cherokeecrawler
10-04-2009, 09:25 PM
Has anyone put this setup on there zuk with toyota axles if so can i get some help and maybe some pics.
|
BCzuk 10-04-2009, 09:40 PM Do some searching around here, it has been done lots. HumZukie 10-04-2009, 09:57 PM Ya, it can be done, people do it, here it is. http://i49.photobucket.com/albums/f261/rellim87/Samurai/IMG_0297.jpg http://i49.photobucket.com/albums/f261/rellim87/Samurai/IMG_0298.jpg Find your desired mounting location, plate and sleeve the frame, bolt on. cherokeecrawler 10-05-2009, 04:50 AM thanks for the help what drop pitman arm would i need if i just run stock yjs sprung over and toyota axles. just the one that comes with the ifs high steer kit? HumZukie 10-05-2009, 06:47 AM Im just using the MC pitman arm that came with my hi-steer. Have no interference problems at all. cherokeecrawler 10-05-2009, 08:25 AM cool thanks man PpaZmrf 10-05-2009, 10:15 AM If you are running Yota high steer, and you havent streatched the frame in front you are going to run into problems with your draglink crossing up with your tie rod because your front shackle mount wont let you push the box far enough forward. Also, since you are running YJ's and they are inherently flat, you might also want to run a flat pitman arm to decrease the risk of your spring coming into contact with it. I run an FJ80 box (very similar but with reverse rotation) with a flat pitman arm. HTH. Kevin cherokeecrawler 10-05-2009, 06:04 PM why did you have to tell me that dude haha what do i need to do then. PpaZmrf 10-05-2009, 07:55 PM If you cant push it forward, run an FJ60 or 80 box (they are a bit stronger also). The pitman arm swings forward so you can place it where you want. I've seen guys run the IFS box with the pitman/draglink crisscrossed up and that is not correct...or stretch your frame and make room. Just my opinion. Good luck. Kevin HumZukie 10-05-2009, 11:01 PM I was running sky's M/L YJ kit, but when it came time to put in my Toyota PS box...it done wouldn't fit. Had the stretch the frame out and re-do the front body mounts. Well worth it in the end. JCC 10-06-2009, 07:15 AM Where did you get the flat pitman arm? My spring is pretty close to factory FJ arm. JC PpaZmrf 10-06-2009, 06:26 PM Where did you get the flat pitman arm? My spring is pretty close to factory FJ arm. JC Trail Gear. The IFS arm will fit the FJ boxes no problem. JCC 10-06-2009, 07:16 PM Thanks, JC One Sick Puppy 07-17-2010, 09:38 AM Can someone post a pic of their IFS pump to 1.3 engine bracket? | |
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.