OK... Im building a cheap beater truck & Im not putting front fenders on it...

I just made a radaitor mount( The rad is an 80s 4 core) & want to run tube from the cab to the rad mount..I just cant get it in my head how I should mount it...

Any Ideas???

Heres pix....

http://img.photobucket.com/albums/v137/MUDDOG4X4/Parts%20Truck/tube4.jpg
http://img.photobucket.com/albums/v137/MUDDOG4X4/Parts%20Truck/tube2.jpg
http://img.photobucket.com/albums/v137/MUDDOG4X4/Parts%20Truck/tube5.jpg
http://img.photobucket.com/albums/v137/MUDDOG4X4/Parts%20Truck/tube3.jpg

I would run a hoop from the old inner fender mount locations.


That way you can add shit later as you decide you want more bling, or lights, or some shit...

Anyone eles????

For the firewall or the rad mount or both?
Got a bender?
I'd just get a pipe flange and some threaded elbows from the plumbing aisle :laughing:
.
.
.
.
.
.
.
.
.
.
.

Flange for the firewall:
510590

Bend a big U with each leg going to the firewall, bottom of the U crosses in front of the rad and makes the front of the halo, with a downbar on each side of the rad, maybe tie into the spring towers. Add a crossmember along the top to tie in the rad mount. :flipoff2:

For the firewall or the rad mount or both?
Got a bender?
I'd just get a pipe flange and some threaded elbows from the plumbing aisle :laughing:
.
.
.
.
.
.
.
.
.
.
.

Flange for the firewall:
510590

Bend a big U with each leg going to the firewall, bottom of the U crosses in front of the rad and makes the front of the halo, with a downbar on each side of the rad, maybe tie into the spring towers. Add a crossmember along the top to tie in the rad mount. :flipoff2:


For the rad side... I have the cab side figured out....No bender no acess to one...