Hey guys

I cut my front fenders for the flattie look, got the flares off now and trying to decide where to cut. Could you please post pics of what you have done, and I would still like to drive it on the street so I don't think Ill be dove tailing it.

My junk

97 tj 6cyl
36" tsl's
5.5" rubiconxpress long arm
stock wheelbase for now


thnx for the help

Here's a pic of the corners I just cut from Savvy.

I hope I don't get slammed for posting up to your not so hardcore request.:laughing:

The search button will find 1000's of comp cut pics.

http://i10.photobucket.com/albums/a126/mike4089/oneton021.jpg

http://img.photobucket.com/albums/v356/Bryanwhitaker/Snow%20Wheeling%20placerville/IMG_1249.jpg
http://img.photobucket.com/albums/v356/Bryanwhitaker/Snow%20Wheeling%20placerville/IMG_1258.jpg

G.C. Bandit I have always like the simplicty yet perfection of your rig. :grinpimp:

http://i10.photobucket.com/albums/a126/mike4089/oneton021.jpg

Your rear tire is on backwards.

Hurley,

Lets see pics from the back. Did you cut blanks? How much rear stretch?

It is about 8in back and yes they are blanks from Savvy. I took the rear wheels off and put a string on a sharpie 1/2 the dia of the tire size and marked it. Then cut the hole.

Hurley looks good. What LEDs are those and did you make that rear crossmember/bumper? If so what did you use if not where did you get it? How are you going to finish the corners polish them out?

The LEDs are off ebay. Like $40 for both. The rear crossmember is from Genright.
Yes I have started to polish the fenders, rockers and front bumper. Pain the ass but with jeep painted black now I think it will turn out nice.

The LEDs are off ebay. Like $40 for both. The rear crossmember is from Genright.
Yes I have started to polish the fenders, rockers and front bumper. Pain the ass but with jeep painted black now I think it will turn out nice.

Cool. Ive thought about what to do when and if I go to aluminum armor and figure I'll get a Mothers Powerball to polish it out.

The aluminum is sweet. I bet I have dropped 120lbs. I started with a sander and will be using a Mothers ball on it. I will post up a few pics when they are done.

G.C. Bandit I have always like the simplicty yet perfection of your rig. :grinpimp:

Thanks. Cant get to crazy working in the dirt, with a welder and grinder. I finally now have a garage!:D

Thanks guys (Hurley, thats EXACTLY what i want mine to end up like, the back is perfect., not too much cut out)

Im gonna leave my stock sheetmetal for now and just start cutting, but the aluminum is a awesome idea.

can i get a close up of the front end, is that a custom tube job you did?