|
Azrckcrawler 10-25-2002, 11:54 AM Found this site while following a thread in the jeep section. There's some good shots of this cage and of chopping the entire back end off a Zuk. http://www.bluetorchfab.com/jf_zuk.htm Azrckcrawler 10-25-2002, 11:55 AM I like this shape. http://www.bluetorchfab.com/RP19.JPG Azrckcrawler 10-25-2002, 12:00 PM There's actually quite a few Zuks covered on that site. This one almost looks like a small Bronco. http://www.bluetorchfab.com/images/ZK37.JPG zuk_crwlr 10-25-2002, 12:03 PM i like the "little bronco" cage it however what does the dip in the front hoop do? or is it just for looks?? -Jon:confused: Azrckcrawler 10-25-2002, 12:03 PM This back end is pretty cool, needs a cooler mount tho. http://www.bluetorchfab.com/images/SB9.JPG Azrckcrawler 10-25-2002, 12:11 PM Most likely for looks. If you browse thru some of their other projects they use that same styling cue. Another cool cage. http://www.bluetorchfab.com/DAN609L.JPG SilverZuk 10-25-2002, 01:09 PM A cage is my next project. I've got a few questions but haven't researched it yet. I will when I get working on it. My biggest question is where to attach the front loop to the frame. I still need to look at some, search, and then decide. I'm still pre-planning for now scwafish 10-25-2002, 01:44 PM Those are great looking cages...never heard of that shop before. Pappa Smurf 10-25-2002, 04:20 PM what do you need this for you just built one NC Zuk 10-25-2002, 04:53 PM Originally posted by zuk_crwlr i like the "little bronco" cage it however what does the dip in the front hoop do? or is it just for looks?? -Jon:confused: I think it is just bent. Could have been rolled in another zuk and transplanted???? Who knows. Thanks Chris for the link :D Azrckcrawler 10-25-2002, 05:23 PM Originally posted by nozuk what do you need this for you just built one This is a good link for anyone who's thinking about building a cage. Plus, I'll eventually re-do my front end to make it tie in with the back. tZUKnami 10-25-2002, 07:11 PM I like this shape. I made mine a halo design also. It came out quite nicely. BlueTorch 10-26-2002, 01:34 PM Originally posted by NC Zuk I think it is just bent. Could have been rolled in another zuk and transplanted???? Who knows. Thanks Chris for the link :D I just thought I would clear up the confusion about some of the cages on my site. The Zuk cage and a few of the others have a dip inthe front of the cage. It was placed in the cage for looks. In some ways it keeps the cage from looking like a box. The bar on the front of the Zuk goes down and forward at the same time. The cage in the Zuk is not from a rolled Zuk. There is a CJ cage and a YJ cage that do something similar. As you can see in the picture below. http://www.bluetorchfab.com/images/DS31.JPG I am about to build bumpers and nerf bars on this Zuk, so check back for updates. Thanks, Dan www.bluetorchfab.com BlueTorch 10-26-2002, 01:36 PM The way I wrote the reply above looks like I am calling the CJ a ZUK. I am going to build bumpers on the green Zuk on my site. Sorry for the mix up. Thanks, Dan Rockrat 10-26-2002, 02:25 PM Nice work looks very detailed and well planed marcutah 10-26-2002, 02:28 PM I lke your designs, too bad your in Alabama not utah :-P NC Zuk 10-26-2002, 05:42 PM Originally posted by BlueTorch The cage in the Zuk is not from a rolled Zuk. Thanks, Dan www.bluetorchfab.com Hey dan, I was just throwing a little joke out there. As for the cage, thanks for getting back to me (Art) so fast with your info. oh, just because it wouldn't be right if I didn't...... :flipoff2: Welcome to the board newbie :flipoff2: CSR 10-26-2002, 06:29 PM I've seen some of Dan's handywork in person, he does excellent work. I 'wheel with Jason (Blue YJ) at Tellico a few times every year..... the vanity plate is correct, it'll go! I really like the cage in Joey's new Zuk! scwafish 10-27-2002, 05:32 AM I really like the cage in Joey's new Zuk! Me too, the more I look at it the more I like it. bobaki 10-27-2002, 12:23 PM good stuff..........................:D BlueTorch 10-27-2002, 01:32 PM Hey thanks for checking out my website. If I can ever help any of you guys out just give me shout. Thanks, Dan www.bluetorchfab.com TTURokToy 10-27-2002, 02:06 PM How much do one of them cages cost? Azrckcrawler 10-28-2002, 05:44 AM Originally posted by BlueTorch I just thought I would clear up the confusion about some of the cages on my site. The Zuk cage and a few of the others have a dip inthe front of the cage. www.bluetorchfab.com I like your work, you have a good eye for making a cage look (for lack of a better word) right. | |