|
: destroyed my t-case wanna goto manual (97 gmc) 5150kon 02-21-2010, 10:35 AM well broke t case in half this weekend, so i figured its time to go manual. i know adv adapters makes a kit for this due to the speed sensor, but its damn expensive. seeing if i have another way around this. also would it be easier to switch to manual trans on top of this? 97 yukon sas sas'd96TAHOE 02-21-2010, 10:36 AM well broke t case in half this weekend, so i figured its time to go manual. i know adv adapters makes a kit for this due to the speed sensor, but its damn expensive. seeing if i have another way around this. also would it be easier to switch to manual trans on top of this? 97 yukon sas What case/trans do you have now...? 5150kon 02-21-2010, 12:26 PM 4l60e and the push button tcase, i cant remember if it 241 or 243. it DOESN'T have all time 4x4 abig84 02-21-2010, 01:29 PM 208 out of a ford maybe????? you have a driverside drop im guessing. i know you can swap to a chevy 208 but drop will be passenger side chevycrew 02-21-2010, 01:30 PM Just get the manual shift t-case (241) and the linkage out of the same year truck. Its a straight forward swap. brianZ71 02-21-2010, 01:41 PM get a 241 out of a chevy like yours that has VSS. (i think 92+ maybe? can't remember). all you have to do is buy a cheap plug from the dealership and splice your wires with it. make sure you get the right spline input. all 1500's should be 27 spline. here's some info:http://www.gmfullsize.com/forum/showthread.php?t=154868&highlight=diff+swap i can't find the stuff on which plug to buy and which wires to splice but it's supposed to be stupid easy 5150kon 02-22-2010, 09:23 AM perfect! ill look into this. thanks guys. 5150kon 02-22-2010, 10:10 AM now what about switching to a 1 a ton manual trans and t case? would all i need to do is swap the computer? axisT6 02-22-2010, 10:30 AM now what about switching to a 1 a ton manual trans and t case? would all i need to do is swap the computer? You would need to have your current ECM flashed for a manual. If you do this, make it worth while and swap in a NV4500 or Late SM465 depending on whether or not you need overdrive. 5150kon 02-22-2010, 10:42 AM You would need to have your current ECM flashed for a manual. If you do this, make it worth while and swap in a NV4500 or Late SM465 depending on whether or not you need overdrive. know of any write ups on this i can look over? | |