So as you guys may have saw from pics the PO of my vehicle put all new Johnny jointed lower control arms in the rear of my Disco. He left the rotoflex on it though. He supplied me with the parts to change it to a RR Classic drive shaft and the new flange to attach it. I removed the drive shaft from my Disco and went to remove the old flange and I am a bit stumped. I have some ideas but figure I would ask before I waste my time and destroy parts. How do I get the rotoflex flange off of the diff?

The centering peg is threaded 8 * 1.25. Put your hub nut socket over the three bolt flange, pass an 8 m/m bolt through the socket with a heavy washer to stop the bolt. hit the bolt with an impact and the centering peg will pop out.

Sounds easy enough. Thank you.