have a 97 yukon, thinkin about going manual, just curious if anyone has done this and what the easiest way is to do this. i know im goingto be running into issues with the computer.

have a 97 yukon, thinkin about going manual, just curious if anyone has done this and what the easiest way is to do this. i know im goingto be running into issues with the computer.

tons of SAS guys do it. the computer doesnt really care, the buttons just end up dead in the dash. just pick a t-case carefully.

tons of SAS guys do it. the computer doesnt really care, the buttons just end up dead in the dash. just pick a t-case carefully.

what about the sensors? including the speed sensor.

In a 97 yukon you will have the 4L60E trans with a 27 spline output. Either manual, the NV4500 or the NV3550, will need a 32 spline input.

what about the sensors? including the speed sensor.

usally dont matter with swapin the t-case.

4L60E to NP205 Adapter (http://advanceadapters.com/product/4201/P/N-4l60205-Late-Model-4L60E-Transmission-to-GM-NP205-Transfer-Case.html)

Check the link, It has the VSS and relucter ring your computer needs. Open your Wallet, do it right.