|
DSI 10-17-2002, 12:39 PM i've got hte complete ARB harness etc etc etc... i've got the compressor and the rear locker (locker1) hooked up but don't know the color to number codeing of teh front (locker2) and i got a guy coming to test drive my runner in an hour! HELP ME PLEASE :D Scout Dude 10-17-2002, 12:43 PM Well, in the movies, it's always the red wire...no, wait, I mean Blue...nope, that's not right, I mean red! Cut the red wire!:flipoff2: StinkBug 10-17-2002, 01:14 PM i just looked at my rear switch and copied the colors, there are only one or 2 different and i just used a little common sense. as i remember the 2 blacks are on top, the blue and white is the bottom right and the other 2 i have no clue, tho i wanna say yellow bottom left, i could be totally off on that tho, not even sure a yellow is involved. forget it, just ignore me and call ARB. :flipoff2: Dallas Dan-H 10-17-2002, 01:44 PM I didn't use any of the harness or compressor, but I scanned a couple of pages of the ARB install sheets a while back. it should help a little. http://community.webshots.com/album/30445925MbFTFDJDcJ - Dan The Jerk 10-17-2002, 01:47 PM if the rear one works, just plug in the wires the same way on teh front switch and i belive one is yellow and one is red or blue goes in teh sam spot as teh rea rone. :-) jiMMy | |