Just curious, I have a dodge and was wondering if there was any plans for adjustable controll arms, panhard bars and tirod/draglinks. You know just for guys wanting to beef up the frontends with level kits.
Thanks

We have a few parts ready for release for 2500 4x4 rams such as coil over buckets, pan hard drop brackets, upper and lower arm kits, high capacity diff covers, Dodge specific shocks, etc...

Check back in a few days.

https://ballisticfabrication.3dcartstores.com/assets/images/event/Dodge-Nitto-1.jpg

https://ballisticfabrication.3dcartstores.com/assets/images/event/Dodge-Nitto-2.jpg

Jeff

Im wanting to level my 3500 Mega Cab... Subed

JOSH

Oh, and did I mention that a free-spin kit is already prototyped and in testing that is almost 2X stronger than the currently available kits... and is half the cost?

:smokin:

Jeff

Oh, and did I mention that a free-spin kit is already prototyped and in testing that is almost 2X stronger than the currently available kits... and is half the cost?

:smokin:

Jeff




Since you mentioned this, any chance of a Ford kit???? I'm tired of replacing unit bearings. You're making it harder with all this stuff for me to justify keeping my F250 and not jumping to a 3500.

Hell yeah, im glad I said something.

Oh, and did I mention that a free-spin kit is already prototyped and in testing that is almost 2X stronger than the currently available kits... and is half the cost?

:smokin:

Jeff

So you're saying I need to swing by the shop and check it out now that it's done?

I've seen some of the parts for the free-spin kit, and they are nice:smokin:

Since you mentioned this, any chance of a Ford kit???? I'm tired of replacing unit bearings. You're making it harder with all this stuff for me to justify keeping my F250 and not jumping to a 3500.


x2 on Ford :smokin:

Ford is as simple as a bolt pattern change on the hub. NO PROBLEM!

Jeff

Oh, and did I mention that a free-spin kit is already prototyped and in testing that is almost 2X stronger than the currently available kits... and is half the cost?

:smokin:

Jeff

Ive got a dyna trac kit sitting here for my dually... $2300 bucks worth. bummer

Im wanting to level my 3500 Mega Cab... Subed

JOSH

Same

BTW that is one sic mega above

Ford is as simple as a bolt pattern change on the hub. NO PROBLEM!

Jeff



Awesome. So can you give an details on the setup, cost, and availability? Pics maybe ;)

Awesome. So can you give an details on the setup, cost, and availability? Pics maybe ;)

Pricing is yet to be released however the kit will use Dana 60 components including bearings and hubs, and outer shafts. You'll re-use the factory brake rotors and a new tone ring and mount for the sensor is included for ABS.

will it work on 3500 too?

I was just getting ready to do my ball joints and unit bearings.......I'll wait for your kit!

Yes they will work on the 3500 / F-350.

I can have some teaser pics up tomorrow, some of them a bit outdated but you'll get the idea..

This is sweet!!! Thanks Ballistic!!

Will the Dodge free spin kit have 35 spline outers??

I am looking at doing this and was going to do a Dyna trac or Solid Axle kit. Subscribing....

It will have whatever you buy for locking hubs. This kit we plan to provide will come as a complete kit or a 'source it yourself' kit. You'll need stubs, u-joints since you're in there already, and locking hubs. You'll be able to reuse your calipers, rotors, wheel studs and u-joint if you want.

Is this only for the 3rd gen dodges?

I'd be interested if it will work in a 2nd gen. too.

Is this only for the 3rd gen dodges?

I'd be interested if it will work in a 2nd gen. too.

x2 the "free spin" kit is next on my list of purchaseswould be nice to save 50%of what the other kits are dinging :mr-t:

We have a few parts ready for release for 2500 4x4 rams such as coil over buckets, pan hard drop brackets, upper and lower arm kits, high capacity diff covers, Dodge specific shocks, etc...
Let's see those control arms! Hoping they are designed to clear oversized tires and will fit the older (2001) trucks.

There's nothing real special about them, but my 37" tires clear without issue. I'll get pics posted soon.

We also made a carrier bearing drop bracket that will be on the site in 1-2 days. Thanks -

Jeff

No clearance notches or bends or anything? Look forward to seeing pics.

No clearance notches or bends or anything? Look forward to seeing pics.

Jeff's truck has aftermarket wheels with less backspacing...