|
: Custom Nissan OEM steel wheels MountainTop 12-01-2009, 03:23 PM Anybody interested in a set of 4 custom 15x8 OEM Nissan steel wheels? I had these made for my 1993 pathfinder. The centers of the OEM steel wheels were removed and professionally installed into 15x8" wheel blanks. The backspacing is 5.5" (stock is 4.5") and allow you to run 33" tires with very little tire sticking out past the body. I have over $500 invested in these wheels! $100 + shipping. Located in Boise ID - 83714 jdm_eg 12-05-2009, 03:04 AM are they still for sale? got any side and lip pics? MountainTop 12-05-2009, 08:21 AM They are still for sale. Don't have any pictures of the lip. They are standard steel wheel lips. They have no damage at all. Mike MountainTop 12-15-2009, 08:11 AM Reduced - $150 + shipping. Thata a deal! MountainTop 01-03-2010, 03:37 PM anyone? unimogken 01-04-2010, 11:24 AM Tempting. Do you have a picture of the backside so I can see the welds? MountainTop 01-06-2010, 08:03 AM These wheels were built at Wheel Techniques in Campbell CA. There is nothing wrong with them - they were on a street driven pathfinder. MountainTop 01-28-2010, 10:40 AM ttt MountainTop 02-09-2010, 08:16 AM ttt MountainTop 02-22-2010, 08:06 AM ttt RickyMartinZ28 02-22-2010, 11:56 AM I happen to think those are sweet. I love a "stock" look. I already have some similar though... ); MountainTop 03-02-2010, 10:06 AM Anyone else? How about $100 plus shipping. Shipping estimated around $110 for the lower 48. RickyMartinZ28 03-04-2010, 05:36 PM Good luck, Bump... Wish shipping wasn't so expensive..... brianBFD 03-04-2010, 06:10 PM You might want to try these sites... Some of the Frontier guys might be interested. http://www.nissantrucktech.com/ http://www.clubfrontier.org/ MountainTop 03-29-2010, 08:32 AM ttt Rockbreaker 04-16-2010, 04:39 PM I'd like to buy these rims for $100 plus shipping. Would you get a shipping quote with FedEx freight to 11721 business? (that's Long Island, N.Y.) I've used them before, they're the most inexpensive for these types of things, It might even be better to ship them one or even two at a time. If you're willing to do the leg work with the shipping, I'll buy them. If you want you can call me Ed 631/275-2155 MountainTop 04-16-2010, 11:57 PM I'd like to buy these rims for $100 plus shipping. Would you get a shipping quote with FedEx freight to 11721 business? (that's Long Island, N.Y.) I've used them before, they're the most inexpensive for these types of things, It might even be better to ship them one or even two at a time. If you're willing to do the leg work with the shipping, I'll buy them. If you want you can call me Ed 631/275-2155 Ed, I will look into it. The price I quoted was the best UPS could do. That was shipped as two packages, each with two rims bundled together. Mike Rockbreaker 04-17-2010, 11:50 AM Thanks. I appreciate it. Did you have any problems with the backspacing on these rims rubbing at full turn? since they're an inch further in, Just curious. Ed MountainTop 04-17-2010, 08:30 PM Thanks. I appreciate it. Did you have any problems with the backspacing on these rims rubbing at full turn? since they're an inch further in, Just curious. Ed No problem with the rubbing. I measured the oem 15x7 aluminum wheels and 31's on my pathfinder and realized you could easily go 1" inboard and not rub. I ran 32's with these rims with no lift without rubbing. MountainTop 04-19-2010, 07:53 AM Thanks. I appreciate it. Did you have any problems with the backspacing on these rims rubbing at full turn? since they're an inch further in, Just curious. Ed Sent you a PM MountainTop 04-20-2010, 11:20 AM Packaged and ready to go! MountainTop 05-03-2010, 01:50 PM Come on - $100 + shipping! MountainTop 05-19-2010, 09:41 AM ttt MountainTop 08-02-2010, 10:06 AM Still for sale! | |