Should I use heims or bigger tie rod ends?

I've seen the "Dodge Truck tie rod ends" mentioned... What size are they?

tie rod ends, the es150's are a 3/4 fine thread, taper is smaller than a stock chevy tie rod, but quite a bit larger than a stock jeep end.

I'm looking to getting DOM tube w/ 3/4 x 16 threaded ends... seems common for heims.

Is that the same thread for the ES 150's?

I'm thinking that w/ those TRE's tho, I'd have to drill out the knuckle on a Dana 30. True?

MOOG ES2847R and
MOOG ES2848L

Off a ramcharger or some shite. Much bigger and no mods to the knuckle or drag link are required.

Heims for steering...........no thanks.
Cord

Sweet...
Thanks, CORD318, that's what I'm lookin' fer. Any idea of the price?
:D

Here is one way to do it: http://www.vintagebronco.com/newberry/pages/tech/tre/tre.html
Each tie rod end costs about $25 from autozone. Parts are from 85 blazer.

They run about $40 a piece around here. Those numbers match up to most companies rod ends, but MOOG are the best.

Around $25 each if memory serves.
Cord