I have a toyota with a 1995 d44 isuzu rear and a 1975 d44 waggy front and I just have a few questions before I install these carriers. I bought a aussie locked carrier that was in a ford bronco d44 front. Will that carrier and locker fit into the isuzu d44? I also have the carrier with LSD out of a 98 d44 amigo and I would like to put that carrier into the front. Both carriers are 3.93 down and I have existing thick 4.10s in the rear and ribicon 4.10s to put in the front. Thoughts?

Ok so the rear aussie locker went in the isuzu dana 44 just fine but I ran into a problem on the front waggy axle. The isuzu lsd is a 3.93 down carrier and the standard 4.10 gears wouldent work on that so I thought I could just throw in the 4.10 rubicon gears and call it a day but it seams that the pinion is a little different than the waggy pinion. Will the rubicon pinion fit in the waggy dana 44? Its deffinattly shorter..

i read that the 98 and up isuzu 44 had some weird differences like pinion length and that it was not compatible with regular dana 44 parts. If you google it you can find it out there.