I picked up an old style dana 60 latley and it is complete except for one locking hub. A new set is 200$ and just a little much after dropping the cake for the 60. The existing is a selectrode with an 8 bolt mounting pattern and the stub is a 30 spline. Yeah I already tried the wanted board, this is going under my 92 club cab 3/4 ton. Bill @ 530-573-8958

sorry dude, your fawked. they haven't made those for along time. i could find the hub your lookin for, but it'll cost you your 60 :flipoff2: i'll see if my freind keven has any laying around.;)

Thanks for checkin that out for me Fullsize. Another option may be to convert it over to internal style hubs( I have a new set of these in the garage) Anyone know if this is possible without changing the spindle?

try postin that question in general 4x4 also. ;)

http://www.winchesplus.com/

I called them a couple of months ago and they quoted me about 130.00 for a pair of Selectros.

Ryan

Thanks for the hookups guys, I'm trying to cross reference the bearing and seals to see if a newer style internal hub will work first. But If I can find an old style selectrode for cheap, thats the best way to go.

They are definately still available. Milemarker makes them. I just got part number 11034-01 for my front Dodge 60. I called Milemarker to make sure they were right. 4WPW can get them for under $150. I only gernaded one after 10 years of abuse. Sorry, but I am keeping the other for a spare. Good Luck,

Thanks for the info guys,I'mgonna order a set of Milemarkers next week.

Standup Guy at winches plus broke up a set of hubs, sold me the one I needed for 62.50, best prices around too.

Originally posted by Wilymeister
Anyone know if this is possible without changing the spindle?

The internal (Chevy) and external (Dodge) bearing hubs use the same spindle . . .

so by changing to a chevy or later dodge style rotor/hub, i can have internal hubs? :confused:

Originally posted by Wilymeister
I picked up an old style dana 60 latley and it is complete except for one locking hub. A new set is 200$ and just a little much after dropping the cake for the 60. The existing is a selectrode with an 8 bolt mounting pattern and the stub is a 30 spline. Yeah I already tried the wanted board, this is going under my 92 club cab 3/4 ton. Bill @ 530-573-8958



I have twoexternal hubs from a dodge d60. One says power train products on it and the other says dualomatic or something like that. Changing to 35 spline outers and drive flanges.

so sell me your hubs. how much?:D

How much they worth to ya? Going out of town this weekend but will be back tuesday. If you want them send me a pm with a price and they are yours. Give me a decent price and i'll throw in the stubs also.

I'm interested in the hubs too.

PM me if Fullsize doesn't get them

Anyone got a closeup pic of one of the selectros?

Originally posted by iscout62
Anyone got a closeup pic of one of the selectros?

i'm swapping a 60 in the front of my daily driver W250,
iv'e got a page going with a couple pics of the "seletro's" on it here........http://www.geocities.com/lorimaryrose/dodgedana61.html

That looks familiar. What part number did you have for the rotors?

:confused: