|
kckustoms101 10-24-2009, 03:34 PM i have been lurking on here for awhile and i have a question i think i understand how a twin stick works one stick is for hi gear and low gear and one stick is for 2wd and 4wd. am i right. now for a triple stick what is the third stick for. knaffie 10-24-2009, 03:45 PM When you have dual transfer cases, the 3rd stick controls the front case lo/hi range Corey Young 10-24-2009, 03:54 PM On a NP205 one stick is for the front axle: Low, Neutral, Hi. The other stick is for the rear axle: Low, Neutral, Hi. The third stick is for the crawl box. kckustoms101 10-24-2009, 03:57 PM ok now what does the crawl box do?? sorry for the questions stjjames 10-24-2009, 04:05 PM It engages your low gear set. This would be the arraignment in a Atlas with an underdrive. This enables you to have 3 low range options - say, 2.7, 3.8 & 10.x - depending on what arraignment of gearing you have selected. stick one = front axle drive, neutral, low stick two = rear axle drive, neutral, low Stick three low kckustoms101 10-24-2009, 04:11 PM thank you are my thoughts on the double stick right | |