anybodygot any suggestions for a vendor who can build a beefy ass custom tracbar?
my RE is too short. I have the new RE bracket, reamed to 5/8in to fit their older style adj tracbar, with heim end joint.

thanks fellas
~John

Your best bet is to put the axle mount on top of the axle and run a straight tracbar with heims. Skyjacker makes a bracket to move it, but the way a friend did it was with a custom welded mount. The mount has to be real beefy to withstand all the stress put on the front end.

Get yourself a JEGS catalog and look under the Chassis section. They have a complete track bar setup with heim joints for sale for under $100.

thanks man...ive got a jegs, ill check her out.

~John