For all Pro Rock D44 orders between now and December 23, 2010 receive "FREE SHIPPING"
(normal truck freight in lower 48 states + applicable taxes).

I am a Dynatrac dealer and are offering the Pro Rock 44 to you either as a direct replacement for your factory D44 or as an upgrade from the D30.

http://www.tak-cs.com/pbb/dt/pr44comp2.jpg


Pro Rock 44 PDF here! (http://www.tak-cs.com/pbb/dt/PR44.pdf)




Standard specs:

* Complete custom Pro Rock 44 front axle housing with 12 month limited warranty
* Custom machined Dynatrac high ground clearance, high pinion (reverse-cut) heavy duty nodular iron housing
* Axle width 65.5” (stock JK) when outfitted w/stock wheel ends
* Standard housing geometry, pinion angle, and wheel alignment for customer’s suspension
* Uses new generation JK ring and pinion
* Dynatrac Pro Series nodular iron differential cover
* Dynatrac Jeep coil spring bracket set (Includes heavy duty brackets and installation, trac bar bracket & shock mounts included)
* Heavy Duty 3.0” X .313”(5/16th”) wall DOM housing tube assemblies
* Dynatrac Pro Series extra strength end forgings w/ball joints installed
* Detailed and painted Dynatrac’s signature gloss black

Optional Installed Add-On Differentials - Complete w/Master Install Kit:

* Tru Trac heavy duty limited-slip differential w/R&P choice and 1310 yoke
* Detroit SofLocker differential w/R&P choice and 1310 yoke
* ARB Air Locker differential w/R&P choice and 1310 yoke
* Electric selectable locking differential (JK Tru Lok) w/R&P choice and 1310 yoke

Custom axle shaft mfg choices are numerous. If you want the RCV shafts, I sell those as well but you should run either the Pro Steer upper and factory lower ball joints or both factory joints.

PM for quote: (include any options wanted, shipping location and whether residence or business).


Thank you very much! I am grateful for your business.

Allen

PMs sent! Thank you..

Allen

All PMs returned. Thanks and keep them coming in!!! :beer: s

Allen

Again all PMs return and thank you for your interest.

Let's do this. Let's blow some of these out of here. I want to sell 30 of these in 3 weeks. PM me for a quote.

Allen

rear 44 for a 99 tj sent to 95841

rear 44 for a 99 tj sent to 95841

PM sent. I am grateful for your business.

Allen

pm sent for front pro rock 44's for tj. shipped to 77001

pm sent for front pro rock 44's for tj. shipped to 77001

PM sent back! Thank you!

Allen

PMs sent and thank you!

Great deals to be had here. PM for price to your door. Please be as specific as you can in your message.

Thank you. I am grateful for your business.

Allen

Move 'em out. PM me for price to your door!

I am very grateful for your business.

Allen

prorock 44 rear for a tj to 20141
thank you

prorock 44 rear for a tj to 20141
thank you

Pro Rock 44 is only a front configuration right now. You can get a Trail Series unit direct bolt in but no ARB or Detroit. If you want one of those, you have to step up to the Trail Series 60 or Pro Rock 60.

Let me know what your interested in.

I am very grateful for your business.

Allen

Front 44 with a Detroit, chromo shafts, with or without brakes shipped to 87114

Front 44 with a Detroit, chromo shafts, with or without brakes shipped to 87114

Thank you! PM Sent!

Allen

All PMs sent and thank you. Happy hump day! :grinpimp:

Lots of interest in this product. Don't wait for the tax man's money, order today.

Thank you. I am very grateful for your business.

Allen

JK standard ... 95123

JK standard ... 95123

PM sent, with ?????s

Anyone looking for this product? If so give me a shout and I'll hook you up.

Allen

Great deal on these and other Dynatrac products. PM me for a quote. Please be as specific as possible on what you want (less PM tag and questions). :flipoff2:

Thank you. I am very grateful for your business.

Allen

XJ front with 4.56's and an ARB to 85032. Thx

XJ front with 4.56's and an ARB to 85032. Thx

PM sent thank you!

Allen

XJ front, 4.88's, chromo shafts, lunchbox locker, outters to 12303 NY.

XJ front, 4.10's, chromoly shafts, Tru Trac, outters to 97007 OR

XJ front, 4.88's, chromo shafts, lunchbox locker, outters to 12303 NY.

XJ front, 4.10's, chromoly shafts, Tru Trac, outters to 97007 OR

PMs coming your way in mere minutes.

Thank you. I am very grateful for your business.

Allen

A full line of Dynatrac products is available. PM or post and I will get back to you ASAP.

Thank you. I am very grateful for your business.

Allen

Looking at options.

2010 JK. Looking at the following: 5:13 gears, ARB's front and rear. Alloy shafts.

Quote both d44's in f&r and d60's in f&r please. Shipped to houston, tx. Thanks.

Looking at options.

2010 JK. Looking at the following: 5:13 gears, ARB's front and rear. Alloy shafts.

Quote both d44's in f&r and d60's in f&r please. Shipped to houston, tx. Thanks.


Assuming I could type that fast and that much is a compliment, misplaced, but a compliment none the less! PM coming to you in a few with some clarification and questions.

Allen

pm sent

pm sent

One back at ya!

Allen

how much for one shipped to 77014? 4:56 gears open carrier

how much for one shipped to 77014? 4:56 gears open carrier

PM sent! Thanks guys for the orders. :beer: s

front TJ 44 w/ 4.56 and ARB to 20155

front TJ 44 w/ 4.56 and ARB to 20155

PM sent! Thank you!

Allen

For upgrade or factory 44 replacement, there is no better solution than a direct bolt in application. With the reputation of Dynatrac and a full 12 month unlimited mileage warranty, you be able to wheel with confidence no matter what the terrain.

PM for great deals to your door on this or any other Dynatrac product.

Thank you for your business! I am very grateful.

Allen

-Not sure if ive asked this of u before, BUT do u offer financing or payment options?? This would make it SO much easier to have the entire axle ready to bolt in & run!!!!

-If i were to have u build one id love it to be done 100%, BUT i couldnt afford a $3k or $4k axle upfront!! I would have to buy the housing & then over the next 2 yrs id have to slowly buy the parts & that will SUCK staring at that axle for 2 plus yrs & not having the cheddar to complete it!!

Its a shot in the dark, BUT it doesnt hurt to ask!!
Thanks!!

-Not sure if ive asked this of u before, BUT do u offer financing or payment options?? This would make it SO much easier to have the entire axle ready to bolt in & run!!!!

-If i were to have u build one id love it to be done 100%, BUT i couldnt afford a $3k or $4k axle upfront!! I would have to buy the housing & then over the next 2 yrs id have to slowly buy the parts & that will SUCK staring at that axle for 2 plus yrs & not having the cheddar to complete it!!

Its a shot in the dark, BUT it doesnt hurt to ask!!
Thanks!!

Sorry! I don't offer financing. But if you do a search on Google I bet you can find a company that will do that for you. I am sure they will want a lien on the rig or something else (depending on your credit of course).

You can save a ton of money if you use all your outer stuff from knuckle out.

Let me know if I can answer any more questions or help you in ordering.


Allen

Sorry! I don't offer financing. But if you do a search on Google I bet you can find a company that will do that for you. I am sure they will want a lien on the rig or something else (depending on your credit of course).

You can save a ton of money if you use all your outer stuff from knuckle out.

Let me know if I can answer any more questions or help you in ordering.


Allen


-What would a bolt in housing cost for my 95 XJ??
-What would it cost to add in a locker, (selectable preffered), 4.88's & 30sp chromos w/297x joints w/full circle clips??
-Shipped to 12303??

-What would a bolt in housing cost for my 95 XJ??
-What would it cost to add in a locker, (selectable preffered), 4.88's & 30sp chromos w/297x joints w/full circle clips??
-Shipped to 12303??

PM sent! Happy 4th. :beer: s

Allen

Thursday morning bump. Order today and get it shipped ASAP.

looking for D44 f/r 97 TJ to 98374.

Are there locker options?

Thank you,
Fred

need a quote for a housing to inner C set up for xj. You did say it will save lots if i use my outers correct?

looking for D44 f/r 97 TJ to 98374.

Are there locker options?

Thank you,
Fred

Fred I seriously apologize for the lack of getting back to you sooner. Will send a PM shortly.



need a quote for a housing to inner C set up for xj. You did say it will save lots if i use my outers correct?

Yes! You will save a bunch of $$$ and you won't be buying the same stuff just new. I need a location, and if you want it setup for an JK E-Locker or aftermarket (detroit, ARB, TruTrac).

Allen

Allen

Thanks for the responce.

:smokin:

detroit lock, standard shafts, 5.13 gears for an xj front to 78374

detroit lock, standard shafts, 5.13 gears for an xj front to 78374

PM Sent~!

Thank you. I am very grateful for your business.

Allen

Good Monday morning!

Looking for a deal? PM me for a price to your door or dock. As always, I am very grateful for your business.

Allen

A new month is upon us and whether you're looking for a factory replacement or a project rig, these are an affordable option. Pm for pricing.

Allen

JK width C to C 5.13 ARB with no mounts to 94519

Limited time sale! Now thru August 13th, $1799.95 US, not including applicable taxes and freight! $250.00 maximum freight in lower 48 US.

Thank you! I am very grateful for your business.

Allen

Looking at options.
Quote both d44's in f&r and d60's in f&r please. Shipped to houston, tx. Thanks.

Update for ya. You'll find this funny.

Remeber the quote you did me for the guy who wanted to upgrade his axles. :shaking:

Just heard from him yesterday. He took it to a shop in town, and they hosed him for $2300 bucks.

All they did was: upgrade to alloy shafts in a d35, replaced all the seals and the d35 ring and pinion, replace f and r diff covers, and installed a e-locker in the rear. :shaking:

I guess we can't fix stupid. Oh well.

Can I get a price on a pro rock 44 for a TJ? 4.88 gears, JK locker. Shipped 14612 residential or commercial dock? Thanks

Update for ya. You'll find this funny.

Remeber the quote you did me for the guy who wanted to upgrade his axles. :shaking:

Just heard from him yesterday. He took it to a shop in town, and they hosed him for $2300 bucks.

All they did was: upgrade to alloy shafts in a d35, replaced all the seals and the d35 ring and pinion, replace f and r diff covers, and installed a e-locker in the rear. :shaking:

I guess we can't fix stupid. Oh well.

Nice! He should have gone for the deal I quote him. he was more than a 3rd there already and he would have all new 44s or 9s (can't remember) f/r. :shaking:



Can I get a price on a pro rock 44 for a TJ? 4.88 gears, JK locker. Shipped 14612 residential or commercial dock? Thanks

PM Sent!

Thank you! I am very grateful for your business.

Allen

44 for 04 unlimited 4:88s arb i'll use my shafts and outters. shipped to 79108

44 for 04 unlimited 4:88s arb i'll use my shafts and outters. shipped to 79108

PM Sent! Thank you!

Allen

Sunday morning to you all!

front D44 for a YJ loaded with a ARB and 4.88's shipped to 95492

front D44 for a YJ loaded with a ARB and 4.88's shipped to 95492

PR44 is not available for the YJ at this time. They are only available for the TJ, XJ, and JK. I can quote you a D60 or a Currie Enterprises unit if you like.

Thank you! I am very grateful for your business.

Allen

does the axle come pre-installed with the locker and the gears install...shipping to 65802...i would want the ARB with the 4.88

does the axle come pre-installed with the locker and the gears install...shipping to 65802...i would want the ARB with the 4.88

PM Sent.

Thanks!

Allen

For a limited time we are offering "FREE SHIPPING" on the Pro Rock 44 "Housing Only" for $1959.00 US. Now thru August 31st you get the housing, cover, factory joints installed, setup for either the E-Locker or Detroit/TruTrac/ARB all for $1959.00 US. Add $89.00 for the Unlimited version and add $100.00 for the .5" tubes. Applicable taxes are not included. Free shipping is for the lower 48 US only!

Allen

Got a 05 TJ sport with D30/44. Recently put 35'S and want to regear and lock. Got a quote today for 4.88 motive gears, ARB lockers front and rear, with high capacity ARB compressor. $4200 incl labour plus tax. Since I'm in Canada our local tax is 14%. That's close to 5Gs and I'm still stuck with the d30. Send me a quote for a 44/44 or 44/9" combo with ARB's and 4.88s. Shipping would be to somewhere on the Canadian border with northern Maine. Quite a few companies will hold for us and we transport across the border, or if you ship to Canada even better!

Got a 05 TJ sport with D30/44. Recently put 35'S and want to regear and lock. Got a quote today for 4.88 motive gears, ARB lockers front and rear, with high capacity ARB compressor. $4200 incl labour plus tax. Since I'm in Canada our local tax is 14%. That's close to 5Gs and I'm still stuck with the d30. Send me a quote for a 44/44 or 44/9" combo with ARB's and 4.88s. Shipping would be to somewhere on the Canadian border with northern Maine. Quite a few companies will hold for us and we transport across the border, or if you ship to Canada even better!

Sending you a PM!

Allen

Last day for this sale! Free shipping amount to $180~$250 off the cost of this affordable swap. PM to with order info (less CC details of course). I will get back to you ASAP.

Allen

Time is getting low on this deal. Get in on while you can.

Allen

front axle with arb shipped to 47119 with 488 gears can I still get free shipping

front axle with arb shipped to 47119 with 488 gears

Sending PM now!

Allen

need a price for a 2006 tj want 5:13 gears and abr air lockers needing front and backs with disc brakes and front lock outs, do you have these in a pro rock 60 sent to 52806

need a price for a 2006 tj want 5:13 gears and abr air lockers needing front and backs with disc brakes and front lock outs, do you have these in a pro rock 60 sent to 52806

Will be sending PM shortly.

Thank you!

Allen

05 tj. Have all new parts already to rebuild rear 44 housing but housing is bent. Do you have anything that will work with these parts[30 spline cromos, open carrier with spartan and, 488s]. Thanks. shiipped to 92234

05 tj. Have all new parts already to rebuild rear 44 housing but housing is bent. Do you have anything that will work with these parts[30 spline cromos, open carrier with spartan and, 488s]. Thanks. shiipped to 92234

I don't have any pulled axle housings, if that is what you're asking. Let me call around and get pricing on a new empty TJ housing for you. Would you be willing to pick it up in SoCal?

Thank you!

Allen

Edit: P.S. I might be able to find you a pulled housing at a vendor in SoCal. Let me check.

05ruby,

spoke with Kent at Currie and if you are interested in a pulled unit, he will check and see if they have one and get me a price. Aside from that, a new D44 setup for a TJ with brackets and nothing else would be $1265.08 including CA taxes. Shipping would be $125 if you didn't want to drive the 100 miles to pick it up.

Let me know what you wold like to do.

Allen

If theres a pulled unit. I am very interested! Going to ad truss so looks do not matter!

If theres a pulled unit. I am very interested! Going to ad truss so looks do not matter!

I checked with both Currie and Dynatrac and neither have any. Sorry! Try craigslist, this or other forums, or new.

Good luck,

Allen

need a price for 01 xj. d44 front 4.56 and a arb locker. shipped to 52722

Price for pro rock 44 front with arb and 4.56 for 04 tj to 73112.

need a price for 01 xj. d44 front 4.56 and a arb locker. shipped to 52722

PM sent. Thank you!

Allen

Price for Pro Rock 44 w/arb and 4:88's shipped to 98372.

Also, price for the same w/o locker.

Price for Pro Rock 44 w/arb and 4:88's shipped to 98372.

Also, price for the same w/o locker.

What rig? Using your outer stuff or wms~wms? If you're not running a JK rubi you will need inner shafts. RCV or competition inners from Dynatrac? W/O locker meaning open carrier and gears installed?

Allen

Sorry, TJ and want to use my out stuff.

W/O locker meaning empty housing and unistalled gear set.

I also sent you a PM.

Sorry, TJ and want to use my out stuff.

W/O locker meaning empty housing and unistalled gear set.

I also sent you a PM.

Back at ya on the PM side! :D

Edit:

BTW,

you have to have a 3.73< locker and a new set of JK gears. You can't use a 3.92 an up carrier in this housing even if it is setup for aftermarket locker.

going up. PM or post with specs and zip code.

Thank you very much!

Allen

Get in the order soon for your winter time projects.

Thank you!

Allen

bump for additional offer.

Quote for TJ with Detroit and 488 including inner and outer shafts. Would like 64 wms to wms using ford 5 on 5.5 outers

Hey Allan..quote w/ ARB and 4:56's....5 5.5 BP??... and shipped tp 80122??

Quote for TJ with Detroit and 488 including inner and outer shafts. Would like 64 wms to wms using ford 5 on 5.5 outers

PM Sent. You didn't specify whether you wanted a complete bolt in unit. So I quoted you with just the end forgings. Assuming you were going to config the outers yourself. If this is inaccurate, please reply to PM with more details.


Hey Allan..quote w/ ARB and 4:56's....5 5.5 BP??... and shipped tp 80122??

What rig is this for? Are you looking for complete bolt in unit? More details via PM please.


Thank you guys! I am very grateful for the opportunity to provide you with the products you want.

Allen

TJ 44 4.88s with prices on Dynatrac shafts and RCVs, Detorit and ARB shipped to 78148. I want to know what my options are price wise as I am gearing up to do a swap. I can reuse my outer knuckles. Would using my own outers be a huge savings? Id need 5x5.5.

Thanks
Shawn

TJ 44 4.88s with prices on Dynatrac shafts and RCVs, Detorit and ARB shipped to 78148. I want to know what my options are price wise as I am gearing up to do a swap. I can reuse my outer knuckles. Would using my own outers be a huge savings? Id need 5x5.5.

Thanks
Shawn

Shawn,

I will send you pricing. Plus I have lots of questions for you. Check your PMs shortly.

Thank you!


Allen

Free shipping promo! Get in your orders today.

Thank you.

Allen

empty TJ housing to 08318? thanks

empty TJ housing to 08318? thanks

PM Sent! Thank you!

Allen

JK D30 front upgrade

I have 4.88 G2's already in the current D30, are those reusable? What else would I need for the kit besides whats included, chromo axle shafts?

+ ARB

zip 92101

JK D30 front upgrade

I have 4.88 G2's already in the current D30, are those reusable? What else would I need for the kit besides whats included, chromo axle shafts?

+ ARB

zip 92101

Good day!

The only thing that is reusable off the Dana 30 are from the knuckles out including your outer shafts. You have to have custom inner shafts when going to an ARB. Otherwise if you were to use a JK E-Locker, you could use Rubicon moly shafts for the inners. I can provide the inner shafts for you or sell you RCV shafts for it.

Sending PM now!

Thank you very much.

Allen

Quote for Pro Rock 44 to replace Dana 30 on 09 JK.
Housing only
5.13 ring & pinion
ARB locker
Axels RCV & Dyna

Quote for Pro Rock 44 to replace Dana 30 on 09 JK.
Housing only
5.13 ring & pinion
ARB locker
Axels RCV & Dyna


PM Sent. Thank you!

Allen

Could I have the price on a pro rock 44 (complete with outers) with 5.13 gears, chromo shafts, an ARB and set up for 5 on 5.5 to go into a YJ and shipped to 92008? Thanks.

TJ front replacement (DA44-3010-E) to be use with JK R&P gears and ARB157?
Free ship to NY12919?

Could I have the price on a pro rock 44 (complete with outers) with 5.13 gears, chromo shafts, an ARB and set up for 5 on 5.5 to go into a YJ and shipped to 92008? Thanks.

I would have to spec one out and let you know. The issue is the 5x5.5 is not available on the PRO Rock 44, unless they added something to their stables after last weds. When I spoke to Dan last about this product for a CJ/YJ, we concluded that the customers would be better off going to a D60 front because, the "Pro44" not Pro Rock, is going to be more expensive to build. I can get back to you later today. What size lift are you running?

Thank you!


TJ front replacement (DA44-3010-E) to be use with JK R&P gears and ARB157?
Free ship to NY12919?

That part number would actually be DA44-3010-H and yes, free shipping. However, I do not want to pay to get you an axle either. ;) Did you want me to supply you with a set of gears and the locker separately or include them in the assembly? Shoot me a PM.

Thank you guys!

I am very grateful for your business.

Allen

Empty JK housing to 92211.
Thanks!

What would it take to get a housing you could put in a cj?

Empty JK housing to 92211.
Thanks!

$2212.16 shipped with CA tax. Includes: housing (for either TruLok or after market lockers), Nodular iron cover, carrier caps, factory ball joints, and JK brackets installed.

PM me your name, billing and shipping address, phone number, email address (for PDF receipt) to order. I will call you for CC info.

Thank you very much. I am truly grateful for your business.

Namaste,

Allen

Any ideas on a CJ housing?

Any ideas on a CJ housing?

Do you want spring pads and shock mounts?

Allen

I know some of you want to swap the front out for something with a little more clearance and stregnth. PM or post with your specs.