PDA

: DIY high clearance 60

Ruckus
10-23-2002, 06:14 PM
I attempted to search, but didnt quite know what to look for. Basically i have a 60 in the rear of my YJ (not HP) and i want to get more ground clearance. options:

shave the bottom lip = 1/4" - 1/2" clearance

Cut the bottom of the center section off and weld a plate in, like dynatracs. Id like more info in this direction. How do i do it?

i heard if you send Dynatrac your center section, theyll send you a new one thats been cut and had a plate welded in the botton for $250. Is this true.

Please help,

Ryan
Old Scout
10-23-2002, 06:21 PM
Search is easy! PRESS HERE (http://www.pirate4x4.com/forum/search.php?s=&action=showresults&searchid=304589&sortby=&sortorder=)

OVER 58 posts of shaved 60 info!:rolleyes:

And this one just two days ago:
http://www.pirate4x4.com/forum/showthread.php?s=&threadid=87801
John Deere Ranger
10-23-2002, 06:39 PM
well put there old scout
Cutch
10-24-2002, 12:10 PM
Originally posted by Ruckus

i heard if you send Dynatrac your center section, theyll send you a new one thats been cut and had a plate welded in the botton for $250. Is this true.

Please help,

Ryan


I asked Dynatrac for you. Got a response real quick.

Here is what they said:
No. We don't like to send things out that are suspect. In our findings, the stock housings simply can't keep good gear mesh over time after being cut. Again, your experiences and those of others may vary, but we don't No. We don't like to send things out that are suspect. In our findings,
the stock housings simply can't keep good gear mesh over time after being cut. Again, your experiences and those of others may vary, but we don't recommend it.
cmk
10-24-2002, 12:14 PM
Originally posted by Cutch
I asked Dynatrac for you. Got a response real quick.

Here is what they said:


Wow, the boys are Dynatrac sure sound like a broken record. :rolleyes:

cmk
Sundowner
10-24-2002, 12:28 PM
No. We don't like to send things out that are suspect. In our findings, the stock housings simply can't keep good gear mesh over time after being cut

OH DEAR GOD!
thatnk god I didn't cut my 14 bolt yet.
I'll just toss it on the trashheap and whip out my platinum card so that I can call Dynatrac for a custom axle this very instant!
thank you Dynatrac Man, oh thank you!!!
Beast40
10-24-2002, 03:06 PM
Originally posted by Sundowner


OH DEAR GOD!
thatnk god I didn't cut my 14 bolt yet.
I'll just toss it on the trashheap and whip out my platinum card so that I can call Dynatrac for a custom axle this very instant!
thank you Dynatrac Man, oh thank you!!!


Don't hate, if you could afford F+R ProRocks you would run them. :flipoff2: