulating. help a bud out

has yhe winner been announced yet???

Winner is Otis, post # 131

congrats!

Jeff

YES!!!!! I'll give you guys a call next week. Thanks Ballistic!

-Jon

Congrats Otis - nice score !!

Winna!!
congrats.