|
: Rock Crusher Dana 60 w/ Detroit Locker axle removal GCALLY 10-12-2009, 07:58 PM I need some help! How do you remove the axle shaft in a rock crusher Dana 60 with a Detroit locker? I already have all the end bolts off on the bearing side of the axle shaft. I suspect that there is some kind of c-clips but I cannot see any in the locker. The Rockslut 10-12-2009, 08:08 PM Front or rear axle? If rear, SF or FF? If its a rear you probably have a bent housing. GCALLY 10-12-2009, 08:19 PM Front or rear axle? If rear, SF or FF? If its a rear you probably have a bent housing. SF Rear axle. I doubt that the tubes are bent they are 3" dia 1/2" wall. The Rockslut 10-12-2009, 10:41 PM If you have taken the 4 nuts off the bearing retainer and you cant get the shaft out with a good pop from a hammer then there are alignment issues. | |