In the last few months it seems we have not been selling nearly as many gears, lockers, and Install kits that are not going in a custom axles. We can do about any custom axle and have the parts available to do them, but we have an enormous amount of Gears Lockers and Install kits in our wharehouse in NC. Which means there is no middle man, a tracking # can be provided on the spot, and accurate ship times are met.

We specialize in Offoad parts so our inventory is this: whats listed is absolutely in stock at all times unless there is a complete national backorder and we will buy out other vendors to insure we have it

GM 14 bolt:
All ratio 14 bolt from 3.73 through 5.38T
All master install kits no matter year
Mini Spool
Full Spool
Detroit Locker
Grizzly Locker
ARB - RD114
1350 u-Bolt Yokes

Dana 60:
All ratios from 3.55-538 Both regular rotation and Standard rotation
Master install kits
King pin Kits w/ a Tool to remove
Wheel Bearing Kits front and rear
Spools - 3 series, 4 series 30 and 35 spline
Warn Hubs
Drive flanges
All chromo axle shafts
Ujoints- Spicer 806x and 300m Joints
Detroits 3 series and 4 series
ARB's
Lockrights
Spindles
Spindles Bearings
ARP studs
Spindle Nuts to hold wheel bearing
Spindle studs and nuts

Dana 44:
All Ratios Thick and Thin reverse and non
All master install kits HD, D44a, Rubicon, JK, front and rear
All axle shaft Kits- front and rear - need custom blanks ready to be splined
Spindle bearings
Spindle Nuts
Grizzly lockers
Lockrights
Spartans
Warn Hubs
Spools
Carriers
Spider gears

Dana 30:
All ratios TJ, High Pinion, CJ, ZJ,
All master kits
All axle shafts- 30 spline no problem
ARB
Detroit
Spartan
Carrier

Ford 8.8:
All ratio's
Master install kit
Adapter flanges 1310/ 1330
1350 yoke
TJ weld on brackets
ZJ weld on brackets
YJ weld on brackets
TJ ebrake cables
Brakes We got 8.8 brakes
Lockrights
Detroits
Mini spools
Full spools
Rear shafts
C-clip eliminator kits
Clutch pack rebuild kits

Toyota 8", 8" V6, T100, 8"clamshel, 7.5 clamshell, landcrusier:We ship assembled 3rds w/ 5 year warranties
Every gear ratio
all master kits
All yokes
ARB
Detroits
Spartan
Lockrights
Axle shafts rears, front mini's fj 40, 60 , 80's



These are the biggest sellers and what we do the most of in house. If price is the issue call me well match and beat anything thats not losing money. all these parts are in stock and we install daily so you need tech support not a problem I have 2 installers plus myself that see stuff day in and day out.


Warranties we handle all the warranty claims on products we sell unless other wise mentioned. We can touch the stuff we sell and ship same day if ordered before 4pm eastern standard, On the west coast thats fine we have small wharehouse on the west coast that has many of the same products but not the qty and can still ship you parts with 2-3 days max no matter where you are in the country. And we use USPS for smalller packages that can ship cross country in 2 days.

Its hard for us to answer all posts in threads, much better at PM's and even better at email where we can provide you with a detailed exact estimate that is saved so if your not ready to order you can call back with the estimate # when you are ready. Or even better Call us we answer the phone 8am-6:30PM Mon-Fri. And communicate via email on the weekends chase@eastcoastgearsupply.com
919-672-2705

Hi.I have a 2wd pulling truck and am looking for some low gears for corp 14 bolt,I read your ad and it say's 5:38 is deepest,is that as deep as you can go?I was thinking of 6:11 for gears as I am running 5:11 now and it's not quite enough

yes 5.38 is as deep as you can go on the corporate 14 bolt

price for

dana 70hd : 4.56 ring and pinion
master install kit

Gm 14 bolt: master install kit.

price on d60 front master install kit to 35805 thanks

ARB for 79 model ford 60 front to accept factory 4.10 gears shipped to 26582. I guess ill also need the compressor and whatever other hardware the arb takes.

Price for:
- 5.38 D60 LP with master install
- Front wheel bearing kit for Chevy LP 60
Also, can you get 35 spline front spindle needle bearings? New to the 60 stuff... But I'm told it's a stock 70 front part. Thanks!

toyota 8" ARB air locker and detroit locker both are v6 shipped to 94070

lots of good stuff

could i get a quote for 14 bolt gears thick 5.13s and install kit shipped to
beachwood,nj 08722

thanks

price breakdown for 79' 14 bolt 5.38 gears an ARB and master install kit shipped to 85379

May I have two quotes on two sets of 3.73 gears and master install kits for 10 bolt F/R axles (87 Chevy K10) shipped to 03103 please.

Price for D44 thin low pinion 5.13, 5.38, 5.89 to 91350 - I have not picked the ratio yet but will be buying two sets for my jeep - Thanks

Ok....
Hp D30 Reverse Rotation 4.88 gears and master setup
D44 thin cut 4.88 gears and master setup
Grizzly locker for the D44
Shipped to 14086. Nitro gears if you got em'!

Chevy dana 60 5.13's and install kit. Install kit only for Dana 70hd. All shipped to 76028.

Thanks!

ford hp d 60 yakun gear set reverse cut 5:38 including master kit. rear sterlin 10.5 yakun gear set and master instalation kit 5:38 to 91316

Price for 79 HP Ford D60 Front to WA 98281.
ARB
5.38 Yukon Gears
Master install kit.

Price on a 4.88 thick and install kit for a 14 bolt to 98166. It's a late 70's axle.

ARB for 14bolt (4.10 and down) and master install kit shipped to 80524

14 Bolt detroit and ARB price, 14 bolt master install kit. 93 Dodge D60 LP 538's w/master install kit and ARB

85224

Thanks

price on 5.38 reverse thick for a dana 60 and one install kit, and a long side 78-79 dana 60 shaft just inner to Maine 04350, thanks

Need a quote on

14 bolt 4.56 gears
-detriot locker
-MASTER INTALL

dana 60 front
-4.56 gears
MASTER INSTALL

detriot locker for dana 70

shipped to 45805

PM's sent Feel free to call 919-672-2705 tons of stock for fast ship times

thanks for the awesome deal! will def pass on the good word

4.88s, install kits, arb rd90, and large arb compressor for 01 toyota v6 w E locker.

Thanks!

Edit: Actually, maybe the assembled clamshell and 3rd is the way I want to go. No core charge, as I'll have to send mine back after new ones are installed. Zip code is 68801.

4.88s with install kits. 1 open carrier and spartan locker for rear. 2005 tj rubicon dana 44s shipped to 92234. Thanks

D60 king pin kits
D60 5.38 Rev Thick
D60 master kit
14 bolt 5.38 Thick
14 bolt master kit

Toy V6 Zip locker to 96734.

quote for 5.13 gears for 14 bolt and hd dana 44. master install kits for both and add in the cost of a detriot locker for the rear. shipping to 94531

Quote please,

Gears for 1989 Ford Bronco, Dana 44 reverse cut for front, and ford 8.8 for rear.


Looking for 4.56 gears for both axles, master install kits for both, and a new carrier for the dana 44, shipped to 95126, ty

Need a price on a Spartan D60 35 spline and a Lock-Right for same. What is your recomendation between the two? I am not ready to re-gear and therefore do not want to change carriers, but want a locker during the shake down/gear evaluation period. Will these hold up for a while in a full size, 42's, with a big block? To 53529

Thanks, Scott

Price for 2 spartan 8" Toyota lockers to 35235 please.

need a price for detroit locker 14bolt full float to 80212 thanks

Quote for Dana 30, 30 spline- ezlocker, or Aussie, or a powertrax. To 76023.

Thanks


Posted by my iPhone! :cool:

79 Ford Dana 60 front
4.56 gears
install kit
Full ARB setup
02771

looking for a price on 1978-79 ford hp dana 60 4:88 gears rear dana 60 4:88 gears.

a selectable locker for a hp dana 60 (not sure what i want yet)

plus left and right inner and 35 spline outter axle shafts and a good u-joint

Could i get a qoute for a Dana 60 35 spline spool for a 5.38 shipped to 61284

thanks

Price on a 10.5 4.10 gear set and master install kit. Thanks

Price on ARB RD90 locker to 07036

2- 5.29 and install kits for toyota 8" E-locker shipped to 93004

d30 spartan locker
4340 27 spline chromoly shafts (what brand- ten factory or superior?)
to 20155

thanks

how much for a toyota 8" 4cyl with 5.29 gears and arb lockers

tons of diff parts ready to ship

do you have anything along the lines of spartan or lockright for chrysler 8.25?

Price check, aisle 6.....

Detroit for Toyota Land Cruiser

thansk

john

price for 2 toyota 8" v6 lock rights shipped to 03276. Thanks.

looking for the following for a pair of d44 scout II axles:

5.13 gears x2
master install kits x2
spartan lockers x2

all shipped to 98201

5.29s 2 sets and mas ter install kits toyota truck 1984 8 inch to 98936

PM's sent

can you get custom size Toyota chromoly rear axle shafts? these are for a HJ75 LandCruiser pickup... semi floating, 30 splines 21" short shaft, 33" long shaft... 6 on 5.5" bolt pattern.

D60 5.38 for chevy kingpin 60
D60 master kit
D60 Detroit locker
14 bolt 5.38 Thick
14 bolt master kit - old style (not slip on drums)

Shipped to 04093

detroit locker for toyota v6 rear
shipped to 27317

-mike.

Price on 5.13 gears for 9" Big bearing and Dana 44 HP shipped to 95632

Thanks

Sent some PM's best to PM me as its hard to get on here poke around throught the threads. Can also email chase@eastcoastgearsupply.com

ARBRD167 D60 35spl 4.10 down shipped to 30248

14 BOLT full spool, master install kit for 10.5 / 4.56 gear
Dana 44 master install kit
to 93065

aussie toyota 8" 4 cyl. locker to 95623, thanks.

price on waggy d44 4.56 r&p, carrier, and install kit to 95717

Price on 5.38 r&P with install kits and carrier/spool for D60 rear and HP60 front to 97045 thanks!

Quote for Waggy 44 front
ARB
yukon zip
OX locker
compressor
4.56 gears
front master install kit
Thanks

Looking for 4.88 gears and install kits for front and rear scoutt II dana 44 axles. Along with a yukon zip locker. How much shipped to 98201?

Price for: Super 88 kit
Ox-locker for 8.8
Detroit Locker for 8.8

Lots of parts in stock and ready to ship.
Please send PM with full name and email address. or emial me at chase@eastcoastgearsupply.com for quotes

Can I get a quote for 4.88's front and rear with install kits for a 1990 toyota 4cyl shipped to a business 85032.

Thanks!

Need 4.88 gears, install kits, and carriers for an 89 Cherokee. Hp30 front Dana 35 rear. Shipped to 95363

can I get a price for a Detroit locker for an 8.8 31spline, shipped to 79935 ?
Do you carry OX lockers for 8.8's?

Dana 60 5.38 Gears Standard
Dana 60 Spool
Dana 60 Install Kit

(1983 GMC)

82007

Tons of parts at great prices, but please call 919-672-2705, email - chase@eastcoastgearsupply.com


You can PM but email is much easier for tracking and it is next ot impossible to keep up with individual threads.


Overstocked on Rockwell Griz, D60 Griz. Ford 8.8 - 4.56, 4.88. Dana 60 5.38, GM14T-4.88T, GM14T-513T , Dana 60 spools all flavors. tons of chromoly shafts

quote on 5.38 thick gears to fit 79ford hp 60 and 78 gm 14 bolt 10.5" shipped to 44662 :D

need a quote for wagoneer 44 5.13s and ford 8.8 5.13s with master installs to 95237 thanks!

Front GM dana 60 5.13 gears and master install kit ( and a detroit locker)

And a set of 5.13's and master install kit for GM 14Bolt( and a detroit locker) ...

all shipped to 79118...Please list the prices for each item..Thanks!

Price for a set of lockouts for Dana 60

sent you an email for 1986 ford front hi pinion dana 60:

ARB
5.13 ring & pinion
master install kit

chris

price on gm dana 60 front 538 ring and pinion also 14 bolt ring and pinion 456 and 538 thanks

D44 front ttb and ford 8.8 rear 4.88 and install kits to 30102

14 bolt ARB with 5.38 gears (thick), master install, and Reverse cut D60 5.38 gears (thick) with master install, and a 14 bolt 1350 ubolt yoke. Shipped to 44615. Thanks

toyota 8'' spartan locker shipped to 97321

need a price qoute for
Ford Dana 60 HP:

5.38 Reverse R&P for 4.10 up Carrier
Master Install kit

Can I get a quote on 4.88 thick R&P, standard rotation for a d60, plus a master install kit, and a 4.88 R&P for a d70hd, plus a master install kit, shipped to 16066.

Thank you.

toy 8in arb with big compressor to 66547 thanks

compressor kit CKSA12 and CKMA12 shipped to 02771.

Rear D60 standard/ thick 5:38's??? yet to find any...

Spartan shipped to 82601 For 30 spline dana 44

Tons of stock but it hard to answer posts in threads, email chase@eastcoastgearsupply.com or call 919-672-2705.

price on lock right for sterling 10.25 shipped to 80923.

How much for a set of 5.13's for a 14 bolt, and thick cut reverse rotation dana 44, with install kits, shipped to 98010?

hi price on a spartan for a 8" toyota 4cyl shipped to 95382 thanks

can I get a quote on 5.38 thick cut gears for a HP d60 and a 14b(10.5) and and instal kit for the 14b.
shipped to 10941
thanks.

lockrite locker for a dodge dana 60 shipped to 07045

i need a full spool for a 76 bronco dana 44 with 5.13 gears.
shipped to 12804

14 bolt 5.13 gears and master install kit to 84414

Thanks in advance

tons of inventory in stock and ready to ship. Emails or phonecalls are best 919-672-2705 chase@eastcoastgearsupply.com

Price on a dana 60 35 spline spartan locker and/or a price on a set of 5.38 gears for a GM dana 60 to 82435 please

i need 5.29s for 8" and 7.5" with minor install kits with and without a 8" spartan/powertrax ect what ever is cheaper

shipped to 99352

Spartan locker for high pinion dana 30 with 4.56 gears shipped to 40422.

d 44 to 07465 w/ 30 spline and 409`s

Quote for 10.5 14BFF 4.56 gears thick and Detroit locker and install kit for the 14bff. shipped to 53011

PM's sent!

price on 5.13 thick with install kit to 84414