Looking for something to use on my 3+3 12v swap.
When we did the ford, we used a tank selector from an old chevy of mine, which worked all right, but I'm wondering if there is a better option.

The factory Chevy piece is kind of like this
http://pollak.thomasnet.com/viewitems/fuel-tank-selector-valves/light-truck-6-port-motor-driven-valve?&forward=1

But I'd like to see 1/2" ports if possible.

My CC is currently on Propane, so I don't have a factory valve, but I have a few sets of factory saddle tanks, and a Blazer Tank for the rear end, would like to be able to switch between them all.


Anyone have a better option? That also switches the fuel sender?

i use the ford 1987-1997 diesel because it also switches the sending unit between tanks all down on the frame i thought gm used the switch but its been 10 years since i last dabbled with this

The Chevy does, but I don't have another one, so since I've got to buy something anyways, I figured I'd try to upgrade.

I'm currently searching for a valve for my project that has 1/2" send and 3/8" return lines. I've found a few that are used for boats. Most are manual. I think I've found one or two that are electric switchable. They're not cheap.