Im looking for some kind of list of parts that you can use on Cherokees "89". From other rigs like dodge, ford, and toyota, any really. More specific lifts. Im not really looking to do much other than bolt it on. I do have chop saw torch welder at work, but need this to be easy if im going to try that stuff. So if anyone has a link or ways they used other stuff on theres let me know thanks.
Im trying to build this thing for as cheep as possible, but keep it as quality as it can be too.

I don't think you are gonna find a list of things that will be a direct bolt-on to your Cherokee other than other Jeeps that share the same parts. Hate to break it to ya, but if you want to use parts from other makes, you will have to do more than bolt it on.
Travis..

I know that so let me reword this a bit LOL. :) I can chop, weld, and drill stuff for bolts if needed, the easier the better tho. Thanks.

For suspension, your not really gonna find anything. You can use S-10 or Dakota leafs, basardize your xj pack with it and net about 4.5" and it'll work pretty well, but outside that....buy it.

Some ford coils will net you 4-5", but I highley recomend against it. The rate is way, way, way too stiff. You can also net about 2" with ZJ, V8 coils....but its just a meagar 2".

If you can flare lines, then there's several trucks, vans, SUV's you can pull brake lines off of.

Outside that, nothing. There's tons of other brake mods, steering mods, and misc stuff that'll work with the XJ, but nothing else suspension specific.

Here is a thread on NAXJA. I believe that most of this stuff is to throw together a cheap lift, but there may be some other upgrades in there.
http://www.naxja.org/forum/showthread.php?t=66012

http://www.jeepforum.com/forum/f11/budget-builds-what-junkyard-parts-will-fit-xj-847303/

Hope that helps.

http://www.quadratec.com/

Hope this helps.