Tx Outlaw
10-24-2002, 07:40 PM
I thought this part was a thing of beauty.....
http://a7.cpimg.com/image/09/5B/13628937-ad2b-028001E0-.jpg
but then I added this......
http://a2.cpimg.com/image/54/5D/13629012-0bd3-028001E0-.jpg
and it's all gonna be perched on top of this.......
http://a9.cpimg.com/image/5B/5D/13629019-e263-028001E0-.jpg
this weekend! Next is another call to Jess for the rear driveshaft.
Chuck
Sharp
10-24-2002, 08:06 PM
is that a goferit skid? and do the drop spacers come with it or what?
do you plan on using them or can the skid be mounted flush without them?
thanks,
the atlas must be nice....
Tx Outlaw
10-24-2002, 08:32 PM
Good eye! Yes, it's a goferit skid. The drops are an extra $15. I'm hoping not to use them, but got them just in case. I'm wanting to clock the Atlas as much as possible AND remove as much of the body lift as possible - it's a 3" right now. We'll see how it all works out real soon.
Chuck
Po' riggity
10-24-2002, 11:03 PM
Nice score dude! I have a sorta off topic question for you, but are you running a high pinion or low pinion axle? Im trying to figure out if I can get the goferit skid to work without the spacers, and with my 8.8 rear.
Scott
cord318
10-25-2002, 05:58 AM
I was thinking of doing a flat skid when I did the Atlas. I figured I could get away with it with the Hi-Pinion and the added DS length but, decided not to press my luck. If it helps my rear DS was damn near parallel with the ground at 6" of lift.
Cord
Tx Outlaw
10-25-2002, 05:55 PM
Originally posted by Ketchup Dog
Nice score dude! I have a sorta off topic question for you, but are you running a high pinion or low pinion axle? Im trying to figure out if I can get the goferit skid to work without the spacers, and with my 8.8 rear.
Scott
Well, it's going in with a 14-bolt rear axle that's been pushed back 6.5"
You might hollar at Sheldon. He'll let you know if you're gonna have problems or not - seems he'd rather for-go a sale than make someone mad. I like businesspeople like that!
Chuck