|
Aggro 10-13-2002, 10:29 AM What is the best intake manifold for low end torque? Options: 1: oem 1979 aluminum 2: edeljunk performer aluminum 3: edeljunk sp2-p aluminum Going on a 70 350 in a trail rig. Thanks! Mutt 10-13-2002, 10:37 AM As far as I ever knew, the best intake for making torque was a dual plane SCOTTS_4X 10-13-2002, 10:58 AM yeah dual plane is going to be your best bet for low end torque. -Scott 4x4man 10-13-2002, 01:25 PM ive always ran the elderbrock performer,(not the peformer RPM),,,in lots of trail rigs with great results. best intake for 115 bucks that you can get IMHO YellowSub1962 10-13-2002, 02:17 PM I had a Weiand and loved the torque over the stock one it replaced, but I have not heard anything bad about the edelbrocks either.... :usa: WhiskeyTango 10-13-2002, 04:12 PM I've run w/ 2 different RPM intakes on small blocks in cars, they were great but probably not worth the higher power band in a wheeler, I would think the Weiand would be best, but the Performer is cheaper and you probably wouldn't notice the difference on a sub-5,000rpm mill | |