|
mrdrinksalil 09-24-2009, 11:13 AM Has anyone done this? I can't seem to find one and am thinking about it. Low as possible, maybe 4" uptravel stuffing 37's or 35's. Also, for those who have done it, what do you have to look out for when you cut out the inner fender structures front and rear? Major loss of chassis strength? JayH 09-24-2009, 04:40 PM I've done it Build HERE (http://pirate4x4.com/forum/showthread.php?p=8908522#15) and on a 95 with 4" up travel and stuffing 37's, but you probably don't want to be as drastic with the cutting as I did :p http://pirate4x4.com/forum/picture.php?albumid=219&pictureid=5401 mrdrinksalil 09-25-2009, 07:11 AM Dont mind shock hoops into the cab or under the hood but this ones still pretty and wanna keep the body together for now. alwaysxj 09-25-2009, 09:46 AM that is not a zj that is a pile of tubes. looks good though:flipoff2: JayH 09-25-2009, 03:25 PM There is very little tube there, really, no internal cage - only the c-pillar and a few support pieces. It's still mostly a '95 ZJ Orvis edition, well by shear number of parts anyway... I think. :grinpimp: mphudak 09-25-2009, 04:22 PM What are you building now? What happen to the Truggy? Dirt-Fab 09-25-2009, 08:28 PM It is not a ZJ, but I did this on an XJ a couple months ago. http://www.pirate4x4.com/forum/showthread.php?t=809719&highlight= mrdrinksalil 09-30-2009, 06:16 AM What are you building now? What happen to the Truggy? I've still got the truggy. Just finishing up full hydro on it right now. The Zj was my old daily driver a friend is gonna build cause I bought a tow rig/daily driver. As for me I've got axles, tire, wheels, drivetrain waiting on a pile of tube and the grass to stop growing for the new one. :grinpimp: | |