I am lending my buddy some tires 32x11.5x15 and we fig hed need a bl to make them fit. But cant seem to find a 1" only 2" ones. wahts the deal. Not a big fan of the bl look (bumpers etc)

Doesn anyone make a 1"

Dan

what year? on TTB trucks they should fit with no BL, fullsize straight axle ones fit 33 no problem with no BL

Hockey pucks make a nice 1" body lift....:flipoff2:

1996 eddie baugher

Just trim dude... but if you insist on the body lift you can probably make one out of 3" steel tube. Or I hear that hockey pucks actually work. I need one on my ranger for crossmember and x-case clearance, still doing some research though. I have 3" right now so I might just take those spacers and cut them up.

33's will clear just fine on a fullsize TTB Bronco, you just have to either shim, or trim the front bumper, so 32s should be no problem.

dozernad click on the link below for my page, its a 1996 and no lift.

Check this out.


http://www.offroaddesign.com/catalog/Zero%20Rates.htm

those wont do a damn thing for the front of a bronco, they have coils:confused:

The rear of a bronco will swallow 35's stock, and as i said, 33's will fit and flex with 0 lift.

shim the front bumper out. u can get some longer bolts and some spacers to do that.
for a 1" body lift i went to a metal shop and got a rod of 3" aluminium and had them cut into 1" pieces. then get some bolts that are 1" longer. threw it together and wa-la. after that re-adjust the trans shift linkage, and lift or trim the fan shroud.

4wpw i believe sell 1" lift pucks for like less then $2 each. just need to tell them the size u need. for my bronco it would be 1" tall x 3".

heres a site to give u an idea http://www.2bigbroncos.org/technical/body_lift/index.html

good luck