I'm looking for a DOM tube supplier in the south jersey/philly area. any ideas?
perferably cash and carry, i'm not a buisness. thanks for your time BJ

Depending on where you are and what you want,, Zach www.atozfab.com has some tube. Give him a call and see.

www.liquidironindustries.com probably is closer and should have it as well. West Berlin N.J.

where are you in pa or jersey

fazios in washington township should be able to source it.

pa steel as well.

SW race cars will sell you over the counter in spring city pa

gambordella racing in williamstown should help you out..Tony is a great dude..

FAZZIOS DOES HAVE A GOOD SUPPLY OF DOM FROM 1 INCH TO 1,75 I JUST PICKED UP 1.75/120 WALL FOR $83 FOR 20 FOOT LENGTH, AND 1.5/120 WALL FOR $71 FOR 20 FEET. tHEY EVEN COME WITH MILLCERTS IF YOU NEED THEM. IS THIS A GOOD PRICE, I DONT KNOW ITS JUST THAT THEY ARE CLOSE TO ME. GOOD LUCK WITH YOUR BUILD PLAY TIME.

FAZZIOS DOES HAVE A GOOD SUPPLY OF DOM FROM 1 INCH TO 1,75 I JUST PICKED UP 1.75/120 WALL FOR $83 FOR 20 FOOT LENGTH, AND 1.5/120 WALL FOR $71 FOR 20 FEET. tHEY EVEN COME WITH MILLCERTS IF YOU NEED THEM. IS THIS A GOOD PRICE, I DONT KNOW ITS JUST THAT THEY ARE CLOSE TO ME. GOOD LUCK WITH YOUR BUILD PLAY TIME.

I didnt know they carried all that, Its been awhile since I inquired about it there, I frequent there for nut and bolts type stuff and grinds wheels often.. thanks for all the info

Dillsburg aeroplane works is mostly a 4130 place, but they carry mild DOM in the thinner wall sizes too.

mcknight steel in ivyland pa has the best selelction and prices i hhave found

Bill, I can have stuff delivered to your door at my cost, but if you just need a piece or two I would check out Timmay as you would totally dig his shop in Berlin anyway.

BTW, I would not buy tube from Fazzio's any more. I thought I used to have a shitty welding machine until I stopped buying from Fazzios and bought real tube and whalah, better welds with less inclusions. Even the Ryerson DOM I have bought there seemed to be bad. They buy seconds and thirds from China usually--stuff that did not meet the specs of the company that was supposed to buy the ship load.

Lawrence Engineering in Trenton.

FAZZIOS DOES HAVE A GOOD SUPPLY OF DOM FROM 1 INCH TO 1,75 I JUST PICKED UP 1.75/120 WALL FOR $83 FOR 20 FOOT LENGTH, AND 1.5/120 WALL FOR $71 FOR 20 FEET. tHEY EVEN COME WITH MILLCERTS IF YOU NEED THEM. IS THIS A GOOD PRICE, I DONT KNOW ITS JUST THAT THEY ARE CLOSE TO ME. GOOD LUCK WITH YOUR BUILD PLAY TIME.

I wasn't aware that Fazios carried DOM, where do they keep it? Do you have to ask for it? I have been there numerous times and have never seen DOM. I have seen seemless tubing there before but am pretty sure that that was pipe.

I have always gotten my DOM at Dillsburg Aeroplane Works, but when I buy it I am normally buying for a project and buy quite a bit. If I need just a stick or two I will buy it locally and save the drive.

Bill, I can have stuff delivered to your door at my cost, but if you just need a piece or two I would check out Timmay as you would totally dig his shop in Berlin anyway.

BTW, I would not buy tube from Fazzio's any more. I thought I used to have a shitty welding machine until I stopped buying from Fazzios and bought real tube and whalah, better welds with less inclusions. Even the Ryerson DOM I have bought there seemed to be bad. They buy seconds and thirds from China usually--stuff that did not meet the specs of the company that was supposed to buy the ship load.

Thanks Zach.. let me know next time your down.. maybe stop by and see the new shop.. its almost done, the outside anyway

Thanks Zach.. let me know next time your down.. maybe stop by and see the new shop.. its almost done, the outside anyway

Yeah, I know. I was down last weekend and wanted to shoot out there, but we ran out of time... Maybe in a couple of weeks.
Be well and Happy New Year!

Bill, I can have stuff delivered to your door at my cost, but if you just need a piece or two I would check out Timmay as you would totally dig his shop in Berlin anyway.

BTW, I would not buy tube from Fazzio's any more. I thought I used to have a shitty welding machine until I stopped buying from Fazzios and bought real tube and whalah, better welds with less inclusions. Even the Ryerson DOM I have bought there seemed to be bad. They buy seconds and thirds from China usually--stuff that did not meet the specs of the company that was supposed to buy the ship load.

Agreed. Fazzios stuff in general is never very good.

If you need some 1.75x.120, 1.5x.120, or 1x.120, I usually have around 200' of each in stock.

Right now i'm almost out after building another chassis but like I said, I try to keep stock. I can get anything next day as well, just let me know what you need.

I just ordered some stuff from speedymetals.com, cool thing is you don't need to order 20ft of something if you don't need it. Shipping to Matawan NJ was only $49.

I get steel from samson metals in Edison NJ too, yes they carry DOM.

Just got a 22.3 ft stick of 1.75" .120 wall from Dillsburg Aeroplane for $98.xx today.

i go to R.S. phillips in sussex, nj. i priced out a stick of 21ft. 1 1/2" x .120 wall and i think is was in the $70 range forgot specific numbers but i looked online at a couple places and they beat their prices even before shipping. it's cool because if you get 2 feet or a full stick same price per foot. they just charge you $5 bucks for the cut which i guess is fair. i think last time i went there i got 7 feet of 1 1/2" x .250 wall and it was something like 67 bucks when metalsdepot.com charges $120 so i think thats a damn steal.

Thanks again everybody and Timmay I've been meaning to stop by your shop and introduce myself . Ive heard alot about it. .. Zach call when ya can I got some news.