|
jsawduste 09-28-2009, 07:12 PM Hi Jeff, on the D60 truss. You say it is indexable with the diff cover for pinion angle. How do you do this ? Assuming it will fit an HP60 made into a rear. How is inventory ? Thanks !! Ballistic Eng 09-28-2009, 07:48 PM Are you referring to the Ford HP Front Dana 60 Truss or the standard Dana 60 rear truss? jsawduste 09-28-2009, 08:14 PM Are you referring to the Ford HP Front Dana 60 Truss or the standard Dana 60 rear truss? You got me. Did not realize you made two different trusses. :homer: Taking a late model BJ HP60 and retubing it into a rear axle for my YJ. So I am thinking the dana 60 REAR truss is what I want. But will it work with a HP60 housing ? Thanks !! Ballistic Eng 09-28-2009, 09:45 PM Yes, it has ample clearance between the top of the housing and the bottom of the truss for your application. You can clock it to w/e position you want, but you might have to modify the piece that bolts from the truss ring to the truss itself if you want to clock it in a position other than than the one it was designed to fit. It would be a very simple modification if needed. jsawduste 09-29-2009, 02:03 AM Thanks for the info. !! VTcivil 03-07-2011, 03:12 PM Guys, I'm looking for the "FORD Front Dana 60 Truss" delivered to 22153. I'm ready to purchase and figured I would start here to see if there is a Pirate / Ballistic Zone discount. Let me know. http://www.ballisticfabrication.com/FORD-Front-Dana-60-Truss_p_1671.html Ballistic Eng 03-07-2011, 03:20 PM Guys, I'm looking for the "FORD Front Dana 60 Truss" delivered to 22153. I'm ready to purchase and figured I would start here to see if there is a Pirate / Ballistic Zone discount. Let me know. http://www.ballisticfabrication.com/FORD-Front-Dana-60-Truss_p_1671.html 10% discount for using "Pirate" as the discount code when checking out online. Thanks VTcivil 03-07-2011, 03:32 PM do you guys have any fabricator peices for working a PSC ram mount off of this truss? I was going to just make something on my own but figured I'd ask. Ballistic Eng 03-07-2011, 04:13 PM do you guys have any fabricator peices for working a PSC ram mount off of this truss? I was going to just make something on my own but figured I'd ask. Not yet BallisticDave 03-08-2011, 11:29 PM FYI - We have lots of these in stock right now! Grab em while they're hot! MNorby 03-13-2011, 07:49 PM any chance of a GM 60 truss yet? Ballistic Eng 03-14-2011, 12:34 PM any chance of a GM 60 truss yet? Not yet. | |