Going out on a limb here and wondering if anyone knows of someone or some shop near San Diego that has a Torchmate table? I would really like to get a cover made for my graphic design portfolio made from aluminum and etched with my nameplate/logo. This job would be very very simple. Ideally I would like to meet up with the person/shop, but I could just send a PDF of the requested design to have etched and cut out, then shipped to me. I also don't have a ton of $cash$ so thats why I'm asking on here. Please let me know. Thanks guys

post up or PM me if you have any suggestions.

Going out on a limb here and wondering if anyone knows of someone or some shop near San Diego that has a Torchmate table? I would really like to get a cover made for my graphic design portfolio made from aluminum and etched with my nameplate/logo. This job would be very very simple. Ideally I would like to meet up with the person/shop, but I could just send a PDF of the requested design to have etched and cut out, then shipped to me. I also don't have a ton of $cash$ so thats why I'm asking on here. Please let me know. Thanks guys

post up or PM me if you have any suggestions.

Look for a waterjet, their is one right by my house, as for the engraving give me a call. I have a full engraver at my work. Send over the PDF so I can see if my guys are able to engrave what you need.

done, thanks Mike

done, thanks Mike

Hey you are supposed to be out at JV, whats the deal? Also if you are, make sure you :flipoff2: Flatblack out there and tell him I want my plasma cutter back so I can boatside my Jeep before I leave :( in 25 days for 7 months to Iraq!

Just in case this subject comes up again, Dallas at SFR in Escondido has a Torchmate Plasma Table with a digital engraver on it. www.stinkyfab.com

Thanks Dustin,

Dallas was actually the first person I contacted. He was busy with getting the electrical stuff hooked up in his new shop. Thanks