|
ky4wheeler 09-30-2002, 06:16 PM the fawker who last put the floor liner in my jeep did a piss poor job. I tryed grinding it down tonight but didnt get very far. Do you all have any idea how to get this crap off there so i can do it right. I want to take it down to the bare metal and start from there. Also what is the best coating that you have used. I thinking line-x or herculiner right now Jeepmangled87 09-30-2002, 08:50 PM use a grinder with a wire wheel on it, it will take time to get it down to bare metal, I used Herculiner, but would spend the money on something like line X or Rhino liner, its just so much better and thicker. 1RUSTYRIG 10-01-2002, 08:01 AM I would use one of these... http://buy.snapon.com/catalog/pro_det.asp?P65=yes&qt=1&tool=&INV_ONHAND=&FREIGHT=&qty=1&Item_id=54720&PartNo=PT280THUG&Price=399.00&ListPrice=399.00&FORMNAME=5&Desc=Tool%2C+Air%2C+Crud+Removal&SUB_Cat_ID=1161225&SUB_Cat_NAME=Speciality+Air+Tools&Cat_ID=1160886&Cat_NAME=Power+Tools%2C+Air&group_id=13078&group_NAME=Remove-All+Tool&store=snapon-store&dir=catalog | |