Who in thew name of God makes a performance programmer for this. There isn't a place for a chip but you can download a program through the OBDII port. Just where do I buy it.

Tim

I should add that I checked the usual suspects like Jet (has something but cant get on the phone with them), superchip, Pro-tech, etc.

I don't have the link but there is a "Cadero" buletin board of guys who put these motors in fierros. Some guys on there really have that stuff figured out, even making it work with turbos and stuff. Some sandrail guys have it figured out too, but they aren't online, as far as I know.

Get a hold of Ed Wright...

918-446-3019

www.fastchip.com

If you don't see something here just ask,
we probably have done the program for an application like yours.

Had him put a custom program in my Formula and was VERY happy.

The high zoot sand/desert car guys will know who deals with these. These motors are the "hot set up" right now. If you went to the Sand Sport Show or the Off-Road Expo in the last month you'll know what I mean. Twin turbo'd Northstars were everywhere. There were several vendors selling turn key twin turbo setups and even more selling dressup/hop up items.

Jason :)

ive talked to a couple guys, but as far as like the sts is concerned, they claim that unless ALOT of eng work is done, there's not much they can do to hop up the computer, but they can do stuff like remove the vats programing, high speed fuel cutoff etc..
as far as boosted aplications go, the computer if i remember corectly is similer to a ls1, ls6 etc and you can run up to about 8 psi on stock programing, past that i belive its just a mater of changing to a grand-nat map sensor..

www.chrfab.com

They have a few different options.

Now if only I can find a way to have a rear sump oil pan....