shaunlyo
12-15-2009, 12:24 PM
Befores are well used 6.5" Fabtech and 33x12.5x18's 1/2 ton
Afters are a little taller and 37x14x16.5 3/4 ton
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs156.snc1/5808_1089241882292_1563827980_30196067_6295800_n.j pg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs094.snc3/16149_1149850277464_1563827980_30323732_1163161_n. jpg
http://hphotos-snc1.fbcdn.net/hs156.snc1/5808_1089241842291_1563827980_30196066_4103939_n.j pg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs094.snc3/16149_1149850237463_1563827980_30323731_5291445_n. jpg
http://hphotos-snc1.fbcdn.net/hs136.snc1/5808_1089241722288_1563827980_30196063_876157_n.jp g
http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs094.snc3/16149_1149850157461_1563827980_30323730_2889562_n. jpg
chevyforlife502
12-15-2009, 01:59 PM
Looks more like a man's truck now nice work
VHD44
12-15-2009, 03:21 PM
Nice truck, where in Nevada are you located?
dfl701
12-15-2009, 10:29 PM
what did you use? i see coils so did you fab the stuff yourself or what?
leeman1790
12-15-2009, 10:34 PM
I like the 4 lug nuts on the front end...beef:flipoff2:
shaunlyo
12-16-2009, 07:14 AM
It's 4 lug beef because I have been swapping wheels and tires making sure evrything fits.
It's a HP 44 w/ james duff arms and 6.5" BC bronco Coils. Coil buckets are from ballistic. 2006 2500 HD 14 bolt.
Y5mgisi
12-16-2009, 07:39 PM
We are going to need much more pictures sir.
HAPPYJOHN
12-16-2009, 10:15 PM
We are going to need much more pictures sir.
X2, build thread? Nice truck.
dfl701
12-16-2009, 10:35 PM
X2, build thread? Nice truck.
that would be nice. if you dont mind, how much you got into the setup? seems like a fairly cheap but effective way to link the front.
454_LPG
12-16-2009, 10:36 PM
I am shure the crack heads that evencahly steel your wheels will thank you fore cuting there work load in half while they steal your shit :stirthepot:
It's 4 lug beef because I have been swapping wheels and tires making sure evrything fits.
It's a HP 44 w/ james duff arms and 6.5" BC bronco Coils. Coil buckets are from ballistic. 2006 2500 HD 14 bolt.
shaunlyo
12-17-2009, 06:54 AM
Rest of the lug nuts are on now. As stated it was just for temporary swapping of wheels and tires. Doind a cross country move in 9 days and will be swapping radial 35's on and loading up the 37's in the bed.
Don't have too many pics of the in process, I have a few more. Had the camera during the build up just forgot to use it most of the time.
Rebuilt and regeared the axle. It was 3.55's now 4.10's all new seals and bearings, all new brake calipers, rotors, pads, brackets
New Hubs
Coil buckets are from ballistic.
Arms are from James duff
Built the crossmember
Coils are from BC bronco 6.5" lift
Tierod and draglink ends and pitman arm are from Parts mike
10 ft of 1" ID .250 wall DOM
New dewalt grinder and lot's grinding discs
14" travel Bilstein 5150's
Steering stabalizer
front and rear drivelines
2006 14 bolt
all new brake calipers, rotors, pads, brackets
New u bolts
Lifted brakelines that were onmy truck worked.
New wheels and tires (6 lug to 8 lug)
Still needed
limiting straps
bump stops
Atlas or 88-98 241 w/ VSS adapter or Front slip yoke eliminator because Autotrac case does not work well with SAS unless you do a front slip yoke eliminator.
As too how much. I do not want to calculate. But since I bought stuff i did not use and changed my plan along the way because stuff did not work as planned I spent more than needed. I am sure there is more