Who sells them? Where can I get some?

YOUR JUNK IS NEVER GANNA BE RUNNING..........:laughing: :laughing: :flipoff2: :flipoff2:

that's it fawker, as soon as i can drive over under my own power i'm parking on you hood :flipoff2:
It needs to be done by the 19th (clean up) will be maiden voyage.
why not come over and help a brotha out :evil:
As soon as i get the rims it's going to Johns house for electrical.
We actually got it fired up today. Sounded good...

YOUR GOING TO CLEANUP:confused:

ILL BELIEVE IT WHEN I SEE IT...:D
WHAT ELSE DO YA NEED TO DO????

brakes-
DL's-
hummer rims-
little odds and ends...

I got mine through Kascar (864)422-0370. I believe their url is real4wd.com, but not sure as I am on stiniking dialup on the road and don't have access to all my links on this PC.

HTH

MCMaster -Carr sells them. They are buna-n.

I don't remember the PN, but seriously, if you search, it's out there. Off the top of my head, they are type "457-A" or some such shit. They cost about $7 for two.

Use the search ya damn newbie! :flipoff2: :flipoff2:

mcmaster-carr has them for $7.60 for a 2 pack, part # 9452K451, it's a 14" ID, 14.5" OD and 1/4" diameter

http://www.mcmaster.com/

Put the 9452K451 number in the search box and it will come right up. I got mine in 3 days. :D

Originally posted by Daniel
DO those work for the 12 bolt too?

Did you send mine out yet?

The radial rims have a smaller cross section and a larger diameter O-ring.

You can use the bias ply O-rings by stretching them over something slightly larger than the seal area for a day or so. You have a higher likelyhood of Oring leakage because they sort of roll over the sharp edge on the rim and get a small cut in them. Out of the 8 I tried this way I got 2 leakers.

Kascar wants $20 EACH for the bias ply and $22 EACH for the radial O-rings.

"hummer o-rings?" Don't you get those from girls?




ooooh, the other "hummer o-rings"...dirty me