I'd like to see some pics of XJ/MJ's front view on full width axles not narrowed.

Lift, tire size, rim back space info also..

Thanks

hey man i got a ton of pics but cant figure out how to get them on here

This one's going back a few years, but is probably the most 'street-ish' front shot.

http://www.pirate4x4.com/forum/gallery/files/3/1/6/2/1/DSC02729Medium.JPG

39.5x13.5 Iroks, on whatever stock GM 8-lug 16" truck wheels are. No idea how much lift. 81" outside measurement.

http://img.photobucket.com/albums/v280/Kraqa/1%20Ton%20Stearing/DSC01987.jpg

69" WMS to WMS

3.75" Back Spacing
10" wide rims
38 x 12.5" TSL's

here ya go :)

http://www.impaks.com/images/ken/100_4190.jpg

38x12.50 TSL on 15x10 w/ 4" backspacing ( i think)

So full widths really don't look that bad at all...

Was worried they would look like a skateboard...

78 ford 3/4ton dana 44, 35/12.50/17 toyos, with like 4.5" of backspacing

I hope this keeps going... how about WMS-WMS measurements too since "full width" can be anywhere from 64" to 69"? :D

I updated my post for ya.

I hope this keeps going... how about WMS-WMS measurements too since "full width" can be anywhere from 64" to 69"? :D

Good idea and thanks..

It's all starting to come into perspective..

There you go..
79 F150 D44hp & ford 9" on 35/12.5/15 km'2 on 15"X8" with 4.5"BS & 8"lift
66"wms-wms.
http://i799.photobucket.com/albums/yy276/GAmoeller/7.jpg

Chevy D60 and 8" wide wheels with 4.5-5 " of back spacing

http://pirate4x4.com/forum/attachment.php?attachmentid=482410&stc=1&d=1259154134

Pretty sure I am 82" wide in the front and 80 in the back.

What's wrong with the "skateboard" look? I personally think it's :smokin:

89 XJ - 78 Ford D44/9" , Forget my off set , w/35 14.5 R15 Pitbull Rockers on 10" rim

http://i45.tinypic.com/2nbbww1.jpg

1979, F250 60's 42x14.50x16.5 10" Wheels 4.5 back spacing

http://i260.photobucket.com/albums/ii39/echo4charlie/FrontEnd.jpg,

66" wms-wms 3.5"bs 39.5" rockers 7" of lift includong portals



http://i26.photobucket.com/albums/c150/xjweeble/Mobile%20Uploads/1260154225.jpg
http://i26.photobucket.com/albums/c150/xjweeble/Mobile%20Uploads/jeep016.jpg

just found this one from before i narrowed my front down. ~

http://i59.photobucket.com/albums/g312/crzyxj/pathfidermay09018.jpg

01 XJ 79' F250 HP44 6'' coils 3-link
35x12.50xR17 LTBs Wheels are 9'' wide and 4.75 BS + 1/4'' wheel spacer to clear the steering.....

Sorry for the shitty Iphone pics....

http://i285.photobucket.com/albums/ll73/Jeeprecon/e90e6fa6.jpg
Pic in the yard to show some buddies the LTBs
http://i285.photobucket.com/albums/ll73/Jeeprecon/f79bbeff.jpg

D-44 -42's w/3 1/2" of backspacing. Best pic i have stright on....

D44 & 9" with 37's, 4.5" BS and about 8" lift

http://i291.photobucket.com/albums/ll293/lgraham09/P2220018.jpg

It depends also on how much crap you take off the front end, whether it looks like a skateboard or not.
Here's my old XJ with a narrowed front end on an '03 SD d60 (skateboard).
The XJ down the hill is running basically the same axle with a stock front end.


http://i131.photobucket.com/albums/p320/hintonsooner/IMG00408.jpg

It depends also on how much crap you take off the front end, whether it looks like a skateboard or not.
Here's my old XJ with a narrowed front end on an '03 SD d60 (skateboard).
The XJ down the hill is running basically the same axle with a stock front end.


Are you running stock SD unit bearings or after market spindles and hubs?

Are you running stock SD unit bearings or after market spindles and hubs?
Don't own it anymore, but they were the stock unit bearings and hubs.
And yes they took a hell of a beating on 39.5"s and never gave any problems.

69" wms iirc.

Even though you don't have it any more is there a build thread for it any where on the net?

And is it running a tri-link upper in the front?

Yes and yes.


http://www.rockhardxj.com/viewtopic.php?f=2&t=1315

Don't own it anymore.

What??? How come? New rig?

The big D.
New rig is planned as soon as I get the funds.
You win some, you lose some.