So its a 87 samurai jk bone stock for now. im gong to put toys f&r 5.29s and detroits. 37s or bigger not sure yet on springs. it has a carb 1.3 stock. im goin to put 4.5 or 6.5 in the t-case just not sure. its going to be a slow build for sure, but they are very cheap to build. im done building Toyota i still like them just tried of building em

http://i258.photobucket.com/albums/hh271/thegoofster21/Picture001.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/Picture002.jpg

did the spring over on it
http://i258.photobucket.com/albums/hh271/thegoofster21/f.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/a.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/nana.jpg

got some 31s on it and flexed out with my bddy old truck and the ladies
http://i258.photobucket.com/albums/hh271/thegoofster21/IMG_7075.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/IMG_7077.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/IMG_7078.jpg

and now in the middle of doing work on the motor. just cleaning it up, rear main seal was leaking really bad , needs a new radiator and new clutch. and got a trialer
http://i258.photobucket.com/albums/hh271/thegoofster21/1005091557a.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/1005091556.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/1005091556a.jpg
http://i258.photobucket.com/albums/hh271/thegoofster21/Picture004.jpg

ill take the one on the left.

ill take the one on the left.

haha good luck :laughing:

haha thanks. ill just show up in my sami she'll be stoked.:mr-t:

haha thanks. ill just show up in my sami she'll be stoked.:mr-t:

well the one on the left in the sun glasses likes toyota's thats her bf and the one the left is mine is likes the sammi's but i put a ring on finger so ha :flipoff2:

touche salesmen. get that thing on yotas and hammer down.:beer:

touche salesmen. get that thing on yotas and hammer down.:beer:

do you know lilbuddy?

sure do. i know a couple of the guys up here. im from foresthill so most of my wheelin buddies are in auburn area.

sure do. i know a couple of the guys up here. im from foresthill so most of my wheelin buddies are in auburn area.

ya i go wheelin with them guys from time to time

yota axles someday

don't go over like a 33 untill you get the yotas... The sami axles will do fine on 33's and smaller unless you get too crazy on them. A good preformance piece for the engine and still CARB legal, is the thorely header. One of the nicest things you can do for your 1.3L engine.

A taller upper shock mount and longer shocks will give you some more droop... You do realize that your trailer is for hauling jeeps don't you? :shaking:

don't go over like a 33 untill you get the yotas... The sami axles will do fine on 33's and smaller unless you get too crazy on them. A good preformance piece for the engine and still CARB legal, is the thorely header. One of the nicest things you can do for your 1.3L engine.

A taller upper shock mount and longer shocks will give you some more droop... You do realize that your trailer is for hauling jeeps don't you? :shaking:

oh for sure the trailer would work really good for jeep but im going to make it work for the sammi. :D my father inlaw is the reason i have a sammi, i like his a wanted to build one, his is on 33s with 5.9 in the tcase rears up front.
http://i258.photobucket.com/albums/hh271/thegoofster21/mypicscell2009072.jpg

just a thought a have a chevy pass drop 44 68" from wms to wms if cut it down to 61" and did a tacoma rear. do you guys think it would worth my time and money or should i just go with toyota front?

sweet lookin' sami. just a little advice, find some YJ's springs and use them instead of the stock sami springs. i have built two already and one of them ran on stock springs for three years as a DD. we brought it in the shop and installed 2.5" YJ's, toy axles and running 37" iroks, as a DD. the other one we built last month for a girl we wheel with. used stock YJ's, stock sami axles and running 33" boggers as a DD. it is amazing the differents between the two springs. not only in street performanc as a daily driver but off road the flex is unbelieveable. just my two cents.

once again, sweet sami and a good start on her.

I like d44's however I appear to be in the minority if your gonna cut it down take it all off the drivers side and you can use an early bronco long side shaft talk to offroad designs about the shaft length they were very helpful when I called and make sure you order a shaft that will take the same size ujoint as your chevy does early broncos ran a smaller joint in the knuckle

I like d44's however I appear to be in the minority if your gonna cut it down take it all off the drivers side and you can use an early bronco long side shaft talk to offroad designs about the shaft length they were very helpful when I called and make sure you order a shaft that will take the same size ujoint as your chevy does early broncos ran a smaller joint in the knuckle
ok thinks man ill look in to that

sweet lookin' sami. just a little advice, find some YJ's springs and use them instead of the stock sami springs. i have built two already and one of them ran on stock springs for three years as a DD. we brought it in the shop and installed 2.5" YJ's, toy axles and running 37" iroks, as a DD. the other one we built last month for a girl we wheel with. used stock YJ's, stock sami axles and running 33" boggers as a DD. it is amazing the differents between the two springs. not only in street performanc as a daily driver but off road the flex is unbelieveable. just my two cents.

once again, sweet sami and a good start on her.

ive heard a lot about yj spring. they seem to work really good.lucky for me i have an 04 tacoma i drive as a DD so the sammi is more of just a wheeler. whats your wheel base with the 37s

thanks travis