|
: Bashin' front springs...somethin' 2 talk 'bout superzuki 09-24-2002, 10:44 AM I'm running YJ's front and rear and love everything about them except the approach angle. What should I do. Coil or Toy rear spring swap to move my front axle forward. Ideas.......... Jas Anyone wanna post my pics????? Arizona Zuk 09-24-2002, 11:37 AM Originally posted by superzuki I'm running YJ's front and rear and love everything about them except the approach angle. What should I do. Coil or Toy rear spring swap to move my front axle forward. Ideas.......... Jas Anyone wanna post my pics????? I'll post them...email them to me.... let me guess....YJ with Moosing Stink....I mean missing link? Look at AZrockcrawler's setup....he bends the snot out of the rears.....too many fat chicks....LOL Azrckcrawler 09-24-2002, 11:50 AM Originally posted by superzuki I'm running YJ's front and rear and love everything about them except the approach angle. What should I do. Coil or Toy rear spring swap to move my front axle forward. Ideas.......... Jas Anyone wanna post my pics????? Like Dave says, shackle reverse. I put a traction bar in back and got rid of my missing links back there to take care of bending the rear ones. There's a picture of my front end here. (http://www.pirate4x4.com/forum/showthread.php?s=&postid=870062#post870062) superzuki 09-24-2002, 11:56 AM I do have a missing link in the rear but have never bent them. I have a track bar that keeps everything cool in the rear. The front I just trashed my 5th pair of YJ's. I'm thinking of swapping to a set of toyota rear springs since they are the same length but have a 4" off denter locating pen. I couldn't find the pic I thought I had of the front approach angle so I sent some others......... (thanks Arizona Zuk) I'm debating a shackle reversal or coils......... If I can get the approach angle right the leave sure are easier and less upkeep..... Thanks Jas superzuki 09-24-2002, 12:26 PM Arizona Zuk, I sent you pix thanks j Arizona Zuk 09-24-2002, 01:15 PM Originally posted by superzuki Arizona Zuk, I sent you pix thanks j send some with bent springs....show us trouble in River City.... then look at Chris's and loose your ML's.... ROCKILLER 09-24-2002, 01:33 PM I just recently got my front springs figured out. I used a stock set of toy rears and two leaves from 2.5" lift YJ's and its working good. still VERY soft hopefully shocks will help it from flying around everywhere. I was coming from the regular YJ's and the front tire just barely rubs now. much nicer. superzuki 09-25-2002, 05:35 AM Aren't Toyota springs only 2" wide and YJ's 2.5"??? If so- how are you using 2 different width springs in the same pack???? J | |