Well I finaly got some pic's of the wheel centers and a wheel. I had lost of people ask what they looked like so here they are. Send me a PM for more info. http://www.respite.org/images/cj66dean/hummer1.jpg http://www.respite.org/images/cj66dean/hummer2.jpg

Looks pretty beefy! Looks a bit heavy, too. Did you widen the wheel at all? Are the centers hub-centric or nut-centric?

I wouldnt call this anymore advertising then your 6x6 post.

If you didn't make any money, then why is it called USA6x6 #002?
IF it was named after my company, i would want some money.

If you didn't, sorry, i was under the impression you helped build it and that is what your company did.

Originally posted by Daniel

Also the rule is when someone asks you can answer ...not otherwise..

And people have asked. I'd spend the next hour finding it for you, but I have more to do than just that. BTW, I wanted to see them too.

What is he blatantly advertising ? It says here are pics of his wheels and if you want more info pm him.

nice wheels

66CJDEAN,


Thanks for finally posting those pics....

hey daniel he doesnt own a yard full of military shit.in fact i asked him to post the pics also.dean they came out fawking sweet my man.i am sure you will be making alot of them i know you will be making me 5 for sure.hahahaha . i guess i will go with 4" of bs i will be sending my 5 rims to you by next week.i left you some phone messages and pmed ya to.

good job dude i knew you can do it hahahahh!

ill speak to ya soon...


dont ya love capatalism......

god bless america...hahahhahahah!

wow, somebody is a little irratated, this guy just made some wheels big whoop, what about all thos mog9 post that i see around, samething, relax a little

Ben

looks good

Originally posted by Daniel
Ben I did the samething 6 months ago... I almost got banned for advertising:) mods will be up in the morning...

MOG9 post... Didnt/ wont make 1 DIME:)

You were also posting prices and stuff with yours, now that would be blatent advertising.

Originally posted by Daniel
How come your allowed to Blatantly advertise?

Show me the thread where somebody asked?


because he is cooler than you!


:flipoff2: :flipoff2: :flipoff2:
Sweet Dean!
Adam,

Originally posted by pigpen62
66CJDEAN,


Thanks for finally posting those pics....

yeah me too I was wondering about those

Adam,

Dang Dean, those look nice! :D


Frank

yeah I was wating for them pics ;)


dont worry Daniel's bra is a little tight today

:D

rock awn dean, i am assuming those are still 16 soemthig sixe fore tires. as for advertising, SCREWRWE everyone, he isnt doing anythign wrong! jiMMy

Nice work Dean...........

you definetely can do wonders with steel.

--Sherpa

Advertising? I didn't know you had a bussiness Dean? I thought you just helped people out on this board.

I recently had a problem with the "advertising" issue also. I treid to offer my services in my area to anyone that needed bending because I just purchased a bender and my thread was locked! I honestly do not see the problem with advertising anyway since most of the people here need certain things and look here to get them. The fact that you make people aware of how you can help them seems like a perfect use for the board. I thought that is what we were all here for anyway.

I understand that you don't want dealers popping in on every thread posting prices, but there seems to be a greater need of tolerance.

I agree. I think there needs to be a services offered forum or something. I'd like to be able to search it to see who has what in my area.

Daniel, lighten up a bit. I'd probably let somebody else complain about it rather than soil myself over it. It's making yoiu look bad on a board that otherwise respects you a great deal. Wanna make some money? Sell me some Mog axles.

Oh yeah, while I'm here, I have a bender a tube notcher and a welder if anybody wants some work done.
















just kidding. :flipoff2:

-Jack

Originally posted by IronBenderII

Oh yeah, while I'm here, I have a bender a tube notcher and a welder if anybody wants some work done.


-Jack

if you could load it in your truck and bring it all to houston, you can do a full exo for me. :D :D :D

Originally posted by Daniel
HEy no problem everybody ...Camo must not have a problem here either... so who am I? ... Ill post pics tonight:)



Cool, I like seeing different peoples work

Originally posted by surlynkid


if you could load it in your truck and bring it all to houston, you can do a full exo for me. :D :D :D

Drive up to NJ and I'll do it for 'ya.:D

who is being offensive daniel:confused:
i really dont see what the fawk is the problem is.
when it comes to mogs noone says anything about your stuff even though you dont even build it,like wolfgang and son;)
thats a plug for my boy daniel in germany....

we all know 6x6 has some nice work...

dude relax man they guy isnt paying his fawking mortgage with these rims he is just merely help out others with his skills.

i know you make them and my boy at 4wdfactory makes them and jason at twisted ,but IMO deans stuff has the nicest design and we all know deans welding and workmanship:eek:

to everyone else who doesn't know deans work,i can tell you right now he isn't a butcher and he takes pride in his work...

good luck buddy ...

they look good dean:cool:

Looks like one of those Ninga boomarang thinghys

What gives hummers and rim jobs? Lets get back to the 4x4 stuff

I wouldnt mind getting mine done that way in the future, Ill keep it in mind for sure.

Dean, how come they arn't chromed yet.:flipoff2:

Those look :rainbow:
Can I drop mine off on Friday :flipoff2: Call me on my cell if you read this...

Originally posted by Albino Man
Dean, how come they arn't chromed yet.:flipoff2:

Chrome tank wasn't ready:flipoff2:

Just wanted to give my props to Dean :)
I bought a set of 5 centers from him back in July I think...?? I put them on my hummer rims I had and they fit perfect for 3.75" Backspace. Beyond that, you'll need to press them in a bit...
But 3.75" was what ended up being perfect for me...

Anyhow, I had a great experience dealing with him.
Great price and great service.
Here is a pic of them on my truck:
http://www.imagestation.com/picture/sraid34/pc7e17c99cdf2acf71a1ca80bb5fc470c/fd36c3f3.jpg
I know, 14bolt Clearance Sucks! :flipoff2: :D

Originally posted by Boss
I know, 14bolt Clearance Sucks! :flipoff2: :D

From the looks in the picture a little time with a grinder could help that problem. :flipoff2:

Daniel if you hadn't said anything most of us would have had no idea that Dean was making the centers. You pretty much shit in your own lunch with your comments. I thought he was just posting pics of new wheels until I read your comments.

Daniel,

shut up, your just butt hurt over the fact that dean make 4wd stuff for a hobby. keep in mind he has a real job and sells thing at his cost. so get off of it

you know daniel i had some respect for ya until now ...well to be honest with ya until i found out you dont build shit.:flipoff2:
you are the middle man,you get others to build you shit and you say its you.example taradon.:confused:
that was really uncool to slap a pic up of a rockwell humvee ...who cares about your shit rockwell wheels. most of us that are dealing with dean are running 1 tons.

don't be a pussy dude .start your own post or your afraid its gonna get knocked off.

man i hate to say this but danial has a real job too. and can get the center any lug pattern you want. it is just that he has taken some serious heat for pimping his shit[as was written]and other have not had anything said to them. and i make all my own shit, and don't get anything from danial. mike

well dude its not like you havent been advertising your stuff and rims . what is funny is that dean still beats you on the prices to do the mod.
hahahahahah:flipoff2:
100$ he sandblasts the rim,plasma cuts the center,and welds in as true and straight as it will ever be center that isn't just a piece of steel but with a kool looking design...

tell me how can ya beat that...all for 100$ /a rim ...that is alot of work to do ....my half shell 's will be sent out soon,dean

Originally posted by tj7
you know.... i had some respect for myself until now ...well to be honest with ya until i found out that I don't know shit.

















Sean

hahahahah! thats pretty funny dude...i was like whatttttttt did i write that :flipoff2:
why do you say that?

I read this post before Danial replied and was like wtf? This is gonna get deleted. I think regaurdless of how much profit anyone makes if they are charging for a service they should not be able to advertise.

I wanna hear advice/ product reviews/ announcements from wheelers on PBB, not the vendors.

I think Danial is right but not necesarily going about it the right way. If I was you Danial I would have just reported it to a Mod.

Live and learn, if I ever get some money (:rolleyes: ) I would love to support Danial and all the other great guys that support the BB, unfortunatly I have to hack shit together cause Im always broke.:(

Originally posted by e cliff
Daniel,

shut up, your just butt hurt over the fact that dean make 4wd stuff for a hobby. keep in mind he has a real job and sells thing at his cost. so get off of it

Last time I checked 4x4 related business' were 'real jobs'.

Also, your being a dick lately, have you always been that way?
(Wasent it you that was saying people that flame are fucks, idiots, etc?):confused:

dean isn't a vendor!! he is an artist,that does stuff for people he likes for cost plus beer:D . get over it people:rolleyes: .

Yes I build Daniels Mog axles for him, he doesn't accept any money.

I asked why he advertises for me and it is as simple as I gave him the best price, and the service was good so he says he will help me out. No money goes to Daniel.

Daniel has got shit on when he posts the same things so I would be defensive too.

Any way Dean and Daniel make really nice stuff and I wouldn't hesitate to buy anything from them.

Don Henry

good save daniel,you are on my okay list again;) .

i for one remember a whole buncha requests for pics of deans centers.

i enjoy seeing pics of what you(daniel) and others are up to.maybe i can steal an idea here and there:D .

Glad to hear it because I was going to be calling you for wheels:D

Originally posted by Daniel
Id like to say that without pirate I wouldnt have any Ideas..I.E. JR?



COOL!!

nice point, and btw:
JR and daniel and others i LOVE those portal 9" mog axles, i drift off to sleep dreaming of those things :eek:

is this abnormal? :flipoff2: :cool: :rolleyes:

and i have been reading on here for ages and remember when you were asking JR about them


just gotta figure out the pinion oiling and im gunna make me some!

now...do you guys:
run sealed bearings?
pressured housings? (i know some mogs have an option to run air pressure, maybe you could fill the housing...... i dunno

treat the pinions with some of that magnatec type oil that will stick to the pinion bearings for ages and lubricate it?

BAH.....i dunno!!!

TELL ME!!

Originally posted by BJ On Roids
and i have been reading on here for ages and remember when you were asking JR about them


just gotta figure out the pinion oiling and im gunna make me some!

now...do you guys:
run sealed bearings?
pressured housings? (i know some mogs have an option to run air pressure, maybe you could fill the housing...... i dunno

treat the pinions with some of that magnatec type oil that will stick to the pinion bearings for ages and lubricate it?

BAH.....i dunno!!!

TELL ME!!
I am guessing that they have a pump like NASCAR

what does the pump run off....electric?

:confused:

thanks mate

thats BONZER :D

What is the secrete why PM the answer and not post it?

Originally posted by TyTy


Last time I checked 4x4 related business' were 'real jobs'.

Also, your being a dick lately, have you always been that way?
(Wasent it you that was saying people that flame are fucks, idiots, etc?):confused:

if you even had a clue what i was refering to. dean has a real job that has nothing to do with 4wd's and he is a hobby machinest not a full money making machine shop:mad: and i think that you (tyty) and me ( e cliff )have been butting heads ever sence that marlins crawler customer service shit started 6 mounths ago. ask any one that has met me in person i will help you with anything that needs fixing, share my beer and sodas, and loan out my spares so i don't think that i am a dick. i have been checking out this board for a long time and have found that the attitude of the members in general has changed alot in the last few years. i hate to see the people rip on other people about being a newbe, we were all newbe's ever since lance redid the board the fist time. back then if you asked a question people would try there best to answer it not say "search newbe" and some times you can't find the answers to the questions that had once been asked. so if you still have a problem with me, bring it, nuff said


cliff

thata boy tell him dude....i was begining to think thats how all you wrong coasters where ...hahahahahah:p

Originally posted by tj7
that a boy tell him dude....i was begining to think thats how all you wrong coasters where ...hahahahahah:p

hey man if the world didn't disagree what type of charater would we all have??? i am glad the there are more than one person making the centers because more compitition. mean less $$$$ for the product, so like daniel said, let the price war begin.


Cliff