maybe this is a dumb question. but how much preload are you supposed to have on the king pin set screw with the springless arms?

Good question. Also torque specs for the arp studs would be handy.

maybe this is a dumb question. but how much preload are you supposed to have on the king pin set screw with the springless arms?

It works out differently on every setup due to wear amounts, but we've found that 25-30 ft/lb seems to work well. You don't want the knuckle to flop back and forth, but you still should be able to move it back and forth by hand.

Hope this helps.

Jeff

kinda what i was thinking thanks. how bout the arp studs?