for those of you who are running toy axles, what are you doin for traction bars to prevent axle wrap? cuz my stock axles are gettin thrown up in the air with stock gearing...what do i do for the toys?
thanks
-justin

Do a search, I just posted a couple pics of mine (in a seatbelt thread) which was based off of Roktoy's. A link to his site can be found in the Toy section here. (http://www.pirate4x4.com/forum/showthread.php?s=&threadid=77070&highlight=traction+bar)

awww, no way...thanks a bunch chris for pointing that out; it helped a whole lot and i learned a whole lot more...this sent me in a very good direction.
one question though... should the shackle be pointing strait up (90*) or should that shackle be just a hair bit aft the front of the vehicle for using reverse and not binding/breaking stuff?
-justin

Originally posted by izooki13
awww, no way...thanks a bunch chris for pointing that out; it helped a whole lot and i learned a whole lot more...this sent me in a very good direction.
one question though... should the shackle be pointing strait up (90*) or should that shackle be just a hair bit aft the front of the vehicle for using reverse and not binding/breaking stuff?
-justin

The shackle should be set so it is perpendicular to the ladder bar (90 deg angle).

Originally posted by Azrckcrawler


The shackle should be set so it is perpendicular to the ladder bar (90 deg angle).

does it matter if it's pointing up or down too much? I know this has been rehashed many times, but thought I'd just see if anyone has a nice pat answer.