|
Chief yelling alot 10-02-2002, 11:04 PM ok so I did some mesuring and the stock chev crosmember on the TH400/350 matches up perfecly to the scout frame. I was wondering can I cut a window in the frame so I could bolt the crosmember to the frame and use the window to get a wrench inside the frame iscout62 10-02-2002, 11:11 PM Add some metal to the chebby x-member(make it longer), and add some angle iron to the outside of your frame rails. It's a good idea to NOT remove material from your frame if you can avoid it. Just an opinion. ;) Chief yelling alot 10-02-2002, 11:14 PM fwaking grate idea Thanks iscout62 10-02-2002, 11:17 PM I just got the bandsaw out and cut a new x'member out of a chunk of thick wall box last weekend. :D VERTIGO 10-03-2002, 06:09 AM scout frames are so fucked up paper thin all ready if you do anything to it, it will break bend and everything else, like my bigblock mounts are starting to twist the frame. IH did a horible job making the frame.:D Scout Dude 10-03-2002, 10:39 AM That's cuz SII frames suck...!:flipoff2: Chief yelling alot 10-03-2002, 07:19 PM so whats the problem with the scout frams? Buddha's Ghost 10-03-2002, 08:20 PM Originally posted by Chief Yelling Alot so whats the problem with the scout frams? It's fully boxed instead of like those "other" vehicles with the "C" frame. Don't you know the "C" frames are far superior?C'mon Chief, get with the program. :flipoff2: iscout62 10-03-2002, 08:29 PM Huh? :confused: Buddha's Ghost 10-03-2002, 08:36 PM It's called s-a-r-c-a-s-m...:rolleyes: :flipoff2: Chief yelling alot 10-03-2002, 10:26 PM oh ya got ya ;) iscout62 10-03-2002, 10:35 PM One can never be sure if it's sarcasm or just plain old stupidity. :flipoff2: ;) :flipoff2: | |