not really sure what they need them for but i sure want one:D

https://www.fbo.gov/index?s=opportunity&mode=form&id=b332080a26cd6f599163b2fada224717&tab=core&_cview=0&cck=1&au=&ck=

http://www.anzioironworks.com/MAG-FED-20MM-RIFLE.htm

not really sure what they need them for



Because they are fawking pimp, and make a really big hole :grinpimp:

Because they are fawking pimp, and make a really big hole :grinpimp:


they want them for the same reason as i do then:D

oh buddy that would be awesome to shoot. :smokin:

Effective range-5 miles. :eek: My goodness, somebody plans on bringing down some light planes and helicopters and maybe a tank or two.

they heard about a group of gun enthusiasts wanting to buy a town ;)

not really sure what they need them for but i sure want one:D

Did you see this on Snipershide and decide to post it here? :D

I'm guessing the FBI wants to knock down some aircraft or immediately immobilize a semi-tractor.

they heard about a group of gun enthusiasts wanting to buy a town ;)

:laughing: :laughing:

they heard about a group of gun enthusiasts wanting to buy a town ;)

Yeah but only 2 of those at three rounds per reload, they better have some fast hands. :D

Effective range-5 miles. :eek: My goodness, somebody plans on bringing down some light planes and helicopters and maybe a tank or two.

Or some serious sniping feat :eek: !


So the rifle can probably straight-shot, what, 2.5 miles maybe?

Or some serious sniping feat :eek: !


So the rifle can probably straight-shot, what, 2.5 miles maybe?

I don't think you're going to find many people who can make a shot much over 2 miles. I wouldn't know but I would hazard the number at less than 5.

I don't think you're going to find many people who can make a shot much over 2 miles. I wouldn't know but I would hazard the number at less than 5.

True.


Which means a 1-1.5 mile shot would be a piece of cake.

YouTube - Mag-Fed 20MM Rifle with Suppressor (http://www.youtube.com/watch?v=a9NxHj1R04g)

dayyyummmm....

True.


Which means a 1-1.5 mile shot would be a piece of cake.
There are confirmed kills at those ranges in the sandbox. That, to me, is fully awesome.

There are confirmed kills at those ranges in the sandbox. That, to me, is fully awesome.

Roger that.


The Gunny that got me into firearms (Besides my dad) nailed a fellow dink at precisely 2500yds :grinpimp: !

So, anybody know if this 20mm is man-portable?:laughing:

Non firing bolt assembly




:confused:



:edit: is that like a "Shooter" type safety?

they heard about a group of gun enthusiasts wanting to buy a town ;)

oh shit.



:eek:

So, anybody know if this 20mm is man-portable?:laughing:


i could shoot moa at 100 yards offhand with it:flipoff2:

oh shit.



:eek:

Or they are just as excited :)

YouTube - Mag-Fed 20MM Rifle with Suppressor (http://www.youtube.com/watch?v=a9NxHj1R04g)

When I think of 20mm rounds I think of the calibers the Germans and Japs used in their planes against us in WWII.

Sadly, here in Cali, we could only get those with 10 round mags!

Since that would be a DD and has a suppressor- are two NFA forms required for it? Or is it one item per their form?

how is this not a DD

how is this not a DD

It is a DD.

And there's one stamp for the rifle, one for the can. Of course our wise, ethical, and wonderful FBI doesn't need to pay the tax on them.

I wonder if old Lon is going to name these in honor of Vicki Weaver.

Effective range-5 miles. :eek: My goodness, somebody plans on bringing down some light planes and helicopters and maybe a tank or two.

Apparently they've read UC and EFAD too.

they heard about a group of gun enthusiasts wanting to buy a town ;)

:(

It is a DD.

And there's one stamp for the rifle, one for the can. Of course our wise, ethical, and wonderful FBI doesn't need to pay the tax on them.

I wonder if old Lon is going to name these in honor of Vicki Weaver.

Because they're special. As is Lon.

Training ammo $9.50 each

surprisingly economical to shoot...

:D

http://www.anzioironworks.com/images/bulletsizes.jpg
From left to right: .223, .338 lapua, 50BMG, 20MM Vulcan

So, anybody know if this 20mm is man-portable?:laughing:

i could shoot moa at 100 yards offhand with it:flipoff2:

http://www.anzioironworks.com/images/20mm022standingatangle-FP.jpg

I don't see why not

So, anybody know if this 20mm is man-portable?:laughing:

As man portable as any 100+ pound rifle can be. :laughing:

As man portable as any 100+ pound rifle can be. :laughing:

People thought humping the pig was bad. :laughing:

i could shoot moa at 100 yards offhand with it:flipoff2:

The most important, yet most ignored piece of intel about precision shooting known to mankind right there:grinpimp:

not really sure what they need them for but i sure want one:D



At Ruby Ridge, they had to wait for Randy Weaver's wife to open the door before they could shoot her in the head while she was holding her baby. Now they could blow through any part of the house, and do it from the next county. But it is a pretty cool piece.

As man portable as any 100+ pound rifle can be. :laughing:

It's the FBI. Anzio will construct the entire thing out of titanium and shove a chrome-moly sleeve in the barrel.

It's the FBI. Anzio will construct the entire thing out of titanium and shove a chrome-moly sleeve in the barrel.

Man, talk about light weight then :eek: :grinpimp: !!


"Available in 59lbs to 130lbs & up"


Say my version weighed 100lbs. What would it weigh if it was made of titanium :D ??

As man portable as any 100+ pound rifle can be. :laughing:

It's the FBI. Anzio will construct the entire thing out of titanium and shove a chrome-moly sleeve in the barrel.

It looks like ones wallet is the only limitation as far as what they would build.


BTW; What would be the cons of having one made of titanium if cost wasn't an issue?




Also; I hate these kinds of threads/posts because when a company like Anzio states "You think it up – We’ll build it" on their website, I would be the type to take them up on their offer and build a can plinker like the 20mm!

It looks like ones wallet is the only limitation as far as what they would build.

BTW; What would be the cons of having one made of titanium if cost wasn't an issue?

Gale McMillan said he made a Ti barrel chambered in .308 and the 1st eight inches of rifle bore past the throat disappeared due to "gaulding."

http://yarchive.net/gun/barrel/materials.html

Gale McMillan said he made a Ti barrel chambered in .308 and the 1st eight inches of rifle bore past the throat disappeared due to "gaulding."

http://yarchive.net/gun/barrel/materials.html

Interesting.. It has to suck spending that much time building a Ti barrel only to have it destroyed within 20 rounds.

Galling ;)

Interesting.. It has to suck spending that much time building a Ti barrel only to have it destroyed within 20 rounds.

Galling ;)

He should've tried using a sabot round.

Didn't a major manufacturer have a titanium rifle for a while? Like, when I was a kid, say early 90's.

Galling ;)

i have seen it spelt both ways by people who i think would know what they are talking about. i am confused what is the correct way:p. i have been using galling but not with certainty.

i have seen it spelt both ways by people who i think would know what they are talking about. i am confused what is the correct way:p. i have been using galling but not with certainty.

Galling is cold welding of metals from excess friction. Gaulding refers to chaffing of the skin. While both kinda work, IMO galling is "more correct". Stainless steel has a problem with galling in fastener applications.

It's the FBI. Anzio will construct the entire thing out of titanium and shove a chrome-moly sleeve in the barrel.

If those dumb fawks want to touch of a 20x103mm round on their shoulders in a lightweight weapon system, they can be my guest.

man... think of how many zombies you could dispatch with these bad daddys. what are the grains of these projectiles?(!)
http://www.anzioironworks.com/images/bulletsizes.jpg

gall  /gɔl/ Show Spelled Pronunciation [gawl] Show IPA
–verb (used with object) 1. to make sore by rubbing; chafe severely: The saddle galled the horse's back.
2. to vex or irritate greatly: His arrogant manner galls me.

–verb (used without object) 3. to be or become chafed.
4. Machinery. (of either of two engaging metal parts) to lose metal to the other because of heat or molecular attraction resulting from friction.
5. Metallurgy. (of a die or compact in powder metallurgy) to lose surface material through adhesion to the die.



Gaulding is an improper derivitive.


20mm is 1600 grains, almost 3.5 ounces...