Normal retail price is $199.95, plus shipping---and these are heavy!! Right now just $199 WITH DELIVERY INCLUDED TO YOUR DOOR.(In the 48 continental states)


The AtoZ Fabrication Do-It-Yourself weld-in bead lock kit allows you to create bead lock wheels from any standard steel wheel by simply welding a ring to the outer lip of your wheel and then bolting on the clamping outer ring. Not designed for reverse-center wheels.

Our 15" beadlock kits have 32 .375" (3/8") mounting holes for each wheel. All kits are designed for Nylock nuts and 2" long high-grade bolts. All of our beadlock kits are of the "within the lip" design for easy fitment and solid welding, and must be welded by a competent welder.

The Steel rings are CNC cut and machined from .25" (1/4") thick high-grade steel. This kit contains rings for four (4) complete wheels--four weld-in inner rings and four bolt-on outer rings. When lowing your air pressure to gain better performance off road, often the result is a tire coming off of the rim when it's least expected or needed. These bead lock kits are designed to allow you to weld the rings to your steel wheel of choice. The rings will arrive boxed and ready to weld in. You will also gain approximately 3/4" width to each wheel for better stability.

Consult your state laws for DOT regulations.


http://www.atozfabrication.com/store/images/D/S1031714.jpg

8-22-11: I saw you havent recieved input on the DIY beadlocks.Well I would like to say they turned out awsome.I used an old axle and a vice to spin the wheel while welding.Very precise fit and well balanced at 75 mph.(Not recommended by you of course).On the trail they have taken some hits that would have bent the wheel without the added strength.... thank you... J Balls in North Idaho

Thanks, Jesse!

Slightly off topic but can ya get me a price on a set of 16" weld ons picked up at RC on Nov 7th?

Slightly off topic but can ya get me a price on a set of 16" weld ons picked up at RC on Nov 7th?

The 16" units are on sale for $184.95, but I can do a set for $170. I thought I was going to race on the 7th, but found out it was my daughter's birthday party... I can run up there Friday night if that works for you, or maybe Saturday early. Give me a call and we can work it out.
Thanks.

The 16" units are on sale for $184.95, but I can do a set for $170. I thought I was going to race on the 7th, but found out it was my daughter's birthday party... I can run up there Friday night if that works for you, or maybe Saturday early. Give me a call and we can work it out.
Thanks.

Ok Ill be in touch. thanks.

-j-rOd

Three sets left in current stock. Thanks for the orders!!

New batch coming in on Tuesday. This special is still available on this new load. Order now.

Apparently, this is the lowest price in the country because we are selling a slew of them at this price. Call to get you set.

do these also come w/ the hardware?

do these also come w/ the hardware?

Not for the $199, but we do have a hardware option. Let me know what you need when ordering and we can get everything together for you.
Thanks.

Still going on.
Thanks.

Price on a set of 4 in the 16.5" shipped to 37921

set of 4 16.5" with and w/o hardware shipped to 27614 thanks

PM responses sent.
Thanks!

New batch coming in Friday--already half sold. Call now to get in line at these prices.

quote for a set of 17" without hardware.

Normal retail price is $199.95, plus shipping---and these are heavy!! Right now just $199 WITH DELIVERY INCLUDED TO YOUR DOOR.(In the 48 continental states)





Call direct to order--only four sets left at this price!

http://www.atozfabrication.com/store/images/D/S1031714.jpg

Thats my Junk...

Been a couple years now of beating on them and the bead locks still perform great!

http://i66.photobucket.com/albums/h264/jgallant13/swanzey/DSCF0511.jpg
http://img44.imageshack.us/img44/3203/johnatmabell.jpg
http://i4.photobucket.com/albums/y145/xwrangler04/045-1.jpg

Gotta watch those trees. ;)

price for a set of 17s without hardware to 45833

PRICE SENT TO 44067

15 " diy basic beadlock for 5 rims

PRICE SENT TO 44067

15 " diy basic beadlock for 5 rims

I could do that for just $235 with the Pirate discount. Call to order or use PBB10 during website checkout.

Thanks!

quote for a set of 4 with hardware 97322

quote for a set of 4 with hardware 97322

Our hardware kits are kind of expensive at $99.95, but that is Fastenal yellow cadmium. If you have access to a Tractor Supply I think you can get it for around $60--I just don't have one close enough to be able to run to.

Anyway, with our hardware you would be looking at $299.90 with delivery to your door. If that works for you please call me direct to order.
Thanks!

Come and get 'em. New batch available for build season!

Set of 4 15in shipped to 06801 please....

Set of 5 15" to 23456. Thanks!

I have a set of five 16" and need a set of five 15"... willing to do a trade?

I have a set of five 16" and need a set of five 15"... willing to do a trade?

If you bought them through AtoZ Fab we can discuss it, but if they are another manufacturers I would not be able to trade.

set of 4 - 15" shipped to 40218 business.

set of 4 - 15" shipped to 40218 business.

The sale price is $199.95 with delivery inside of the 48 states if you call to order.

Order placed. thanks.

price on 4x15s with hardware to 66502 thanks keaton

price on 4x15s with hardware to 66502 thanks keaton

$294.95.

Set of 4 16" shipped to 95948

price on 17" shipped to 44270

Thanks

in stock and ready to ship.

Are these steel wheels set up like your aluminum wheel that has the ring machined to rest on the wheel? Any pictures?

Whats the weight of this wheel?
What's the weight of the aluminum wheel?

Are these steel wheels set up like your aluminum wheel that has the ring machined to rest on the wheel? Any pictures?

Whats the weight of this wheel?
What's the weight of the aluminum wheel?

Mark, this thread is for standard DIY steel beadlock kits (http://atozfabrication.com/store/product.php?productid=16169&cat=262&page=1) that you can weld into your existing steel wheels.
http://www.atozfabrication.com/store/images/D/welding002.jpg

D'oh! :homer:

hey zach do these have a machined area or knurling where the tire bead is squeezed?
quote for a set of 5 16" shipped to 03244...... thanks

Set of 17" to 50322.

Set of 17" to 50322.

$219.95 to yo do. :D

Price on 4 15"ers and hardware shipped to 98329, Thanks

BTT--another new batch just hit the racks.

16/16.5"---just $225 delivered
17" ---just $245 delivered.

5 15" to 95111?

ComNgetEm while they're fresh.

BTT for Wednesday

Could I get a price on 16" qty4 shipped to 21060....Thanks

Rick

Come get ya' some!

Price for a set of (5) 15" w/o hardware shipped to 94550.

Thanks,

Price for a set of (5) 15" w/o hardware shipped to 94550.

Thanks,

Check your PM box.
Thanks!

Btt.

Wednesday bump.

Thanks for the orders!

Bump for Monday.

You still offering the 15" shipped for $199??

I would like to know if you are still offering this too? If so, how much to add a 5th set for my spare? Thanks.

I would like to know if you are still offering this too? If so, how much to add a 5th set for my spare? Thanks.

Yes, we are still doing this offer. The 5th ring set would add just $41.25. Please call to order as we do not have the special set up on the website.
Thanks!

Diy ftw!

Are these kits designed to used on road?

Are these kits designed to used on road?

There is no DOT number, if that is what you are looking for, and we have them listed as "off-highway use only" because of it. With that said, we have tons of guys running them on the street. If you trust your welding it is your call.

you may have posted this somewhere, but how much for rings for 1 15" wheel. I need to do my spare. I bought a kit of 4 from you already. Thanks

you may have posted this somewhere, but how much for rings for 1 15" wheel. I need to do my spare. I bought a kit of 4 from you already. Thanks

I can do one for $41.25, but the shipping would be stupid just due to size. To Kentucky it would likely be ~$20. Give me a call and I will see what I can do.
Thanks!

(find a buddy who needs four and I can just put the extra set for you in for no extra shipping. ;) )

set of 4 15" with hardware to 48082. business if it makes a difference.

Buy now for your holiday week fab parties. Keep warm by the nice glow of the welder. :smokin:

New batch in-bound tomorrow. Call to get dibs on yours now before they are ghost.

Another batch of the 15" units has been sent to the machine shop, but we still have some 15" and 17" units that can ship the same day!

From Wikipedia, the free encyclopedia

A beadlock or bead lock is a mechanical device that secures the bead of a tire to the wheel of a vehicle. Tires and wheels are designed so that, when the tire is inflated, the tire pressure pushes the bead of the tire against the inside of the wheel rim so that the tire stays on the wheel and the two rotate together. In situations where tire pressure is insufficient to hold the bead of the tire in place, a beadlock is needed.

There are several styles of beadlocks. For 4-wheel drive vehicles, a ring with a number of bolts around the circumference is used to clamp the tire to the wheel.

Fresh units available now.

bttt

Got tax refund???

Whats the deal on two 15" sets shipped to 98405 Thanks Brian

Whats the deal on two 15" sets shipped to 98405 Thanks Brian

They have to ship in two boxes due to weight so it would be $399.90 for two sets. Please call to order as we do not have this special on the website.
Thanks.

Last batch at this price--steel prices have risen more than we can absorb. I can hold the $199.95 shipped price for this final batch only. Call now to order!!

Btt!!

Sunday bump.

set of 4 15inch with hardware to 96161 thanks

price to 60187 on a 15in wheel with hardware.... Thank you.

We love Pirate Members!

Come 'en getum.

We have a few sets left before the new batch comes in. We have awesome pricing on 16" and 17" DIY kits as well.

I saw you havent recieved input on the DIY beadlocks.Well I would like to say they turned out awsome.I used an old axle and a vice to spin the wheel while welding.Very precise fit and well balanced at 75 mph.(Not recommended by you of course).On the trail they have taken some hits that would have bent the wheel without the added strength.... thank you... J Balls in North Idaho

Thanks, Jesse!

4 17s shipped to 29620, thanks

We have a few sets left before the new batch comes in. We have awesome pricing on 16" and 17" DIY kits as well.

Looking for an awesome price on 16's shipped to 36856

Jesse :smokin:

Can you do custom logos/patterns? And can I get a quote for 5 15" to 95662 please?

Can you do custom logos/patterns? And can I get a quote for 5 15" to 95662 please?

We do not have the ability to do custom logos at a reasonable price because we have these cut in large batches and they are not done on a standard plasma table. They are cut on a Whitney multi-process machine so the bolt holes are punched for tight tolerances and no kerf. No other company does this that I know of.

For 5 15" units we can do them for Pirate members for just $249.95 if you reference this thread when you order.

Thanks for the orders!!

BTT for the holiday weekend! Happy Labor Day!

fedex dropped mine off yesterday, great value for a set of diy beadlocs. I post pic when get welded up:beer:

fedex dropped mine off yesterday, great value for a set of diy beadlocs. I post pic when get welded up:beer:

Thanks! Enjoy.

We have the wheels needed for these as well.

got any for 16.5" rims? price shipped to 92532

got any for 16.5" rims? price shipped to 92532

PM sent the other day.
Thanks.

BTW, for other 16.5" wheel owners, there are different sized 16.5" wheel lips. If a ring with a 16.875" OD will fit inside the outer lip of your wheels with a small gap then yes, we do have the size that works for you. Give me a call to order.

Kaboom! Another batch sold, but alas a new batch is coming in Monday. Get 'em while they are fresh.

Hi looking for 4 beadlock wheels 5x5.5 going on a 1978 CJ7. Would like them black if possible. Thanks

Just to clarify, but this thread is about DIY weld-in beadlock RINGS. This is not a complete set of wheels. You will need to provide a set of wheels, clean the paint/powdercoat off, bevel the weld area, and weld them in.

Thanks! ;)

Great deal Zach!

Great deal Zach!

Thanks, Dan. They do seem to be popular. ;)

Free Shipping on all KMC Bead Lock Wheels and Raceline Brand Wheels.
__________________________________________________ ______________

Here it is. The AtoZ Fabrication Jeep Wrangler JK front bumper you have been waiting for! These shorty winch bumpers are made from beefy 3/16" domestic high-grade steel plate and is CNC cut and fully welded on the ends.


FACETED DESIGN GIVES STRENGTH AND GREAT LOOKS TO YOUR FRONT END
WILL FIT MOST BOTTOM-MOUNT WINCHES WITH STANDARD 10X4.5" PATTERN
DIRECT BOLT-ON
INTEGRATED LOWER SKID PLATE
INCLUDES CLEVIS MOUNTS AND HARDWARE
OPTIONAL RADIATOR HOOP AND WINCH GUARD
STARTING FROM JUST $374.95



__________________________________________________ ______________


The Evolution of Champions - TEAM AtoZ Fab takes Class 2 and 3 in the RCRocs Series for 2011.


The Making of Team 222 by Jim “Krawler” Smith


It is hard to believe that it was 5 years ago when Rausch Creek announced that they were going to start their own version of WeRock. My initial thought was that I wanted to be part of it, but I didn’t want to trash my Jeep, nor did I think it was built up enough to compete. So, about a week passes and Jay asked me if I was going to enter, which I quickly declined. He then asked if I would spot for him, if he decided to compete. This was my way to be a part of a team and check out the event. We both decided it would be a good idea to learn the rules and see what this type of competition was all about, by judging at a WeRock event at RC. This was a very useful tool and educational experience. There were times when we couldn’t figure out why they were doing what they were, but then we quickly saw the benefits of their strategies. We also saw attempts that failed and learned from that as well. The event gave us ideas on what we wanted to accomplish as competitors.We went into the first practice session with high hopes of kicking ass, but we were knocked off our mountain with a broken OBA belt and snapped driveshaft. This made us sit back and really think about what is needed to do well in this event. We had to do the opposite of our normal trail riding. Instead of trying to make the most difficult path with no assistance, we needed to pick the easiest way and stack rocks if needed.We carried this information into the one and only event for the 2007 year. I think there were 15 competitors in Class 2 that year and all seemed to be a good bunch of guys. It was a very cold day with snow still on the ground, which made the courses very interesting. Each time we hit the course, we learned something else about our abilities and the Jeeps potential. We ended up going into the shootout with a large enough lead that we didn’t have to run it, but sitting it out was not in our nature. We proceeded to hit the drop off that claimed 3 out of 5 vehicles in front of us and completed it like we have done it many times before. My wife even commented that someone behind her initially said, “why are they going that way, didn’t they see what happened to the other vehicles”, but they quickly followed up with, “well I guess that is why they are in first place”!!!!

It was an awesome competition and we made a bunch of friends that day. Neither of us ever thought that most of them would continue to become better friends over the next 4 years and bring tough competition to each and every event. We thank you all for making this series such a great time.


4 years later, a ton of upgrades to the Jeep and memories of successful and destructive strategies, we are sitting as 4 time RCRocs Class 2 champs. “Rock On Team 222”

Charge up the hot glue gun and burn some of our beadlocks into your steel wheels.

Great price Zach!

Thanks for the orders!!!

Still rolling strong!

Zach is the man, ordered on Tuesday eve, show up on Friday. Quality Product.
http://i60.photobucket.com/albums/h35/wvjeepers/long%20arm%20and%20axle%20swap/f18cce59.jpg