We make 4 different Panhard / Trackbar brackets and I get alot of questions as to why not just one?

Here is the simple answer. You are either replacing a weak factory bracket that has broken and need something stronger and more versatile or you are swapping a new axle into your rig and need something that works better or is more adaptable!

http://www.ruffstuffspecialties.com/gallery/albums/userpics/10001/Panhard%20section%20pic.jpg

We make 2 for the axle end and 2 for the frame end. In this pic, from the top left (going clockwise) we have the Axle Offset Bracket because 70-80% of the time you need the additional room on the axle. Next we have the Axle Centered Bracket for those of you that can work with one, both have 3 height adjustment positions. The lower right shows the Frame Outside Bracket for those of you going full width and to the left the Frame Inside bracket for the relatively stock width axle. The Frame brackets both have 2 mounting positions so matching up is easy.


Remember, Selection is always the key! We have been making these for 4 years but I don't think I ever posted these here...No time like the present!

We also make the complete kit with the DOM to keep the cost down for you! http://www.ruffstuffspecialties.com/catalog/PANKIT.html

http://www.ruffstuffspecialties.com/catalog/graphics/00000001/panhard%20kit.jpg

Time to figure it out and get it together :)

Variety so you can fit it up right!

We can help you locate that axle!

The trouble with making a good selection for a panhard can it work for you? We give you the selection to make just about anything possible!

Nice to see the response!

I need the out side the frame and axle center brackets. Shiped to 87401:smokin:

That would be $52 before the PBB10 discount, $46.80 after and 11.50 to ship, thanks Danny!

No sale needed, these have always been fair priced!

Just an FYI, we are out of the Frame Outside Panhard bracket til Tuesday...

Freedom of choice is the key here!

Just like alot of things, there is not a one size fits all. Thats why we make the options you need...:)

Just like alot of things, there is not a one size fits all. Thats why we make the options you need...:)
Time to make the difference obvious, every rig will be different from the next and position always has to be determined. We give you the options you need!

These make the fit up easy, and fairly priced makes it easy on your wallet. Don't listen to the hype, compare prices and make the decision for yourself :)

The easy way ;)

I know panhard bars can be challenging but this helps...

Choices mean you don't always have to cut up something to make it work!

I am really suprised more companies don't offer all the choices you need? Every vehicle will be different...

We only make them the way you need them!

Time to get yours ;)

Adding the DOM and the heims was a big deal! Thanks for buying so many of these :)

And a good morning to you!