that's right, we're going to host another swap meet. last year turned out really well although we filled up the parking lot at our complex pretty quickly so the location has been moved to a buddy chip's shop/yard. much bigger area and a lot easier to get in and out of. should be enough room for 100 cruisers plus.........

date: may 8th 2010
time: 9am to 2pm
location: 4932 waterloo road stockton CA ( 3/4 mile east of hwy 99 on right )
price: $10 per spot; 50/50 cash raffle, the rest goes to the land owner
attendance fee: freebie
food: we'll have a caterer/roachcoach on hand, lotsa junkfood within 1/2 mile
pets: NO
kids: only if they're supervised by an adult AT ALL TIMES!!!!!!!
show-n-shine: sure, so bring your cruisers!!!!!!! we'll come up with a prize.....

so dig up your old parts, load them in your cruiser and show up. might as well crack open your piggy bank wile you're at it. a few vendors have been invited and will be te the event as well.

please keep in mind that this event will be hosted on a friends property. he has invited us to have the swap meet there. i have a ton of respect for chip so let's make sure we behave accordingly, clean up after ourselves,......you get the point.

hope to see you there!!!!!!!

georg @ valley hybrids

bring your RC crawlers too. I will have a course set up.

Mmmmm... swap-meet :homer:

:bounce2::bounce2: looking forward to it !!!

can i pre-pay for my spot now, really looking forward to it :D

Hey G maybe I should bring this basket case down there. Unyless you wanna come grab it sometime before......

we got more than enough room kevin..........:grinpimp:

Hey G maybe I should bring this basket case down there. Unyless you wanna come grab it sometime before......

that would be sweet! thanks jamie.

I'll be there. I still have my rear 9", 3 speed tcase, and toybox sitting on the floor in my garage. I should have the 1 ton swap complete and all dialed in too.

Anyone interested in a running 283?

It is time to pass on my 40's hard top, sides and hatch(not a tailgate) to someone that will actually use it. It has been sitting in my yard for the past 10 years. Good shape though, but no doors.

Also have a huge, 8'x4' rack that came with my 55. A little rusty, but will clean up good, if you have the time sand blast it.

ill be there may be drunk too:homer:

ill be there may be drunk too:homer:

john, you should start drinking 5 minutes before you leave.......:flipoff2:

ill be there may be drunk too:homer:

OK! now we just need rustynuts, something clear in a jar and a golfcart!:laughing:

oh no its pismo allover again :laughing:OK! now we just need rustynuts, something clear in a jar and a golfcart!:laughing:

does that mean we'll have to invite a few fgaycruisers?

OK! now we just need rustynuts, something clear in a jar and a golfcart!:laughing:

I have a golf cart... :homer:

I got a rear axle complete with a killer FC ladder bar on it, some metal half doors and a metaltech/FC family cage for a 40 :smokin:

:lmao: F no! real cruisers only does that mean we'll have to invite a few fgaycruisers?

i might be able to come up with some thing clear and hopefully be bringing a burb for sale, is there a car coral price

Save me a spot Georg, next to Marlin if you can!

I have a question...
I have some small random crap that Id like to sell, would I need to SPOT for that?
Dont wanna take up space for others that have more useful stuff, but it'd be cool to get some of this crap outta the garage too.
Mostly just small miscellaneous parts.

Just curious.

Keith

looks like i'll be dragging out an M101 trailer to sell for a freind.

i got a tub with no real rust i could drag down if somone is intereted in it
http://i51.photobucket.com/albums/f384/norcalzook/cruisers002.jpg

Any Mini Toy stuff allowed??

i got a tub with no real rust i could drag down if somone is intereted in it
http://i51.photobucket.com/albums/f384/norcalzook/cruisers002.jpg

Id be interested in some of the shit off it!?:D

i want no need that tailgate.

Any Mini Toy stuff allowed??

allowed? that's funny dude. bring it! :homer:

We'll be there:D

I'll be there with Ruff Stuff but bringing lots o parts. Looking for fj55 usual dash parts and an a/c reostat(sp) temp adjusting switch for a friends 70 55

I can bring f cylinder head "60050" 73 fj40 and rocker arms.Head has valve job and has new head gasket set.I have some new air tools Ingersol Rand and C P half off list.Also load up a few crusier parts and tools.Sell , trade , barter.Need parts to install power steering in FJ40.

My daughter's track championships are on that day, so I won't make it...

:D

IN! Thanks for the chance Georg. :flipoff2: TTT for the one eye bastid

Anyone looking for big parts?
-Built narrowed 60 front (ARB, 5.13, RCV or 4340 shafts, Reid knuckles)
-Built 14 bolt (shaved, ARB, 5.13, crush sleeve elim.)
-Built th700R4, pretty much everything possible is in it, Art Carr shifter
-550 hp roller 383 sroker w/ 0 min
-(5) 42" PBR's on Racelines
-Atlas 4spd
-Ron Davis cruiser radiator
-4 seater chassis with 1970 VIN and reg.
-Mass-flo engine management for a chevy 350 (400-550 hp)
-(4) New FOA 2.5" x 4" bumps
-other smaller stuff; coolers, fuel cell, center console, speaker storage boxes, jerry cans and mounts, Tfab hood, new black magic fan
-Big beefy links with currie rod ends
- (4) 18 x 10 * lug tow rig wheels with tires
-(4) 16 x 10 5 lug wheels
-Fj40 Best top
-4 bolt chevy shortblock .030 over with flat tops, Al timing cover and oil pan. 150-160 psi in all cylinders prior to tear down

Yeah, parting the project. We're going to be taking some time in a few months and traveling the country for a year or so...don't need all of this here collecting dust. I want to put together a FJ80 for expedition travel. I'll have prices up in a for sale add shortly. None of this was cheap, so don't expect it to sell cheap. I'm not hurting for money, but will not have the time or drive to finish it :( It's a lot of stuff to load up, haul to stockton and then bring back. If someone is interested, PM me

For sale post: http://www.pirate4x4.com/forum/showthread.php?p=11354088#post11354088

Anyone looking for big parts?
-Built narrowed 60 front (ARB, 5.13, RCV or 4340 shafts, Reid knuckles)
-Built 14 bolt (shaved, ARB, 5.13, crush sleeve elim.)
-Built th700R4, pretty much everything possible is in it, Art Carr shifter
-550 hp roller 383 sroker w/ 0 min
-(5) 42" PBR's on Racelines
-Atlas 4spd
-Ron Davis cruiser radiator
-4 seater chassis with 1970 VIN and reg.
-Mass-flo engine management for a chevy 350 (400-550 hp)
-8274 w/ synthetic line
-(2)New FOA 2.5" x 16" co's with triple rate hardware and all upgrades
-(4) New FOA 2.5" x 4" bumps
-other smaller stuff; coolers, fuel cell, center console, speaker storage boxes, jerry cans and mounts, Tfab hood, new black magic fan
-Big beefy links with currie rod ends

Yeah, parting the project. We're going to be taking some time in a few months and traveling the country for a year or so...don't need all of this here collecting dust. I want to put together a FJ80 for expedition travel. I'll have prices up in a for sale add shortly. None of this was cheap, so don't expect it to sell cheap. I'm not hurting for money, but will not have the time or drive to finish it :( It's a lot of stuff to load up, haul to stockton and then bring back. If someone is interested, PM me

damnit jeremy!!!! gimme pricing on the axles and the air bumps please

i have an ARB front winch bumper for sale its currently on an 04 tacoma and is bolt on

i got a tub with no real rust i could drag down if somone is intereted in it
http://i51.photobucket.com/albums/f384/norcalzook/cruisers002.jpg

Give me a yel on the tub if you still have it...

i have an ARB front winch bumper for sale its currently on an 04 tacoma and is bolt on

Price?
Pics?

Misc 40 Parts

--------------------------------------------------------------------------------

I am going to drag this stuff up to the Stockton Swap Meet next week. I also have some misc stuff here are some of the prices,
82 J40 4speed trans w/tcase front & rear driveshafts & crossmember
4 speed trans
45 non removeable hard top Lid
bug catcher doors
smog header
rear carrier box of misc lights and lenses and what ever else I can throw in the back of the truck by next Thursday if your looking for anything special let me know I might have it and could bring it. See ya there

Give me a yel on the tub if you still have it...

that appears to be a oem soft top tub. and sputnik40 is selling a oem soft top.

i have two 8 lug 14 bolt chevy full float hubs and rotars for sale if someone wants em im comin down with the knorrs

i have two 8 lug 14 bolt chevy full float hubs and rotars for sale if someone wants em im comin down with the knorrs. im looking for an fj40 tank and early 70's wiper arms

I have a good 40 tank I could bring down. From about 1971.

Would be interested in a dinged up FJ40 hood, bib and cowl section

I have a good 40 tank I could bring down. From about 1971.

do you have straps for it any pics. how much

I have a dinged hood, I think I have a bib, no cowl.

No tank straps. $90 for a good tank, no rust.

I also have a couple tops if anyone's interested. I'm not going to haul them unless I have a tentative deal. '71 and a '75. $250 and $450 respectively.

Anyone looking for big parts?
-Built narrowed 60 front (ARB, 5.13, RCV or 4340 shafts, Reid knuckles)
-Built 14 bolt (shaved, ARB, 5.13, crush sleeve elim.)
-Built th700R4, pretty much everything possible is in it, Art Carr shifter
-550 hp roller 383 sroker w/ 0 min
-(5) 42" PBR's on Racelines
-Atlas 4spd
-Ron Davis cruiser radiator
-4 seater chassis with 1970 VIN and reg.
-Mass-flo engine management for a chevy 350 (400-550 hp)
-(4) New FOA 2.5" x 4" bumps
-other smaller stuff; coolers, fuel cell, center console, speaker storage boxes, jerry cans and mounts, Tfab hood, new black magic fan
-Big beefy links with currie rod ends
- (4) 18 x 10 * lug tow rig wheels with tires
-(4) 16 x 10 5 lug wheels
-Fj40 Best top
-4 bolt chevy shortblock .030 over with flat tops, Al timing cover and oil pan. 150-160 psi in all cylinders prior to tear down

Yeah, parting the project. We're going to be taking some time in a few months and traveling the country for a year or so...don't need all of this here collecting dust. I want to put together a FJ80 for expedition travel. I'll have prices up in a for sale add shortly. None of this was cheap, so don't expect it to sell cheap. I'm not hurting for money, but will not have the time or drive to finish it :( It's a lot of stuff to load up, haul to stockton and then bring back. If someone is interested, PM me

For sale post: http://www.pirate4x4.com/forum/showthread.php?p=11354088#post11354088

Im in the market for a fuel cell!!!!
Will have some Misc. parts for 40 and 60 series.

40 seats (bad covers)
SOR dash cover
stock roll bar
front bumper
rear bumper
some rod ends
t bird e fan
air cleaner unit
gas tank
40 seat brackets

bunch of weird crap that I need to get out of the garage!

Cant wait!

Keith

Would be interested in a dinged up FJ40 hood, bib and cowl section

Dinged up :grinpimp: No Problem let me know and its on the trailer. I have a cowl and bib

Dinged up :grinpimp: No Problem let me know and its on the trailer. I have a cowl and bib

pics to onmylid@aol.com

I have a dinged hood, I think I have a bib, no cowl.

No tank straps. $90 for a good tank, no rust.

I also have a couple tops if anyone's interested. I'm not going to haul them unless I have a tentative deal. '71 and a '75. $250 and $450 respectively.
Which one is which? I could use one, need some regular doors also. Want any trades?

I could use a pre '75 frame if it has paperwork....Anyone?

Which one is which? I could use one, need some regular doors also. Want any trades?

Are you saying you have some doors ? What are you looking for ?

Blue one is a ~'71 or so, red a 75. I do have a real nice set of '71 doors.

Blue one is a ~'71 or so, red a 75. I do have a real nice set of '71 doors.

Interested in the doors. Can you call me or pm a price Rob 909 7318001

Dan asked first, let me see what he wants. Specter's asking $320 a piece and I normally price my tuff at half of Marv's but that seems nuts. How 'bout $250 for the pair? Here's the pics. The rubber's kinda crusty and the felts could get replaced but there's no rust, they're pretty straight and everything works.


Doors are gone!

Dan asked first, let me see what he wants. Specter's asking $320 a piece and I normally price my tuff at half of Marv's but that seems nuts. How 'bout $250 for the pair? I'll take some pictures later.

Pictures would be great let me know if Dan passes

Which one is which? I could use one, need some regular doors also. Want any trades?you're going to go home with a full cruiser..lol

Loading up the trailer today and leaving tommorow if you all sell anything to anyone east of LA I can haul to down, See ya there ! again anyone looking for anything else post up and I will do somemore diggiing. I really dont want to bring anything home I can see my back yard again

Hey Kent what is under that blue tarp in the upper left of your 2nd door pic?

Gordon's 40.

Hey Kent, How much for the Gradall?:flipoff2:

I'm thinkin' $15K would do it. way less than I paid, but that's about market.

You like that picture, huh Ken?

I'm gonna hve to be more careful with my backgrounds with this crowd.

were the hell you going to park that? your yard is FULL :DHey Kent, How much for the Gradall?:flipoff2:

I'm looking for a choke cable with knob for a 65 FJ40. Also would like to find a front bib with the marker lights. Anyone have one of these?

I need some sacrifical top sides to make a 45 top, anyone got the sides alone?

Thanks for coming buy Kent, I will take that top too with the ambulance doors but this time I will come to you...

were the hell you going to park that? your yard is FULL :D

I need something to move all my shait around!! :laughing:

I need some sacrifical top sides to make a 45 top, anyone got the sides alone?

I got you covered Dan!! Just got to throw them in the truck. With you, trades would work nicely!

I'm looking for a choke cable with knob for a 65 FJ40. Also would like to find a front bib with the marker lights. Anyone have one of these?how about a choke outta a 66?

i have two 8 lug 14 bolt chevy full float hubs and rotars for sale if someone wants em im comin down with the knorrs

I'll probably take them

anyone need a 15 in 8 lug spare?

anyone need an ARB winch bumper for a tacoma? i could bring it up...its about $810 new from slee(plus shipping/tax/whatever), id like to get $500 out of it

how about a choke outta a 66?

That should do the trick. How much?

PM'ed you

IF anyone needs anything brought back to the Fresno/VIsalia/Lemoore area, let Georg know and I can bring back parts and swag for people on my way home.

just kidding i sold it to day.looks like i'll be dragging out an M101 trailer to sell for a freind.

Where is Stockton again:D:D, somewhere in Mexico???:flipoff2:

Close to Messico! :rolleyes:

Ca-mexico same thing!

anyone need an ARB winch bumper for a tacoma? i could bring it up...its about $810 new from slee(plus shipping/tax/whatever), id like to get $500 out of it

Need? no.

Want? yeah maybe a little

Afford? wouldn't be exactly what you'd "like" to get out of it.

ca-mexico same thing!

x2

Just wanted to say a big thanks to Georg for organizing this and his buddy Chip for providing the space. Had a blast and had the opportunity to see some folks I hadnt seen in a while. Brought some of my junk to sell...made a couple bucks, and then promptly spent it and then some.
Its like a friggin candy store for cruiser guyz! Seemed that most everyone there was trying to get rid of the same crap that I was...theirs didnt sell either. However, I DID find some kick vents that I desperately needed!
Also found someone who is making seat cradles too!

Great day, great people!

Seat cradles for a 40? Any details?

Seat cradles for a 40? Any details?


Bill,
He's a guy over on Mud board goes by the name "cummins cruiser".
He bends em up out of tube pretty much to what ever dimensions you want and sends em as a weld together kit for about 170 bucks. Pretty good deal IMO, and its time that I save myself from having to make em.

Check em out.

Keith